Humidity Sensors
Litronic FMS | Reliable Moisture Measuring System
 

Litronic FMS | Reliable Moisture Measuring System

Our comprehensive programme expansion in the product line of moisture measurement technology includes sensor systems for the determination of moisture, water content as well as layer thickness and weight per unit area. Liebherr, as our cooperation partner, has many years of experience in the field of capacitive measurement technology, which is used here. Through this capacitive measurement of moisture and water content, our Litronic FMS sensor system provides the important information to control and regulate our customers' process chains in real time (in situ). In this way, we enable our customers to achieve significant increases in efficiency through optimised use of resources.

 

Feuchtigkeitssensor

Litronic FMS planar sensor P78

Type: Planar sensor P78

Features

  • Sensor for the determination of moisture in bulk solids and liquids
  • Purely capacitive measuring method
  • Sensor exchange without recalibration
  • Sensitivity adjustable in 3 steps
  • Integrated microprocessor with average value calculator
  • Material flow detection
  • Temperature compensation
  • Limit value investigation
  • Direct digital measured value determination
  • Highly wear-resistant ceramic shield
  • Stainless steel housing

Feuchtigkeitssensor

Litronic-FMS planar sensor P78-E21

Type: Planar sensor P78-E21

Features

  • Sensor for the determination of moisture in bulk solids and liquids
  • Suitable for use in hazardous areas 2D - Zone 21
  • Purely capacitive measuring method
  • Integrated microprocessor with average value calculator
  • Material flow detection
  • Temperature compensation
  • Limit value investigation
  • Direct digital measured value determination
  • Highly wear-resistant ceramic shield
  • Stainless steel housing

Feuchtigkeitssensor

Litronic-FMS planar sensor P78-E22

Type: Planar sensor P78-E22

Features

  • Sensor for determining the moisture in bulk solids and liquids
  • Suitable for use in hazardous areas 3D - Zone 22
  • Purely capacitive measuring method
  • Integrated microprocessor with average value calculator
  • Material flow detection
  • Temperature compensation
  • Limit value investigation
  • Direct digital measured value determination
  • Highly wear-resistant ceramic shield
  • Stainless steel housing

Feuchtigkeitssensor

Litronic-FMS RMH12 pipe sensor

Type: RMH12 pipe sensor

Features

  • Direct digital measuring method
  • Extremely high capacitance resolution due to patented measuring circuit
  • 30 measurements per second with automatic reference calibration
  • High-resolution temperature measurement / compensation of liquid and measuring circuit
  • Ceramic coaxial capacitor
  • High-quality stainless steel housing
  • Resistant to aggressive liquids / oils
  • Simple process connection
  • Digital interface / networking
  • Data streaming technology

Feuchtigkeitssensor

Litronic FMS planar sensor P30-S

Type: Planar sensor P30-S

Features

  • Purely capacitive measuring method
  • Sensor exchange without recalibration
  • Sensitivity adjustable in 3 steps
  • Integrated microprocessor with average value calculator
  • Material flow detection
  • Temperature compensation
  • Limit value investigation
  • Direct digital measured value determination
  • Stainless steel housing

Feuchtigkeitssensor

Litronic-FMS planar sensor P80-CAN

Type: Planar sensor P80-CAN

Features

  • Plug-in sensor for installation in mobile machines. Use without evaluation and transfer module
  • Determination of electrical permittivity depending on material moisture content and material density
  • Reliable material moisture measurement
  • Signal transmission via CAN 2.0B
  • Mean value and median filter
  • Sensor exchange without recalibration
  • Streaming technology
  • Stainless steel housing
  • High precision and robustness

Feuchtigkeitssensor

Litronic FMS planar sensor CCS

Type: Planar sensor CCS

Features

  • Pure capacitive measuring method
  • Non-contact measurement possible
  • Temperature compensation
  • Direct digital measured value determination
  • Digital measured value transmission
  • Up to 4 sensors per evaluation module (FMS III) (Up to 16 sensors per evaluation module (FMSII))
  • High-quality stainless steel housing

Feuchtigkeitssensor

Rod sensor P45-GD EX

Type: Rod sensor P45-GD EX

Features

  • Modular rod sensor P45-GD for pipes and tanks
  • Self-sufficient measuring device for exact water content/moisture deternation in the running process
  • Sensor for highest quality and safety in EX-protected production environments
  • For processing and refining a wide variety of emulsions and bulk solids
  • Different rod lengths
  • Application range up to 100 bar
  • Pressure sensor, sliding and interchangeable fittings optional

Feuchtigkeitssensor

Litronic FMS II Evaluation and transfer module

Type: Litronic FMS II Evaluation and transfer module

Features

  • Autonomous evaluation and transfer module for recording and processing values measured by the integrated sensors
  • Measured values can be transferred to a higher-level control system in real time
  • Convenient PC software enables fast and exact calibration of the measuring section
  • Parameterisation and calibration are carried out with a standard PC (Litronic-FMS PC software)
  • Fully automatic operation
  • Manual or automatic operation
  • Channel grouping, coarse/fine switching
  • Adjustable measuring range
  • Fieldbus connection (Profibus DP optional)
  • Modular design for easy expansion
  • Mounting on standard TS35 mounting rail for easy control cabinet installation

Humidity sensor

Humidity sensor *'*

type: MEHS | ID: FI

technical features

  • Input: 0...100% rHF
  • Output: 4...20 mA
  • Supply: 12...30 V
  • Fitting length: 72...300 mm
  • Temperature range: -40...+80 °C
  • Process connection: 1/2", 3/4", 1", 1,5", 1/2NPT
  • Electrical connection: several options
  • Protection: at least IP65

Channel humidity sensor

Channel humidity sensor

type: FEUCHT | ID: FS

technical features

  • Range humidity: 0...100% relative humudity
  • Range temperature: 0...+40°C/+50°C/+100°C, -10...+90°C, -30...+60°C
  • Operating range humidity: +10...+95% relative humidity
  • Operating range temperature: -30...+80°C
  • Medium: unpressurized,non aggressive, non condensing air
  • Output: 0...20mA or 0...10V (3-/4-wire) / 4...20mA (2-wire)
  • Supply voltage: 15...30VDC or 24VAC
  • Accuracy: +/- 3,5% rH, +/- 0,8°K

Modular intelligent weather station

Modular intelligent weather station

type: MD-IWS | ID: MW

technical features

  • Reliable detection of all aqueous precipitation
  • 1 switching contact "heating on"
  • Serial interface, galvanically insulated
  • 1 input rail temperature (4...20 mA)
  • Quadruple analogue output optionally for air temperature, relative air, humidity, intensity of precipitation and air pressure
  • Intelligent self adjustment in case of soiling
  • Internal heating effective down to -30°C
  • Optional mounting device, galvanized
  • Optional display in cover of case

Humidity sensor

Humidity sensor

type: MEHS-T | ID: OI

technical features

  • Input: 0...100% rHF
  • Output: 4...20 mA
  • Supply: 12...30 V
  • Fitting length: 72...300 mm
  • Temperature range: -40...+80 °C
  • Process connection: 1/2", 3/4", 1", 1,5", 1/2NPT
  • Electrical connection: several options
  • Protection: at least IP65

Climate sensor for rooms

Climate sensor for rooms

type: RKS | ID: RK

technical features

  • Temperature: Pt 100 (2-, 3-, 4-wire)
  • Accuracy: class A - B - 1/2 DIN
  • Measuring range: -40...+80 °C
  • Humidity: 0...100 %rF
  • Output humidity: 4...20 mA / 0...10 V / 2...10 V
  • Connection: via screwed cable gland to terminal screws
  • Enclosure: cast aluminium
  • Optional: transmitter 4...20 mA / 2...10 V / 0...10 V
  • Optional: Indicator (Input: 4...20 mA)

Products "Made in Germany"


Müller Industrie-Elektronik manufactures measuring devices, sensors, transmitters, limit switches, calibrators and digital displays for industrial measuring and control technology, transmitters and amplifiers for signal processing, display devices and evaluation instruments in the region Hannover at the company location Neustadt am Rübenberge. Services such as contract manufacturing, board production, cable assembly, 3D construction, prototype construction and measuring device calibration complete the extensive product portfolio.