Pressure Measurement
Digital Strain Gauge Amplifier

Digital Strain Gauge Amplifier *'*

type: ADHM-LC | ID: LH

technical features

  • Connection: 1x strain gauge full bridge, 350 ohms
  • Input sensitivity: 1...4 mV/V
  • Configuration: via interface
  • Output: 4...20 mA
  • Supply: 12...40 VDC out of current loop
  • Electrical connection: pluggable - Combined error: 0,3% of nominal range
  • Resolution: 16 bit
  • Enclosure: stainless steel
  • Protection: IP 65

Mobile digital strain gauge amplifier

Mobile digital strain gauge amplifier

type: ADLM-HA | ID: DM

technical features

  • Input: 2 strain gauge full bridges
  • Input sensitivity: 0,1...5 mV/V
  • Analog output: 4...20 mA / 0...10 V
  • Voltage supply: accumulator
  • Resolution: 12 / 14 / 15 / 16 bit
  • Combined error: 0,2% of end scale value
  • Degree of protection: IP54
  • Adjustment: via RS232 interface or programming keys

Digital strain gauge amplifier

Digital strain gauge amplifier

type: ADLM-HD | ID: DD

technical features

  • Input: up to 4 strain gauge full bridges
  • Input sensitivity: 0,1...5 mV/V
  • Analog output: 4...20 mA / 0...10 V
  • Voltage supply: 24 VDC +/-30%
  • Resolution: 12 / 14 / 15 / 16 bit
  • Combined error: 0,2% of end scale value
  • Optionally: limit value switch / interface / vibration protection
  • Degree of protection: IP65
  • Adjustment: via RS232 interface

Digital measuring amplifier for strain gauge

Digital measuring amplifier for strain gauge

type: ADLM-LC | ID: LA

technical features

  • Input sensivity 01 to 5 mV/V
  • Programmable via RS232 interface
  • Analog output 4...20 mA and 0...10 V
  • Supply voltage 24 VDC +/- 30%
  • Combined error 0,2% FS
  • Resolution 12 / 14 / 15 / 16 bit
  • Enclosure stainless steel
  • Degree of protection IP 65

Digital strain gauge and standard signal amplifier

Digital strain gauge and standard signal amplifier

type: ADLM-NS | ID: AD

technical features

  • Input Strain gauge: up to 4 full bridges
  • Input sensitivity: 0,1...5 mV/V
  • Input standard signal: 4...20 mA, 0...10 V
  • Analog output: 4...20 mA / 0...10 V
  • Voltage supply: 24 VDC
  • Resolution: 12 / 14 / 15 / 16 bit
  • Combined error: 0,2% of end scale value
  • Optionally: limit value switch / interface
  • Degree of protection: IP20
  • Adjustment: via RS232 interface

Bubbling through pressure transducer

Bubbling through pressure transducer

type: ADLM-P | ID: EP

technical features

  • Measurement: Positive relative pressure (hydrostatic pressure)
  • Range: 0...1000 mbar, 0...50 mbar, 0...100 mbar, 0...200 mbar, 0...350 mbar
  • Output: 0..10V and 4...20mA
  • Accuracy: up to 1% of end scale value
  • Supply voltage: 24 VDC, +/-20%
  • Level measuring in all liquids possible
  • Aggressive and abrasive media are no problem
    Distance of point of bubbling through up to 50 m

Bubbling through pressure transducer with valve
ship

Bubbling through pressure transducer with valve

type: ADLM-PV | ID: EV

technical features

  • Measurement: Positive relative pressure (hydrostatic pressure)
  • Range: 0...1000 mbar, 0...50 mbar, 0...100 mbar, 0...200 mbar, 0...350 mbar
  • Output: 0..10V and 4...20mA
  • Accuracy: up to 1% of end scale value
  • Supply voltage: 24 VDC, +/-20%
  • Level measuring in all liquids possible
  • Aggressive and abrasive media are no problem
  • Distance of point of bubbling through up to 50 m

Measuring amplifier strain gauge

Measuring amplifier strain gauge

type: ALM-HD2 | ID: AJ

technical features

  • Input sensitivity (0,1 mV/V up to 4 mV/V) selectable by DIP-switches
  • Connection of max. 4 resistance strain gauge sensors (full bridge, 350 ohms)
  • Change over analog output 0 (4)...+/- 20 mA or 0 (2)...+/-10 V
  • Sensor supply voltage internally continiously adjustable (4...14 V)
  • 2 adjustable limit value switches (potential free change over contacts)
  • Accuracy +/-0,1% of end of scale value
  • Supply voltage 85...265 VAC or 24 VDC

Analog Strain Gauge Amplifier

Analog Strain Gauge Amplifier

type: ALM-NS | ID: AN

technical features

  • Input strain gauge: up to 4 full bridges (350 Ω)
  • Sensitivity strain gauge: 0,1...4 mV/V (by steps)
  • Output: 2...10 V and 4...20 mA, 0...10 V and 0...20 mA
  • Voltage supply: 42 VAC / 115 VAC / 230 VAC / 24 VAC24 VDC
    galvanically isolated
  • Limit value: 2 floating contacts (option)
  • Bridge supply: 4...14 V adjustable
  • Linearity: ± 0,02% of terminal value
  • Mounting: top hat rail
  • Measurement monitoring: sensor break
  • Adjustment limit value: no need to connect strain gauge

4-input summing amplifier

4-input summing amplifier

type: ASV | ID: SU

technical features

  • 4 inputs 0(4)...20mA, 0...10V, selectable by DIP-switches
  • Adding of input signals
  • Output, 0(4)...20mA, 0...10 V, selectable by DIP-switches
  • Accuracy +/- 0,1% of end of scale value
  • Supply voltage 115/230VAC, optionally 24VAC/DC
  • 2-wire transmitters can be supplied directly by the device

Pressure transmitter

Pressure transmitter

type: ATM | ID: PD

technical features

  • Relative, absolute or overpressure
  • Ranges from 0...0,1bar up to 0...1000bar
  • Output current or voltage
  • Supply voltage 11...33VDC
  • Accuracy 0,1% of end scale value
  • Degree of protection IP65, special types up to IP68
  • Medium contact parts and case of stainless steel (CrNi)
  • Process connection G 1/2 A, G 1/4 A, 1/2 NPT, 1/4 NPT
  • EX-protection intrinsically safe

Bending beam load cell

Bending beam load cell

type: BSW11 | ID: CE

technical features

  • Rated load: 5...500kg
  • Output: 2mV/V
  • Supply voltage: 10VDC
  • Accuracy: +/- 0,02% of end scale value
  • Degree of protection: IP67
  • Material: alloy steel / stainless steel
  • Connection: 3 m cable, 4-wire

Calibration: increased precision and reliability

Product quality, operational safety and cost effectiveness relate directly to an accurate and reliable registration of the process variables. Calibration of measuring instruments is required anywhere they are used in quality-related areas. Even the slightest of measurement errors can drastically affect the safety of production processes, or product quality. For the calibration of measuring instruments at Müller Industrie-Elektronik you will find a wide range of calibration instruments and our calibration service:


Authorised Testo dealer for portable measurement devices and thermal imagers

Simply see more with the thermal imagers from Testo: industrial thermography

Testo thermal imagers quickly and reliably detect weak spots and damage in industrial maintenance, production monitoring and in Research and Development. Materials and components are tested completely without damage thanks to an image creation process. Problem zones are identified without contact before a malfunction or a fire risk occurs. Whereas other methods, cable or pipeline systems must be exposed over a large area, Testo thermal imager recognize with high infrared image quality and innovative technology such as SuperResolution or SiteRecognition the weak spots and damages reliably and provide for thermally optimised assemblies.

M12 Connector with screw connection

Connector M12 with screw connection

Typ: M12 | ID: --

technical features

  • Connector M12 with screw connection
  • A-coded
  • Male, straight | Male, angled
  • Female, straight | Female, angled
  • PG7 in 4-pole / 5-pole
  • PG9 in 4-pole / 5-pole / 8-pole
  • Housing main material: PA, black
  • Cable diameter: 4…6 mm (PG7) /             6…8 mm (PG9)
  • Wire cross-section, min. / max.:                 0,14…0,75 mm²
  • Rated current: 4 A
  • Rated voltage: 250 V
  • Protection degree: IP 67
  • Contact surface: CuSnZn
  • Temperature range of housing: -25…+85 °C

M12 Connector with cable

Connector M12 + PVC cable

Typ: M12 + PVC cable | ID: --

technical features

  • Connector M12 one side open sensor cable
  • A-coded
  • Male, straight | Male, angled
  • Female, straight | Female, angled
  • 4-pole | 5-pole | 8-pole
  • Cable characteristic: PVC, black
  • Rated current: 4 A | 2 A (8-pole)
  • Rated voltage: 250 V (4-pole) |                   125 V (5-pole) | 30 V (8-pole)
  • Protection degree: IP 67
  • Core cross-section: 0,34 mm² | 0,25 mm²
  • Contact surface: gold-plated
  • Temperature range of housing: -25…+85 °C

M12 Connector, shielded, with screw connection

Connector M12, shielded, with screw connection

Typ: M12, shielded | ID: --

technical features

  • Connector M12 with screw connection
  • shielded, A-coded
  • Male, straight | Male, angled
  • Female, straight | Female, angled
  • PG9 in 4-pole / 5-pole / 8-pole
  • Housing main material: CuZn
  • Cable diameter: 6…8 mm (PG9)
  • Wire cross-section, min. / max.:                 0,14…0,5 mm²
  • Rated current: 4 A
  • Rated voltage: 250 V (4-pole) /                   125 V (5-pole)
  • Protection degree: IP 67
  • Contact surface: gold-plated
  • Temperature range of housing: -25…+85 °C

M8 Connector with cable

Connector M8 + PVC Cable

Typ: M8 + PVC Cable | ID: --

Technische Features

  • Connector M8 one side open sensor cable
  • Male, straight | Male, angled
  • Female, straight | Female, angled
  • 3-pole | 4-pole
  • Cable characteristic: PVC, black
  • Rated current: 4 A
  • Rated voltage: 60 V (3-pole)/ 30 V (4-pole)
  • Protection degree: IP 67
  • Core cross-section: 0,25 mm²
  • Contact surface: gold-plated
  • Temperature range of housing: -25…+85 °C

Connector valve plug

Valve plug typ A

Typ: Valve plug typ A | ID: --

technical features

  • Valve plug typ A DIN EN 175301-803
  • Number of pols: 3P (2+PE), 4P (3+PE)
  • Rated current: 10 A
  • Rated voltage: 250 V
  • Cable entry: 6…8 mm (PG9),                      8…10 mm (PG11)
  • Contact gap: 18 mm
  • Protection degree: up to IP 65

Digital indicator -

current loop display (flush-type)

type: CULO-B | ID: CB

technical features

  • Input: 4...20 mA current loop
  • Option: 0(4)...20 mA, 0...10 V (external supply
  • Supply: current loop, 24 VDC, 125/230 VAC
  • Range of indication: programmable von -999...9999
  • Programming: via 3 keys
  • Unit: digit 4 programmable (°C/°F)
  • Limit contact: electronically, Option: Relay
  • Protection: IP 65 (front)
  • Housing: plastics polycarbonate

Digital indicator -

current loop display in robust field enclosure

type: CULO-F | ID: CF

technical features

  • Input 1: 4...20 mA (current loop)
  • Supply 1: out of current loop
  • Input 2: (0)4...20 mA / 0...10 V (external supply)
  • Supply 2: 115/230 VAC / 24 VDC (no galvanical insulation)
  • Limit contacts: 2 open collectors / 2 relays
  • Display range: -999...9999
  • Memory: minimum/maximum
  • Unit: dimension strip (fixed under front foil)
  • Enclosure: ABS/FR / diecast aluminium
  • Protection: IP 66 (enclosure)
  • Measuring fault: ±0,2% of range, ±1 digitInput: 4...20 mA current loop

Digital indicator -

current loop display with limit switch

type: CULO-G | ID: CG

technical features

  • Input: 4...20 mA current loop
  • Option: 0...20 mA, 0...10 V (external supply
  • Supply: current loop, 24 VDC
  • Range of indication: programmable von -999...9999
  • Voltage across: below 3,2 V
  • Programming: via 3 keys
  • Unit: digit 4 programmable (°C/°F)
  • Limit contact: electronically, 36 VDC / 150 mA
  • Protection: front IP 67
  • Housing: DIN BUZ-H head, wall-, tube mounting

Digital indicator - current loop display

type: CULO-L | ID: CL

technical features

  • Mounting: in housings >IP20
  • Input: 4...20 mA current loop
  • Range of indication: programmable -999...9999
  • Voltage across: below 3,2 V
  • Programmind: via 3 keys
  • Unit: digit 4 programmable (°C/°F)
  • Option: II 2G Ex ia IIC T6
  • Option: II 3G Ex nR II T6
  • Protection: front IP 67
  • Housing: DIN BUZ-H head, wall- tube mounting, built-on

CULO-M - current loop display  with ATEX approval

Digital indicator -

current loop display with ATEX approval

type: CULO-M | ID: CM

technical features

  • Input: 4...20 mA current loop
  • Voltage across: ca. 3,2 V
  • Display range: adjustable -999...9999
  • Memory: Minimum / maximum
  • Adjustment: 3 keys on the back
  • Unit: Digit 4 programmable (°C/°F)
  • Option Ex protection: II 2 G Ex ia IIC T6
  • Unit: Dimension strip under front foil
  • Protection: Front IP67, back IP20, electronics potted
  • Enclosure: 96x48 mm for flush mounting
  • Mounting depth: ca. 30 mm

Digital 2-axis inclination sensor

Digital 2-axis inclination sensor

type: D2NE-HD | ID: DW

technical features

  • Measuring range +/-45° (each axis)
  • Analog output 4...20 mA / 0...10 V
  • Supply 24 VDC +/-20% / 12 VDC +/-20%
  • Resolution better than 0,1°
  • Optionally: interface / display / limit value switch
  • Protection: IP65
  • Sensor operates absolutely without wearing

Data Logger DL-DYDAQLOG

Data Logger DL-DYDAQLOG

Type: DL-160-16-D

Technical Features

  • Sensor input: 16 x analogue (differential) ± 20 mA / 0…20 mA, 6 x digital (opto-decoupled)
  • Sensor signal: thermocouples type B, E, J, K, N, R, S, T, PT50 / 100 /500 / 1000, resistors, measuring bridges (6-wire technology)
  • Output: 6 x digital (electronic relays)
  • Power supply: 10…36 VDC
  • Operating temperature range: 0…+40 °C
  • Housing: Aluminium,splash-water protected
  • Interfaces: WLAN / LAN
  • Options: 2G/4G mobile radio (sending messages, e-mails)
  • Software: for further processing of the data

Data Logger DL-FieldLogger

Data Logger DL-FieldLogger

Type: DL-FieldLogger

Technical Features

  • Input/Output: 8 x Universal analog inputs / 2 x Relay outputs
  • Input Analog: Thermocouples (J, K, T, N, E, R, S and B), 0…5 V, 0…10 V, mV, mA, 4…20 mA, Pt100 and Pt1000
  • Channels: 128 virtual channels
  • Sampling rate: 1000 readings/second (24-bit A/D conversion)
  • Memory: up to 512,000 records
  • Memory expansion SD or SDHC card
  • Display: 2.4" QVGA screen and 96 x 48 mm format, On-screen menu with current channel value, History diagram and status information
  • Alarms: 32 configurable alarms (with local, remote or virtual channels)

Data Logger DL-io-key

Data Logger DL-io-key

Type: DL-io-key

Technical Features

  • True Plug & Play with IO-Link: Commissioning in <1 minute
  • Manufacturer-independent compatibility with over 10,000 sensors
  • Autonomous wireless connection via NB-IoT and 2G network
  • Monitor and manage sensor data in the cloud
  • E-Mail and SMS notification in case of value changes
  • No intervention in IT or system infrastructure necessary

Data Logger DL-LogBox-Wi-Fi

Data Logger DL-LogBox-Wi-Fi

Type: DL-LogBox-Wi-Fi

Technical Features

  • Input Signal: 1 digital input / 3 analog inputs
  • Input Analog: Thermocouples J, K, T, N, E, R, S, B, Pt100, 0…50 mV, 0…5 V, 0…10 V, 0…20 mA, 4…20 mA
  • Internal Sensors: NTC for temperature, battery voltage and external power supply
  • Display: 3 lines with 4½ digits
  • Memory Capability: 140.000 records
  • Acquisition Interval: 1 seconds to 18 hours
  • Alarms: 8 Alarms (two per channel) min and max
  • Protection: IP 40
  • Dimensions: 120 x 100 x 40 mm

Data Logger DL-TagTemp-NFC

Data Logger DL-TagTemp-NFC

Type: DL-TagTemp-NFC

Technical Features

  • Sensor: External temperature sensor
  • Measuring Range: -40°C to 70°C
  • Temperature Accuracy: ± 0.5°C to 25°C ± 1.0°C span
  • Resulution: 0.1°C
  • Memory Capacity: 4020 records
  • Acquisition Interval: Programmable from 1 minute up to 4 hours
  • Interface: RFID ISO 15693/NFC-V
  • Battery Runtime: More than 1 year (30 min acquisition interval), non-replaceable
  • Housing: Polyamide
  • Protection: IP 68

Data Logger DL-TagTemp-NFC-LCD

Data Logger DL-TagTemp-NFC-LCD

Type: DL-TagTemp-NFC-LCD

Technical Features

  • Sensor: External Temperature sensor
  • Measuring Range: -40°C to +100°C
  • Temperature Accuracy: ± 1.0°C span
  • Resulution: 0.1°C
  • Memory Capacity: 4020 records
  • Acquisition Interval: Programmable 1 min. to 4 hours
  • Interface: RFID ISO 15693/NFC-V
  • Battery Runtime: More than 2 years (30 min acquisition interval), replaceable
  • Housing: ABS + Polycarbonat
  • Protection: IP 55

Data Logger DL-TagTemp-Stick

Data Logger DL-TagTemp-Stick

Type: DL-TagTemp-Stick

Technical Features

  • Sensor: Internal Temperature sensor
  • Measuring Range: -20°C to 70°C
  • Temperature Accuracy: ± 0.5°C to 25°C ± 1.0°C span
  • Resolution: 0.1°C
  • Memory Capacity: 32000 records
  • Acquisition Interval: Programmable 5 seconds to 18 hours
  • Interface: USB
  • Battery Runtime: 2 years (15 min interval)
  • Housing: Polyamide
  • Protection: IP 67

Data Logger DL-ToolBox 4.0

Data Logger DL-ToolBox 4.0

Type: DL-ToolBox 4.0

Technical Features

  • Sensor input: 8 x analogue 4...20 mA, 2 x digital also configurable as counter
  • Sensor signal: temperature / vibration / speed / level / differential pressure / torque / humidity / force / position / operating hours and switching times / all physical variables
  • Output: 3 x digital (normally closed / normally open)
  • Supply: 24 VDC
  • Temperature range: -30…+60 °C
  • Protection class: IP 66/67
  • Interfaces: USB / LAN
  • Options: 2G/4G mobile radio / Bluetooth/WLAN / GPS positioning / NFC
  • Software: for further processing of the data

Multifunctional data logger

Multifunctional Data Logger

type: DLUI-HD | ID: LM

Technical Features

  • Sensor input: 4 / 8 / 12 (analog and digital)
  • Sensor signal: Current / Voltage / Pulse / RTD
  • Accuracy: dependent on used sensors
  • Display: 7" Touchpanel Colour TFT, transmissive
  • Output: 4 relays, freely programmable
  • Supply: 100...240 VAC / 24 VDC
  • Interfaces: USB / USB-PC / Ethernet / Serial
  • Sensor supply: 24 VDC, 130 mA (each sensor)
  • Enclosure: Built-on / Flush mounting
  • Software: for processing the data
  • Options: Webserver / Statistic module / Measuring rate

HART-Modem USB

HART-Modem USB

Type: DEV-HM | ID: --

technical features

  • Active operation: current loop is supplied too
  • Passive operation: used in an existing current loop
  • PC interface: virtual serial port
  • Supply: out of USB connection
  • USB specification: 2.0 compatiblel
  • Protection: IP20
  • Galvanical insulation: between USB and HART
  • Case: ABS, 105x66x20 mm

Configurator Modem Analog

Configurator Modem Analog

Type: DEV-KMA | ID: DK

Technical Features

  • PC interface: virtual serial port
  • Supply: out of USB connection
  • Current consumption: max. 350 mA
  • Connection transmitter: alligator clamps / M12, 4-pole
  • Connection PC: USB type A
  • Connection multimeter: bunch plugs
  • USB specification: 2.0 compatible
  • Protection: IP20
  • Case: ABS, 82x51x17 mm
  • Operating systems: Windows XP , Win 7, Win 8, Win 10
  • Software (included): TrComm

RFID Programmer

RFID Programmer

type: DEV-RP | ID: ▒

technical features

  • Programming device for setting ISO 15693-compatible target devices
  • for connection to Windows PC with XP and newer
  • Management programm allows three functions:
  • Reading mode: read converter
  • Writing mode: Write parameters in converterEditing mode: Set parameters for the first time
  • Editing mode: Set parameters for the first time

Measuring values visualise and supervise

Measuring and monitoring tasks can be quickly and flexibly visualized and evaluated with digital displays - either for panel mounting or wall mounting. Müller Industrie-Elektronik offers a wide range of display and information systems for industrial communication for all standard input signals used in industrial applications. These include compact digital displays as built-in instruments, setpoint generator or surface mounted equipment up to widely visible large displays with different digit heights. Typical applications for digital displays include factory automation, production control, process visualization, environmental engineering, logistics and transportation.




.
Compression load cell

Compression load cell

type: DKW14 | ID: CV

technical features

  • Capacity 1 kN up to 1000 kN
  • Output strain gauge full bridge, 2 mV/V
  • Supply voltage 10 VDC
  • Accuracy +/- 0,1% of end scale value
  • Degree of protection IP67
  • Low height
  • Application of force with adaptor
  • Connection with cable, MIL-plug, Cannon-plug, RSF4-plug

Compression load cell

Compression load cell

type: DKW14B | ID: CW

technical features

  • Nominal load: 0,1 t up to 30 t
  • Output: strain gauge full bridge, 2 mV/V
  • Voltage supply: 9...12 VDC
  • Accuracy: +/- 0,2% of range
  • Temperature range: -20...+55 °C
  • Safe overload: 120% of nominal range
  • Material: alloy steel
  • Protection: IP66
  • Connection: 3 m cable

Digital load measuring system

Digital load measuring system

type: DLM-HD | ID: LS

technical features

  • TÜV approval for use in systems with AK4
  • µP-device for simple programming
  • 4 resistance strain gauge full-bridge sensors
  • 2 adjustable limit switches, relay output with restraint
  • Configurable analog output, 0...1(10)v or 0(4)...20mA galvanic insulation
  • Interfaces RS232, RS485, Interbus S, LWL, CANbus, Profibus galvanically insulated
  • Tare - function
  • Redundant construction for limit switch and test equipment, monitoring of sensor break and short circuit
  • Accuracy +/- 0,1% of end scale value

Digital hand-held multimeter

Digital handheld multimeter

type: DM1-HA

technical features

  • Input: current AC/DC, voltage AC/DC
  • Input: resistance, capacitance, frequency, temperature
  • Display: 3,75 digits (3999)
  • Accuracy: 0,5...1,5% of range
  • Operation temperature: 0...40 °C
  • Weight: approx. 200 g
  • Supply: 2x 1,5 V (Micro Cell AAA)
  • Contained in delivery: batteries, 1 set measuring cable, probe type K

Digital strain gauge amplifier

Digital strain gauge amplifier

type: DR-ADLM | ID: BD

technical features

  • Input Strain gauge: up to 2 full bridges, 0(4)...20 mA, 0...10 V
  • Input sensitivity: 0,1...5 mV/V
  • Analog output: 4...20 mA / 0...10 V
  • Voltage supply: 24 VDC
  • Resolution: 12 / 14 / 15 / 16 bit
  • Combined error: 0,2% of end scale value
  • Optionally: interface
  • Degree of protection: IP20
  • Adjustment: via RS485 or USB interface

Analog Summing Amplifier 4-Channel

Analog Summing Amplifier 4-Channel

type: DR-AS4K | ID: ▒

technical features

  • Function: Arithmetic mean of input signals
  • Input: 2...4x 4...20 mA
  • Output: 1x 4...20 mA
  • Supply: 24 VDC
  • Current consumption: ca. 50 mA (without input signals)
  • Connection: 4 plug-in terminal stips, 4-pole
  • Temperature range: -10...60 °C (ambient)
  • Protection: IP20
  • Enclosure: DR22,5 made of PA66 GF30

Standard signal transmitter 0...20 mA

Standard signal transmitter 0…20 mA *'*

type: DRMU-S2 - DRCU-S2  | ID: DR series 2

technical features

  • Input: 0…20 mA
  • Input resistance: 27 Ω
  • Output: 4…20 mA current loop
  • Supply: Current loop
  • Electrical connection: 2…6 plug-in terminal strip
  • Limit vale contacts: without
  • Protection: IP20
  • Accuracy: see data sheet
  • Enclosure: for DIN rail

Converter for potentiometer

Converter for potentiometer *'*

type: DRMU-S2 - DRPO-S2  | ID: DR series 2

technical features

  • Input: 3,3 kΩ
  • Measuring current: 0,15 mA
  • Output: 4...20 mA current loop
  • Supply: Current loop
  • Electrical connection: 2...6 plug-in terminal strip
  • Limit vale contacts: without
  • Protection: IP20
  • Accuracy: see data sheet
  • Enclosure: for DIN rail

RTD Pt100 amplifier

RTD Pt 100 amplifier *'*

type: DRMU-S2 - DRRT-S2  | ID: DR series 2

technical features

  • Input: 1 RTD Pt100 (2-,3-,4-wire)
  • Output: 4...20 mA current loop
  • Supply: Current loop
  • Electrical connection: 2...6 plug-in terminal strip
  • Limit vale contacts: without
  • Protection: IP20
  • Accuracy: see data sheet
  • Enclosure: for DIN rail

Strain gauge amplifier

Strain gauge amplifier *'*

type: DRMU-S2 - DRSG-S2  | ID: DR series 2

technical features

  • Input: 1 strain gauge full bridge
  • Bridge resistance: 350 Ω minimum
  • Output: 4...20 mA current loop
  • Supply: Current loop
  • Electrical connection: 2...6 plug-in terminal strip
  • Limit vale contacts: without
  • Protection: IP20
  • Accuracy: see data sheet
  • Enclosure: for DIN rail

Standard signal transmitter 0...10 mA

Standard signal transmitter 0...10 V *'*

type: DRMU-S2 - DRVO-S2  | ID: DR series 2

technical features

  • Input: 0...10 V
  • Input resistance: 20 kΩ
  • Output: 4...20 mA current loop
  • Supply: Current loop
  • Electrical connection: 2...6 plug-in terminal strip
  • Limit vale contacts: without
  • Protection: IP20
  • Accuracy: see data sheet
  • Enclosure: for DIN rail

Converter for resistance

Converter for resistance *'*

type: DRMU-S2 - DRWI-S2  | ID: DR series 2

technical features

  • Input: 3,3 kΩ
  • Measuring current: 0,15 mA
  • Output: 4...20 mA current loop
  • Supply: Current loop
  • Electrical connection: 2...6 plug-in terminal strip
  • Limit vale contacts: without
  • Protection: IP20
  • Accuracy: see data sheet
  • Enclosure: for DIN rail

Standard signal transmitter 0...20 mA

Standard signal transmitter 0...20 mA *'*

type: DRMU-S4 - DRCU-S4 | ID: DR series 4

technical features

  • Input: 0...20 mA
  • Input resistance: 27 Ω
  • Output: 4...20 mA current loop
  • Supply: 24 VDC, 85...250 VAC, current loop
  • Electrical connection: 2...6 plug-in terminal strip
  • Limit vale contacts: 2x electronically,
    2x relays
  • Protection: IP20
  • Accuracy: see data sheet
  • Enclosure: for DIN rail

Converter for potentiometer

Converter for potentiometer *'*

type: DRMU-S4 - DRPO-S4 | ID: DR series 4

technical features

  • Input: 3,3 kΩ
  • Measuring current: 0,15 mA
  • Output: 4...20 mA current loop
  • Supply: 24 VDC, 85...250 VAC, current loop
  • Electrical connection: 2...6 plug-in terminal strip
  • Limit vale contacts: 2x electronically,
    2x relays
  • Protection: IP20
  • Accuracy: see data sheet
  • Enclosure: for DIN rail

RTD Pt100 amplifier

RTD Pt100 amplifier *'*

type: DRMU-S4 - DRRT-S4 | ID: DR series 4

technical features

  • Input: 1 RTD Pt100 (2-,3-,4-wire)
  • Output: 4...20 mA current loop
  • Supply: 24 VDC, 85...250 VAC, current loop
  • Electrical connection: 2...6 plug-in terminal strip
  • Limit vale contacts: 2x electronically,
    2x relays
  • Protection: IP20
  • Accuracy: see data sheet
  • Enclosure: for DIN rail

Strain gauge amplifier

Strain gauge amplifier *'*

type: DRMU-S4 - DRSG-S4 | ID: DR series 4

technical features

  • Input: 1 strain gauge full bridge
  • Bridge resistance: 350 ohms minimun
  • Output: 4...20 mA current loop
  • Supply: 24 VDC, 85...250 VAC, current loop
  • Electrical connection: 2...6 plug-in terminal strip
  • Limit vale contacts: 2x electronically,
    2x relays
  • Protection: IP20
  • Accuracy: see data sheet
  • Enclosure: for DIN rail

Standard signal transmitter 0...10 mA

Standard signal transmitter 0...10 V *'*

type: DRMU-S4 - DRVO-S4 | ID: DR series 4

technical features

  • Input: 0...10 V
  • Input resistance: 20 kΩ
  • Output: 4...20 mA current loop
  • Supply: 24 VDC, 85...250 VAC, current loop
  • Electrical connection: 2...6 plug-in terminal strip
  • Limit vale contacts: 2x electronically,
    2x relays
  • Protection: IP20
  • Accuracy: see data sheet
  • Enclosure: for DIN rail

Converter for resistance

Converter for resistance *'*

type: DRMU-S4 - DRWI-S4 | ID: DR series 4

technical features

  • Input: 3,3 kΩ
  • Measuring current: 0,15 mA
  • Output: 4...20 mA current loop
  • Supply: 24 VDC, 85...250 VAC, current loop
  • Electrical connection: 2...6 plug-in terminal strip
  • Limit vale contacts: 2x electronically,
    2x relays
  • Protection: IP20
  • Accuracy: see data sheet
  • Enclosure: for DIN rail

Double RTD transmitter

Double RTD transmitter

type: DRMU-W | ID: BW

technical features

  • Input: 2x RTD Pt100, 3-wire
  • Output: 2x 4...20 mA (Current loop)
  • Voltage supply: 2x 10...35 VDC
  • Mounting: on top hat rail
  • Temperature ranges: within -50...+400 °C
  • Accuracy: at least 0,5% of range
  • Protection: IP20
  • Enclosure: DR22,5 made of plastic PA66 GF30
  • Connection: plug-in terminal strips

Summin amplifier for resistance strain gauge

Summing amplifier for resistance strain gauge

type: DSV | ID: DV

technical features

  • 4 inputs resistance strain gauge, full bridges
  • Addition of single measure values
  • 1 output for connection to every measuring amplifier with input for resistance strain gauge bridges
  • Cascading of several summing amplifiers is possible
  • External power supply for the bridges can be connected on demand

Sixfold strain gauge summing-up box

Sixfold strain gauge summing-up box

type: DSV-6N | ID: SD

technical features

  • Input: 6 strain gauge full bridges
  • Output: 1 strain gauge summing-up signal
  • Sensors: 4- or 6-wires
  • Bridge supply: out of amplifier or internally
  • Supply: 12...30 VDC VDC (optionally)
  • Cascade circuit possible
  • Connection: screwed pin and socket, lockable
  • Cable entries: 7 pcs M16x1,5

Digital temperature transmitter

Digital temperature transmitter

type: DTT | ID: DY

technical features

  • Input: 1x thermocouple type K (standard)
  • Output: 4...20 mA current loop 2-wire
  • Supply: 10...35 VDC
  • Temperature range: -40...+85 °C
  • Material casing: Plastics, PBT, glas-fiber-reinforced
  • Electrical connection: Solid wire, stranded wire with wire end ferrule
  • Protection class: IP00 / IP20
  • Ex certificates: ATEX, IECEx (option)
  • Cert. (on request): EAC (EMC), Uzstandard

Digital temperature transmitter

Digital temperature transmitter

type: DTW | ID: DX

technical features

  • Input RTD Pt100:1x Pt100, 2-, 3-, 4-wire
  • Input RTD Pt1000: 1x Pt1000, 2-, 3-, 4-wire
  • Input Potentiometer: Reed-chains, 3-wire
  • Output: 4 mA...20 mAcurrent loop 2-wire
  • Power supply: 8...35 VDC
  • Temperature range: -40...+85 °C
  • Casing material: Plastic, plastic PBT , glass fibre reinforced
  • Electrical connection: Solid wire, cord with end splice
  • Protection category: I P00 / I P20

Digital video signal switch

Digital video signal switch

Typ: DVU | ID: VU

technical features

  • 4-channel video signal switch
  • Channel selection "Auto" / "Manual" / "Digital"
  • Switch-over time of the four channels in auto-mode adjustable
  • BNC-jacks for inputs and output
  • Supply: 115/230 VAC, 24 VAC/DC, galvanic separation

Channel humidity sensor

Channel humidity sensor

type: FEUCHT | ID: FS

technical features

  • Range humidity: 0...100% relative humudity
  • Range temperature: 0...+40°C/+50°C/+100°C, -10...+90°C, -30...+60°C
  • Operating range humidity: +10...+95% relative humidity
  • Operating range temperature: -30...+80°C
  • Medium: unpressurized,non aggressive, non condensing air
  • Output: 0...20mA or 0...10V (3-/4-wire) / 4...20mA (2-wire)
  • Supply voltage: 15...30VDC or 24VAC
  • Accuracy: +/- 3,5% rH, +/- 0,8°K

Annular load cell

Annular load cell

type: FOWA-1 | ID: FO

technical features

  • Nominal load: 10 kN up to 200 kN
  • Output: strain gauge full bridge, 1 mV/V
  • Voltage supply: 10 VDC
  • Accuracy: +/- 0,5% of range
  • Temperature range: -20...+80 °C
  • Safe overload: 150% of nominal range
  • Material: stainless steel ARMCO 17-4PH
  • Protection: IP66
  • Connection: 3 m cable

Compact level limit value switch

Compact level limit value switch

type: FUELL | ID: FG

technical features

  • For bulk goods with relative dielectric constant >2,5)
  • Range of temperature for medium: 0...+400°C
  • Voltage supply: 21...250 V AC/DC
  • Output: 1 potential free change over contact
  • Process connection: DIN flange DN100
  • Nearly no wear and maintenance free
  • Mounting: all silos and hoppers

TouchM Industrial keyboard

TouchM industrial keyboard

Type: IN-KEY | ID: IK

technical features

  • Applications: industry, workshops, heavy duty, hygienic range
  • Model: desktop, switchboard
  • Material: LG HI-MACS, Samsung Staron
  • Colour: black, white, grey, steel grey, concrete grey
  • Sensitivity: adjustable
  • Feedback: tactile and/or acoustically
  • Connection: USB, PS/2
  • Protection: at least IP65
  • Operation temperature: -10...50 °C

Infrared Vehicle Control System

Infrared Vehicle Control System

type: IVCS | ID: VI

technical features

  • Input device: IR remote control
  • IR range: approx. 5 m
  • Output receiver: max. 100 mA
  • Supply receiver: 24 VDC
  • Sensor connection: 3-pole Super Seal (standard)
  • Charging: via charging station (included)
  • Operating temp.: -20...+60 °C
  • Material sensor: PBT-GF30
  • Material receiver: Aluminum
  • Material remote: Polyamide GFR
  • Material charger: Delrin black / sheet steel

Digital large indicator

Digital large indicator,
digit height 57 / 100 / 200 mm

type: BCD

technical features

  • Display 57 mm: MG-ABR41.B / MG-BBR41.B
  • Display 100 mm: MG-ABR42.B / MG-BBR42.B
  • Display 200 mm: on demand
  • Digits: 4...8
  • Colour: red (Option: green)
  • Operation: front panel keyboard
  • Input: BCD address coded / SPS
  • Mounting: flush fitting or built-on
  • Supply: 100...240 VAC / 18...36 VDC

Digital large indicator

Digital large indicator,
digit height 57 / 100mm

type: LDS

technical features

  • Input: RS485, radio module 868 MHZ
  • Digits: 2, 4, up to 16 digits
  • Digit height: 57 mm, 100 mm
  • LED segments: 16 red (Option: green,amber, blue, white)
  • Supply: 24 VDC
  • Range: -199999...999999 (6 digits)
  • Brightness: dimmable in several steps
  • Unit: display, adhesive foil
  • Enclosure: coating white aluminium
  • Protection: IP65
  • Control: e.g. with ADLM-NS

Digital large indicator

Digital large indicator,
digit height 57 / 100 / 200 mm

type: Profibus DP

technical features

  • Display 57 mm: MG-ABR41.9 / MG-BBR41.9
  • Display 100 mm: MG-ABR42.9 / MG-BBR42.9
  • Display 200 mm: on demand
  • Digits: 4...8
  • Colour: red (Option: green)
  • Operation: front panel keyboard
  • Input: Profibus DP
  • Mounting: flush fitting or built-on
  • Supply: 100...240 VAC / 18...36 VDC

Digital large indicator

Digital large indicator,
digit height 57 / 100 / 200 mm

type: RS232 RS485

technical features

  • Display 57 mm: MG-ABR41.A / MG-BBR41.A
  • Display 100 mm: MG-ABR42.A / MG-BBR42.A
  • Display 200 mm: on demand
  • Digits: 4...8
  • Colour: red (Option: green)
  • Operation: front panel keyboard
  • Input: RS232 / RS485
  • Mounting: flush fitting or built-on
  • Supply: 100...240 VAC / 18...36 VDC

Digital large indicator

Digital large indicator,
digit height 57 / 100 / 200 mm

type: MG-AU | direct current/voltage, Pt100, Pt1000, thermocouple, frequency, rotational speed, counter

technical features

  • red display of von -1999…9999 digits (optional 6 or 8 digits)
  • digit height 57 mm, 100 mm or 200 mm
  • protection class IP65
  • wall mounting housing
  • membrane for pressure equalisation for air ventilation and air vent
  • display adjustment via factory setting or directly on the sensor signal
  • minimum/maximum value recording
  • 9 additional, adjustable supporting points
  • display flashing at threshold value exceedance / undercut
  • tara function
  • brightness sensor
  • programming interlock via access code
  • 2 switching points (closer)
  • optional: fix cable outlet 2m, 5m or 10m
  • optional: connection via external keypad
  • on request: communication via Bluetooth
  • accessories: PC-based configuration kit PM-TOOL with CD and USB-plug

Load measuring pin

Load measuring pin

type: LASTMB | ID: LL

technical features

  • For existing installations without mechanical modification
  • Ranges 0...100kg up to 0...2000t
  • Output full-bridge resistance strain gauge or 0...10V, 0(4)...20mA
  • Degree of protection IP65, optional up to IP68
  • Output is temperature linear
  • Accuracy up to 0,1% of end scale value
  • Every dimension available

Litronic FMS | Reliable Moisture Measuring System
 

Litronic FMS | Reliable Moisture Measuring System

Our comprehensive programme expansion in the product line of moisture measurement technology includes sensor systems for the determination of moisture, water content as well as layer thickness and weight per unit area. Liebherr, as our cooperation partner, has many years of experience in the field of capacitive measurement technology, which is used here. Through this capacitive measurement of moisture and water content, our Litronic FMS sensor system provides the important information to control and regulate our customers' process chains in real time (in situ). In this way, we enable our customers to achieve significant increases in efficiency through optimised use of resources.

 

Feuchtigkeitssensor

Litronic FMS II Evaluation and transfer module

Type: Litronic FMS II Evaluation and transfer module

Features

  • Autonomous evaluation and transfer module for recording and processing values measured by the integrated sensors
  • Measured values can be transferred to a higher-level control system in real time
  • Convenient PC software enables fast and exact calibration of the measuring section
  • Parameterisation and calibration are carried out with a standard PC (Litronic-FMS PC software)
  • Fully automatic operation
  • Manual or automatic operation
  • Channel grouping, coarse/fine switching
  • Adjustable measuring range
  • Fieldbus connection (Profibus DP optional)
  • Modular design for easy expansion
  • Mounting on standard TS35 mounting rail for easy control cabinet installation

Feuchtigkeitssensor

Litronic FMS planar sensor CCS

Type: Planar sensor CCS

Features

  • Pure capacitive measuring method
  • Non-contact measurement possible
  • Temperature compensation
  • Direct digital measured value determination
  • Digital measured value transmission
  • Up to 4 sensors per evaluation module (FMS III) (Up to 16 sensors per evaluation module (FMSII))
  • High-quality stainless steel housing

Feuchtigkeitssensor

Litronic FMS planar sensor P30-S

Type: Planar sensor P30-S

Features

  • Purely capacitive measuring method
  • Sensor exchange without recalibration
  • Sensitivity adjustable in 3 steps
  • Integrated microprocessor with average value calculator
  • Material flow detection
  • Temperature compensation
  • Limit value investigation
  • Direct digital measured value determination
  • Stainless steel housing

Feuchtigkeitssensor

Litronic FMS planar sensor P78

Type: Planar sensor P78

Features

  • Sensor for the determination of moisture in bulk solids and liquids
  • Purely capacitive measuring method
  • Sensor exchange without recalibration
  • Sensitivity adjustable in 3 steps
  • Integrated microprocessor with average value calculator
  • Material flow detection
  • Temperature compensation
  • Limit value investigation
  • Direct digital measured value determination
  • Highly wear-resistant ceramic shield
  • Stainless steel housing

Feuchtigkeitssensor

Litronic-FMS planar sensor P78-E21

Type: Planar sensor P78-E21

Features

  • Sensor for the determination of moisture in bulk solids and liquids
  • Suitable for use in hazardous areas 2D - Zone 21
  • Purely capacitive measuring method
  • Integrated microprocessor with average value calculator
  • Material flow detection
  • Temperature compensation
  • Limit value investigation
  • Direct digital measured value determination
  • Highly wear-resistant ceramic shield
  • Stainless steel housing

Feuchtigkeitssensor

Litronic-FMS planar sensor P78-E22

Type: Planar sensor P78-E22

Features

  • Sensor for determining the moisture in bulk solids and liquids
  • Suitable for use in hazardous areas 3D - Zone 22
  • Purely capacitive measuring method
  • Integrated microprocessor with average value calculator
  • Material flow detection
  • Temperature compensation
  • Limit value investigation
  • Direct digital measured value determination
  • Highly wear-resistant ceramic shield
  • Stainless steel housing

Feuchtigkeitssensor

Litronic-FMS planar sensor P80-CAN

Type: Planar sensor P80-CAN

Features

  • Plug-in sensor for installation in mobile machines. Use without evaluation and transfer module
  • Determination of electrical permittivity depending on material moisture content and material density
  • Reliable material moisture measurement
  • Signal transmission via CAN 2.0B
  • Mean value and median filter
  • Sensor exchange without recalibration
  • Streaming technology
  • Stainless steel housing
  • High precision and robustness

Feuchtigkeitssensor

Litronic-FMS RMH12 pipe sensor

Type: RMH12 pipe sensor

Features

  • Direct digital measuring method
  • Extremely high capacitance resolution due to patented measuring circuit
  • 30 measurements per second with automatic reference calibration
  • High-resolution temperature measurement / compensation of liquid and measuring circuit
  • Ceramic coaxial capacitor
  • High-quality stainless steel housing
  • Resistant to aggressive liquids / oils
  • Simple process connection
  • Digital interface / networking
  • Data streaming technology

DC current/voltage - standard signal - digit height 10mm

Digital indicator DC current/voltage
standard signal, digit height 10 mm

type: M1 | 48 x 24

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 0/4...20 mA, 0...10 V
  • Supply: 24 VDC
  • Other: Linearization, tare, flashing display, software tool special input50 VDC, 100 VDC

Digital indicator Pt1000, digit height 10 mm

type: M1 | 48 x 24

technical features

  • Display: 4 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: RTD Pt1000 (2-wire), -200...850 °C
  • Supply: 24 VDC
  • Other: Flashing display, min/max, software tool

digital indicator resistance hight 10mm

Digital indicator resistance,
hight 10mm

Type: M1 | 48 x 24

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 1 k ohms, 10 k ohms, 100 k ohms, 1 M ohms
  • Supply: 24 VDC
  • Other: Linearization, tare, software tool, flashing display

Digital indicator Shunt digit height 10 mm

type: M1 | 48 x 24

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 0...60 mV, 0...150 mV
  • Supply: 24 VDC
  • Other: Linearization, tare, software tool, flashing display

Digital indicator thermocouple - digit height 10mm

Digital indicator thermocouple,
digit height 10mm

type: M1 | 48 x 24

technical features

  • Display: 4 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: types L, J, K, B, S, N, R, E, T
  • Supply: 24 VDC
  • Other: Flashing display, software tool

DC current/voltage - standard signal - digit height 14mm

Digital indicator DC current/voltage
standard signal, digit height 14 mm

type: M1 | 72 x 36

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 0/4...20 mA, 0...10 VDC
  • Switching output: 2 relays, changeover contact
  • Supply: 24 VDC, 230 VAC
  • Other: Linearization, tare, flashing display, software tool

Digital indicator Pt1000, digit height 14 mm

type: M1 | 72 x 36

technical features

  • Display: 4 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: RTD Pt1000, 2-wire (-200...850 °C)
  • Switching output: 2x relays (Option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Other: Flashing display, min/max, Software tool

Digital indicator resistance - digit height 14mm

Digital indicator resistance,
digit height 14mm

type: M1 | 72 x 36

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 1 k ohms, 10 k ohms, 100 k ohms, 1 M ohms
  • Switching output: 2 relays, 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Supply: 24 VDC, 230 VAC
  • Other: Linearization, flashing display, tare, software tool

Digital indicator Shunt digit height 14 mm

type: M1 | 72 x 36

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 0...60 mV, 0...150 mV
  • Switching output: 2 relays, changeover contact
  • Supply: 24 VDC, 230 VAC
  • Other: Linearization, tare, software tool

Digital indicator thermocouple - digit height 14mm

Digital indicator thermocouple,
digit height 14mm

type: M1 | 72 x 36

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: types L, J, K, B, S, N, R, E, T
  • Switching output: 2 relays, changeover contact
  • Supply: 24 VDC, 230 VAC
  • Other: Flashing display, min/max, Software tool

DC current/voltage - standard signal, digit height 14mm

Digital indicator DC current/voltage
standard signal, digit height 14 mm

type: M1 | 96 x 24

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 0/4...20 mA, 0...10 V
  • Supply: 24 VDC, 230 VAC
  • Other: Linearization, tare, flashing display, software tool special input 50 VDC, 100 VDC

Digital indicator Pt1000, digit height 14 mm

type: M1 | 96 x 24

technical features

  • Display: 4 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: RTD Pt1000 (2-wire), -200...850 °C
  • Supply: 24 VDC, 230 VAC
  • Other: Flashing display, min/max, software tool

Digital indicator resistance - digit height 14mm

Digital indicator resistance,
digit height 14mm

type: M1 | 96 x 24

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 1 k ohms, 10 k ohms, 100 k ohms, 1 M ohms
  • Supply: 24 VDC, 230 VAC
  • Other: Linearization, tare, display flashing, software tool

Digital indicator Shunt digit height 14 mm

type: M1 | 96 x 24

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 0...60 mV, 0...150 mV
  • Supply: 24 VDC, 230 VAC
  • Other: Linearization, tare, software tool

Digital indicator thermocouple - digit height 14mm

Digital indicator thermocouple,
digit height 14mm

type: M1 | 96 x 24

technical features

  • Display: 4 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: types L, J, K, B, S, N, R, E, T
  • Supply: 24 VDC, 230 VAC
  • Other: Flashing display, software tool

DC current/voltage - standard signal, digit height 14mm

Digital indicator DC current/voltage
standard signal, digit height 14 mm

type: M1 | 96 x 48

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 0/4...20 mA, 0...10 V
  • Supply: 24 VDC, 230 VAC
  • Other: Linearization, tare, flashing display, software tool special input 50 VDC, 100 VDC

Digital indicator Pt1000, digit height 14 mm

type: M1 | 96 x 48

technical features

  • Display: 4 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: RTD Pt1000 (2-wire), -200...850 °C
  • Supply: 24 VDC, 230 VAC
  • Other: Flashing display, software tool

Digital indicator resistance - digit height 14mm

Digital indicator resistance,
digit height 14mm

type: M1 | 96 x 48

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 1 k ohms, 10 k ohms, 100 k ohms, 1 M ohms
  • Supply: 24 VDC, 230 VAC
  • Other: Linearization, tare, flashing display, software tool

Digital indicator Shunt digit height 14 mm

type: M1 | 96 x 48

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 0...60 mV, 0...150 mV
  • Supply: 24 VDC, 230 VAC
  • Other: Linearization, tare, flashing display, software tool

Digital indicator thermocouple - digit height 14mm

Digital indicator thermocouple,
digit height 14mm

type: M1 | 96 x 48

technical features

  • Display: 4 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: types L, J, K, B, S, N, R, E, T
  • Supply: 24 VDC, 230 VAC
  • Other: Flashing display, min/max, software tool

Digital indicator - current loop

digit height: 10 mm

type: M1 | 48 x 24

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red
  • Operation: front panel keyboard
  • Input: 4...20 mA
  • Other: Linearization, tare, flashing display, software tool

Digital indicator - universal input

digit height 10 mm

type: M1 | 48 x 24

technical features

  • Display: 5 digits (-9999...99999)
  • Color: red
  • Operation: front panel keyboard
  • Input: universal input
  • Switching output: 2 Semiconductor switching points
  • Supply: 9...28 VDC
  • Other: Linearization, tare, min/max, flashing display

Digital indicator - universal input

digit height 14 mm

type: M1 | 96 x 48

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red (option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: universal input
  • Sensor supply: 24 VDC
  • Supply: 100...240 VDC, 24 VDC
  • Other: Linearization, tare, min/max, flashing display

M1 - Potentiometers - 48 x 24 digit height 10 mm

Digital indicator potentiometers 
digit height 10 mm

type: M1 potentiometers | 48 x 24

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 1 k ohms...1000 k ohms
  • Supply: 24 VDC
  • Other: Linearization, tare, software tool, flashing display

M1 - Potentiometers - 72 x 36 digit height 14 mm

Digital indicator potentiometers 
digit height 14 mm

type: M1 potentiometers | 72 x 36

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 1 k ohms...1000 k ohms
  • Switching output: 2 relays, changeover contact, 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Supply: 24 VDC, 230 VAC
  • Other: Linearization, tare, software tool

M1 - Potentiometers - 72 x 36 digit height 14 mm

Digital indicator potentiometers
digit height 14 mm

type: M1 potentiometers | 96 x 24

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 1 k ohms...1000 k ohms
  • Supply: 24 VDC, 230 VAC
  • Other: Linearization, tare, display flashing, software tool

M1 - Potentiometers - 96 x 48 digit height 14 mm

Digital indicator potentiometers
digit height 14 mm

type: M1 potentiometers | 96 x 48

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 1 k ohms...1000 k ohms
  • Supply: 24 VDC, 230 VAC
  • Other: Linearization, tare, flashing display, software tool

DC current/voltage - standard signal - digit height 14mm

Digital indicator DC current/voltage
standard signal, digit height 14 mm

type: M1 tricolour | 96 x 48

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red green, orange (switchable via limit value)
  • Operation: front panel keyboard, IP65
  • Input: 0/4...20 mA, 0...10 V
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Supply: 24 VDC
  • Other: Linearization, tare, software tool

Digital indicator - current loop

digit height: 14 mm

type: M1-1S | 96 x 48

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red
  • Operation: front panel keyboard
  • Input: 4...20 mA
  • Switching output: 2x Photo-MOS-contact
  • Other: Linearization, tare, flashing display, software tool

Digitalindicator - current loop

digit height: 14 mm

type: M1-3S | 96 x 24

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red
  • Operation: front panel keyboard
  • Input: 4...20 mA
  • Switching output: 2x Photo-MOS-contact
  • Other: Linearization, tare, flashing display, software tool

Digital indicator Pt100 digit height 10 mm

type: M1 | 48 x 24

technical features

  • Display: 4 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: RTD Pt100 (2-, 3-wire), -200...850 °C
  • Supply: 24 VDC
  • Other: Flashing display, software tool

Digital indicator - current loop

digit height: 14 mm

type: M1-6S | 72 x 36

technical features

  • Display: 4 digits (-1999...9999)
  • Color: red
  • Operation: front panel keyboard
  • Input: 4...20 mA
  • Switching output: 2x Photo-MOS-contact
  • Other: Linearization, tare, flashing display, software tool

Digital indicator Pt100 digit height 14 mm

type: M1 | 72 x 36

technical features

  • Display: 4 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: RTD Pt100, 2-, 3-wire (-200...850 °C)
  • Switching output: 2x relays (Option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Supply: 24 VDC, 230 VAC
  • Other: Flashing display, min/max, software tool

Digital indicator Pt100 digit height 14 mm

type: M1 | 96 x 24

technical features

  • Display: 4 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: RTD Pt100 (2-, 3-wire), -200...850 °C
  • Supply: 24 VDC, 230 VAC
  • Other: Flashing display, min/max, software tool

Digital indicator Pt100 digit height 14 mm

type: M1 | 96 x 48

technical features

  • Display: 4 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: RTD Pt100 (2-, 3-wire), -200...850 °C
  • Supply: 24 VDC, 230 VAC
  • Other: Flashing display, software tool

DC current/voltage  - standard signal - digit height 14mm

Digital indicator DC current/voltage
standard signal, digit height 14 mm

type: M2 | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 0/4...20 mA, 0...10 V
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Sensor supply: 10 VDC / 20 mA, 24 VDC / 50 mA
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • Digital input
  • Other: Linearization, tare, min/max, software tool volume metering

Frequency, digit height 14mm

Digital indicator frequency, digit height 14 mm

type: M2 | 96 x 48

technical features

  • Display: 5 digits (0...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 0,01 Hz...999,99 kHz, NAMUR, 3-wire initiator, impulse input, TTL
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Sensor supply: 10 VDC / 20 mA, 24 VDC / 50 mA
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering pulse output, software tool

Digital indicator resistance - digit height 14mm

Digital indicator resistance,
digit height 14mm

type: M2 | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 1 k ohms, 10 k ohms, 100 k ohms
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering, software tool

Digital indicator Shunt digit height 14 mm

type: M2 | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 0...60 mV, 0...150 mV, 0...300 mV, 0...1 V
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering, software tool

Digital indicator thermocouple - digit height 14mm

Digital indicator thermocouple,
digit height 14mm

type: M2 | 96 x 48

technical features

  • Display: 5 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: types L, J, K, B, S, N, R, E, T
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • Other: Digital input, hold, min/max, software tool

AC current/voltage -  digit height 14mm

Digital indicator AC current/voltage
digit height 14mm

type: M2 | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 10 V, 50 V, 1 A, 5 A, true RMS value
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 10...30 VDC, 100...230 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering software tool

Digital indicator profibus, digit height 14 mm

type: M2 | 96 x 48

technical features

  • Display: 6 digits (-199999...999999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: Probus DP
  • Supply: 10...30 VDC galvanically isolated, 115 VAC, 230 VAC
  • Installation depth: 89 mm (with plug-in terminal)
  • Other: Auto baud recognition, software tool

Digital indicator Shunt digit height 14 mm

type: M2 tricolour | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orange switchable
  • Operation: front panel keyboard
  • Input: 0...60 mV, 0...150 mV, 0...300 mV, 0...1 V
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering, software tool

M2 - DMS - mass pressure - digit height 14 mm

Digital indicator strain gauge / mass pressure  digit height 14 mm

type: M2 strain gauge / mass pressure | 96 x 48

technical feature

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: strain gauge / mass pressure 1...4 mV/V
  • Switching contact: 2 Relays (Option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Sensor supply: 10 VDC / 20...40 mA
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • Digital input
  • Other: Linearization, min/max, zero key, sensor alignment software tool

M2 - DMS - weighing technique - digit height 14 mm

Digital indicator straingauge / weighing technique
digit height 14 mm

type: M2 straingauge / weighing technique | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: strain gauge / weighing technique 1...4 mV/V
  • Switching contact: 2 Relays (Option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Sensor supply: 10 VDC / 20...40 mA
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • Digital input
  • Other: Zero key, linearization, min/max, software tool

M2 - Potentiometers - 96 x 48 digit height 14 mm

Digital indicator potentiometers
digit height 14 mm

type: M2 potentiometers | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard IP65
  • Input: 1 k ohms...1000 k ohms
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 10...30 VDC galvanically insulated, 230 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering, software tool

M2 - tricolour DMS - mass pressure - digit height 14 mm

Digital indicator strain gauge / mass pressure
digit height 14 mm

type: M2 tricolour strain gauge / mass pressure | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orange switchable
  • Operation: front panel keyboard
  • Input: strain gauge / mass pressure 1...4 mV/V
  • Switching contact: 2 Relays (Option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Sensor supply: 10 VDC / 20...40 mA
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • incl. digital input
  • Other: Linearization, min/max, zero key, sensor alignment software tool

M2 - tricolour DMS - weighing technique - digit height 14 mm

Digital indicator straingauge 

digit height 14 mm

type: M2 tricolour straingauge / weighing technique | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orange switchable
  • Operation: front panel keyboard, IP65
  • Input: strain gauge / weighing technique 1...4 mV/V
  • Switching contact: 2 Relays (Option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Sensor supply: 10 VDC / 20...40 mA
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • Digital input
  • Other: Zero key, linearization, min/max, software tool

DC current/voltage - standard signal - digit height 14mm

Digital indicator DC current/voltage
standard signal, digit height 14 mm

type: M2 tricolour | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orange switchable
  • Operation: front panel keyboard, IP65
  • Input: 0/4...20 mA, 0...10 V
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Sensor supply: 10 VDC / 20 mA, 24 VDC / 50 mA
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • Digital input
  • Other: Linearization, tare, min/max, software tool volume metering

AC current/voltage - digit height 14mm

Digital indicator AC current/voltage
digit height 14mm

type: M2 3-Colour | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orange switchable
  • Operation: front panel keyboard
  • Input: 10 V, 50 V, 1 A, 5 A, true RMS value
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • Digital input: option
  • Other: Linearization, tare, min/max, volume metering, software tool

Frequency, digit height 14mm

Digital indicator frequency, digit height 14 mm

type: M2 tricolour | 96 x 48

technical features

  • Display: 5 digits (0...99999)
  • Color: red, green, orange switchable
  • Operation: front panel keyboard
  • Input: 0,01 Hz...999,99 kHz, NAMUR, 3-wire initiator, impulse input, TTL
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Sensor supply: 10 VDC / 20 mA, 24 VDC / 50 mA
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering pulse output, software tool

Digital indicator resistance - digit height 14mm

Digital indicator resistance,
digit height 14mm

type: M2 tricolour | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orange changeable
  • Operation: front panel keyboard, IP65
  • Input: 1 k ohms, 10 k ohms, 100 k ohms
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering, software tool

Digital indicator thermocouple - digit height 14mm

Digital indicator thermocouple,
digit height 14mm

type: M2 tricolour | 96 x 48

technical features

  • Display: 5 digits
  • Color: red, green, orange switchable
  • Operation: front panel keyboard, IP65
  • Input: types L, J, K, B, S, N, R, E, T
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • Other: Digital input, hold, min/max, software tool

M2 - tricolour - Potentiometers - 96 x 48 digit height 14 mm

Digital indicator tricolour potentiometers
digit height 14 mm

type: M2 tricolour | potentiometers | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orage switchable
  • Operation: front panel keyboard IP65
  • Input: 1 k ohms...1000 k ohms
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 10...30 VDC galvanically insulated, 230 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering, software tool

Digital indicator set-point adjuster,

digit height 14 mm

type: M2-1G | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 2x digital inputs
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 10...30 VDC, 230 VAC
  • Sensor supply: 15 VDC / 10 mA
  • Other: Flashing display, software tool

Digital indicator Pt100 2-Wire digit height 14 mm

type: M2 | 96 x 48

technical features

  • Display: 5 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: RTD Pt100 (2-wire), -200...850 °C
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • Installation depth: 89 mm (with plug-in terminal)
  • Other: Digital input, hold, min/max, software tool

Digital indicator Pt100 3-/4-Wire,

digit height 14 mm

type: M2 | 96 x 48

technical features

  • Display: 5 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: RTD Pt100 (3-, 4-wire), -200...850 °C
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • Other: Digital input, hold, min/max, software tool

DC current/high DC voltage - standard signal - digit height 14mm

Digital indicator DC current/high DC voltage - standard signal, digit height 14 mm

type: M2-H | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 0...1 ADC, 0...50 VDC, 0...300 VDC, 0...600 VDC
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 230 VAC
  • Digital input
  • Other: Linearization, tare, min/max, software tool volume metering

AC current/high AC voltage - digit height 14mm

Digital indicator AC current/high AC voltage
digit height 14mm

type: M2-H | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 300 V, 600 V, 1 A, 5 A, true RMS value
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 230 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering, software tool

DC current/high DC voltage - standard signal - digit height 14mm

Digital indicator DC current/high DC voltage - standard signal, digit height 14 mm

type: M2-H tricolour | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orange switchable
  • Operation: front panel keyboard, IP65
  • Input: 0...1 ADC, 0...50 VDC, 0...300 VDC, 0...600 VDC
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 230 VAC
  • Digital input
  • Other: Linearization, tare, min/max, software tool volume metering

AC current/voltage - digit height 14mm

Digital indicator AC current/voltage
digit height 14mm

type: M2-H 3-Colour | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orange switchable
  • Operation: front panel keyboard
  • Input: 300 V, 600 V, 1 A, 5 A, true RMS value
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 230 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering software tool

Digital indicator Pt100 2-Wire digit height 14 mm

type: M2 tricolour | 96 x 48

technical features

  • Display: 5 digits
  • Color: red, green, orange switchable
  • Operation: front panel keyboard, IP65
  • Input: RTD Pt100 (2-wire), -200...850 °C
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • Installation depth: 89 mm (with plug-in terminal)
  • Other: Digital input, hold, min/max, software tool

Digital indicator Pt100  3-/4-Wire,

digit height 14 mm

type: M2 tricolour | 96 x 48

technical features

  • Display: 5 digits
  • Color: red, green, orange switchable
  • Operation: front panel keyboard, IP65
  • Input: RTD Pt100 (3-, 4-wire), -200...850 °C
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Supply: 10...30 VDC galvanically isolated, 230 VAC
  • Other: Digital input, hold, min/max, software tool

DC current/voltage - standard signal - digit height 10mm

Digital indicator DC current/voltage
standard signal, digit height 10 mm

type: M3 | 48 x 24

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 0/4...20 mA, 0...10 V
  • Analog output: 0/4...20 mA, 0...10 V (16 bit switchable)
  • Switching output: 2 PhotoMos (option)30 VDC/AC, 0,4 A
  • Sensor supply: 10 VDC / 20 mA, 24 VDC / 50 mA (incl. digital input)
  • Supply: 24 VDC, 100...240 VAC
  • Digital input
  • Other: Linearization, tare, min/max, software tool volume metering

Frequency, digit height 10mm

Digital indicator frequency, digit height 10 mm

type: M3 | 48 x 24

technical features

  • Display: 5 digits (0...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: Frequency 0,01...999,99 Hz, 3-wire initiator, impulse input, TTL
  • Analog output: 0/4...20 mA, 0...10 V (16 bit switchable)
  • Switching output: 2 PhotoMos (option) Contacts: 250 VAC / 2 AAC, 30 VDC / 2 ADC
  • Sensor supply: 10 VDC / 20 mA, 24 VDC / 50 mA (incl. digital input) 24 VDC 50 mA with digital and impulse input (only at 10 kHz)
  • Supply: 24 VDC, 100...240 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering pulse output, software tool

Digital indicator Pt100 digit height 10 mm

type: M3 | 48 x 24

technical features

  • Display: 5 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: RTD Pt100 (3-, 2-, 4-wire), -200...850 °C
  • Analog output: 0/4...20 mA, 0...10 V (16 bit switchable)
  • Switching output: 2 PhotoMos (option)30 VDC/AC, 0,4 A
  • Supply: 24 VDC, 100...240 VAC
  • Other: Hold, min/max, software tool

Digital indicator Pt1000, hight 10 mm

type: M3 | 48 x 24

technical features

  • Display: 5 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: RTD Pt1000 (2-wire), -200...850 °C
  • Analog output: 0/4...20 mA, 0...10 V (16 bit switchable)
  • Switching output: 2 PhotoMos (option)30 VDC/AC, 0,4 A
  • Supply: 24 VDC, 100...240 VAC
  • Other: Hold, min/max, software tool

Digital indicator - resistance - digit height10mm

Digital indicator resistance,
digit height 10mm

type: M3 | 48 x 24

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 1 k ohms, 10 k ohms
  • Analog output: 0/4...20 mA, 0...10 V (16 bit switchable)
  • Switching output: 2 PhotoMos (option)30 VDC/AC, 0,4 A
  • Supply: 24 VDC, 100...240 VAC
  • Digital input
  • Other: Linrarization, tare, min/max, software tool

Digital indicator Shunt digit height 10 mm

type: M3 | 48 x 24

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 0...60 mV, 0...150 mV, 0...300 mV, 0...1 V
  • Analog output: 0/4...20 mA, 0...10 V (16 bit switchable)
  • Switching output: 2 PhotoMos (option)30 VDC/AC, 0,4 A
  • Supply: 24 VDC, 100...240 VAC
  • Digital input
  • Other: Linearization, tare, software tool, min/max, volume metering

Digital indicator thermocouple - digit height 10mm

Digital indicator thermocouple,
digit height 10mm

type: M3 | 48 x 24

technical features

  • Display: 5 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: types L, J, K, B, S, N, R, E, T
  • Analog output: 0/4...20 mA, 0...10 V (16 bit switchable)
  • Switching output: 2 PhotoMos (option)30 VDC/AC, 0,4 A
  • Supply: 24 VDC, 100...240 VAC
  • Other: Hold, min/max, software tool

AC current/voltage - digit height 14mm

Digital indicator AC current/voltage
digit height 14mm

type: M3 | 96 x 24

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 10 V, 50 V, 1 A, 5 A, true RMS value
  • Analog output: 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232, RS485
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Other: Linearization, tare, min/max, volume metering, software tool

DC current/voltage - standard signal - digit height 14mm

Digital indicator DC current/voltage
standard signal, digit height 14 mm

type: M3 | 96 x 24

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 0/4...20 mA, 0...10 V
  • Analog output: 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232, RS485 (digital input possible)
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Sensor supply: 10 VDC / 50 mA, 24 VDC / 50 mA (incl. digital input)
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Other: Linearization, tare, min/max, software tool volume metering

Frequency, digit height 14mm

Digital indicator frequency, digit height 14mm

type: M3 | 96 x 24

technical features

  • Display: 5 digits (0...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: Frequency 0,01...999,99 Hz
  • Analog output: 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232, RS485
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Sensor supply: 24 VDC / 50 mA, 10 VDC / 20 mA
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering pulse output, software tool

Digital indicator Pt100 digit height 14 mm

type: M3 | 96 x 24

technical features

  • Display: 5 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: RTD Pt100 (3-, 4-wire), -200...850 °C
  • Analog output: 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232, RS485
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Other: Hold, min/max, software tool

Digital indicator resistance - hight 14mm

Digital indicator resistance,
hight 14mm

type: M3 | 96 x 24

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 1 k ohms, 10 k ohms, 100 k ohms
  • Analog output: 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232, RS485
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Other: Linearization, tare, min/max, volume metering, software tool

Digital indicator Shunt digit height 14 mm

type: M3 | 96 x 24

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 0...60 mV, 0...150 mV, 0...300 mV, 0...1 V
  • Analog output: 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232 / RS485
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VDC
  • Other: Linearization, tare, min/max, volume metering, software tool

Digital indicator thermocouple - digit height 14mm

Digital indicator thermocouple,
digit height 14mm

type: M3 | 96 x 24

technical features

  • Display: 5 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: types L, J, K, B, S, N, R, E, T
  • Analog output: 1x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232, RS485
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Other: Flashing display, hold, min/max, software tool

AC current/voltage - digit height 14mm

Digital indicator AC current/voltage
digit height 14mm

type: M3 | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 10 V, 50 V, 1 A, 5 A, true RMS value
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 2x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232 / RS485 (Option)
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering, software tool

DC current/voltage - standard signal - digit height 14mm

Digital indicator DC current/voltage
standard signal, digit height 14mm

type: M3 | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 0/4...20 mA, 0...10 V
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 1x, 2x 0/4...20 mA, 0...10 V incl. digital input
  • Interface: RS232 / RS485 (option)
  • Sensor supply: 10 VDC / 50 mA, 24 VDC / 50 mA
  • Supply: 10...40 VDC galvanically isolated, 18...30 VAC, 230 VAC
  • Digital input
  • Other: Linearization, tare, min/max, software tool volume metering

Frequency, digit height 14mm

Digital indicator frequency, digit height 14 mm

type: M3 | 96 x 48

technical features

  • Display: 5 digits (0...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 0,01 Hz...999,99 kHz Connection for NAMUR-, NPN-, PNP- and TTL-sensors
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 1x, 2x 0/4...20 mA, 0...10 V incl. digital input
  • Interface: RS232 / RS485 (Option)
  • Sensor supply: 10 VDC / 20 mA, 24 VDC / 50 mA (incl. digital input) alternatively: 24 VDC 50 mA incl. digital and impulse input (for 10 kHz)
  • Supply: 10...40 VDC, 18-30 VAC, 230 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering pulse output, software tool

Digital indicator resistance - digit height 14mm

Digital indicator resistance,
digit height 14mm

type: M3 | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 1 k ohms, 10 k ohms, 100 k ohms
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 2x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232 / RS485 (Option)
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering, software tool

Digital indicator Shunt digit height 14 mm

type: M3 | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 0...60 mV, 0...150 mV, 0...300 mV, 0...1 V
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 2x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232 / RS485 (option)
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering, software tool

Digital indicator thermocouple - digit heightt 14mm

Digital indicator thermocouple,
digit height 14mm

type: M3 | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: types L, J, K, B, S, N, R, E, T
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 2x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232 / RS485 (Option)
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Other: Flashing display, hold, min/max, software tool

Digital indicator profibus, digit height 10 mm

type: M3 | 48 x 24

technical features

  • Display: 5 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: Profibus DP
  • Installation depth: 90 mm (with plug-in terminal)
  • Other: Auto baud recognition, software tool

Digital indicator Shunt digit height 14 mm

type: M3 tricolour | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orange switchable
  • Operation: front panel keyboard, IP65
  • Input: 0...60 mV, 0...150 mV, 0...300 mV, 0...1 V
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232 / RS485 (option)
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering, software tool

M3 - DMS - mass pressure - digit height 14 mm

Digital indicator strain gauge / mass pressure
digit height 14 mm

type: M3 strain gauge / mass pressure | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: strain gauge / mass pressure 1...4 mV/V
  • Switching contact: 2 or 4 relays (Option) Contact: 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 1x / 2x: 0/4...20 mA, 0...10 V
  • Interface: RS232, RS422 (galvanically insulated)
  • Sensor supply: 10 VDC / 20...40 mA
  • Supply: 10...40 VDC, 100...240 VAC, 18...30 VAC
  • Digital input
  • Other: Linearization, min/max, tare, software tool

M3 DMS - weighing technique - digit height 14 mm

Digital indicator straingauge / weighing technique
digit height 14 mm

type: M3 straingauge / weighing technique | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: strain gauge / weighing technique 1...4 mV/V
  • Switching contact: 2 or 4 relays (Option) Contact: 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 1x / 2x: 0/4...20 mA, 0...10 V
  • Interface: RS232, RS422 (galvanically insulated)
  • Sensor supply: 10 VDC / 20...40 mA
  • Digital input
  • Other: Linearization, min/max, tare, software tool

M1 - Potentiometer - 48 x 24 hight 10 mm

Digital indicator potentiometers
digit height 10 mm

type: M3 potentiometers | 48 x 24

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 1 k ohms...1000 k ohms
  • Analog output: 0/4...20 mA, 0...10 V (16 bit switchable)
  • Switching output: 2 PhotoMos (option)30 VDC/AC, 0,4 A
  • Supply: 24 VDC, 100...240 VAC
  • Digital input
  • Other: Linearization, tare, min/max, software tool

M3 - Potentiometers - 96 x 24 digit height 14 mm

Digital indicator potentiometers
digit height 14 mm

type: M3 potentiometers | 96 x 24

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 1 k ohms...1000 k ohms
  • Analog output: 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232, RS485
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC /5 ADC
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Other: Linearization, tare, min/max, volume metering, software tool

M3 - Potentiometers - 96 x 48 digit height 14 mm

Digitalindicator potentiometers 
digit height 14 mm

type: M3 potentiometers | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 1 k ohms...1000 k ohms
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 1x, 2x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232 / RS485 (Option)
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering, software tool

AC current/voltage - digit height 14mm

Digital indicator AC current/voltage
digit height 14mm

type: M3 tricolour | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orange switchable
  • Operation: front panel keyboard
  • Input: 10 V, 50 V, 1 A, 5 A, true RMS value
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 2x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232 / RS485 (Option)
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering, software tool

DC current/voltage - standard signal - digit height 14mm

Digital indicator DC current/voltage
standard signal, digit height 14 mm

type: M3 tricolour | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orange changeable)
  • Operation: front panel keyboard, IP65
  • Input: 0/4...20 mA, 0...10 V
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 2 ADC Option: 8 PhotoMos outputs
  • Analog output: 1x, 2x 0/4...20 mA, 0...10 V incl. digital input
  • Interface: RS232 / RS485 (option)
  • Sensor supply: 10 VDC / 20 mA, 24 VDC / 50 mA
  • Other: Linearization, tare, min/max, software tool volume metering

Frequency, digit height 14mm

Digital indicator frequency, digit height 14 mm

type: M3 tricolour | 96 x 48

technical features

  • Display: 5 digits (0...99999)
  • Color: red, green, orange switchable
  • Operation: front panel keyboard
  • Input: 0,01 Hz...999,99 kHz Connection for NAMUR-, NPN-, PNP- and TTL-sensors
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 1x, 2x 0/4...20 mA, 0...10 V incl. digital input
  • Interface: RS232 / RS485 (Option)
  • Sensor supply: 10 VDC / 20 mA, 24 VDC / 50 mA (incl. digital input) alternatively: 24 VDC 50 mA incl. digital and impulse input (for 10 kHz)
  • Supply: 10...40 VDC, 18-30 VAC, 230 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering pulse output, software tool

Digital indicator resistance - digit height 14mm

Digital indicator resistance,
digit height 14mm

type: M3 tricolour | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orange changeable
  • Operation: front panel keyboard
  • Input: 1 k ohms, 10 k ohms, 100 k ohms
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 2x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232 / RS485 (Option)
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering, software tool

Digital indicator thermocouple - digit height 14mm

Digital indicator thermocouple,
digit height 14mm

type: M3 tricolour | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orange switchable
  • Operation: front panel keyboard
  • Input: types L, J, K, B, S, N, R, E, T
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 0/4...20 mA, 0...10 V
  • Interface: RS232 / RS485 (Option)
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Other: Flashing display, hold, min/max, software tool

M3 - tricolour - DMS - mass pressure - digit height 14 mm

Digital indicator strain gauge / mass pressure
digit height 14 mm

type: M3 tricolour strain gauge / mass pressure | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orange switchable
  • Operation: front panel keyboard
  • Input: strain gauge / mass pressure 1...4 mV/V
  • Switching contact: 2 or 4 relays (Option) Contact: 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 1x / 2x: 0/4...20 mA, 0...10 V
  • Interface: RS232, RS422 (galvanically insulated)
  • Sensor supply: 10 VDC / 20...40 mA
  • Supply: 10...40 VDC, 100...240 VAC, 18...30 VAC
  • Digital input
  • Other: Linearization, min/max, tare, software tool

M3 - tricolour - DMS - weighing technique - digit height 14 mm

Digital indicator straingauge / weighing technique

digit height 14 mm

type: M3 tricolour straingauge weighing technique | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orange switchable
  • Operation: front panel keyboard
  • Input: strain gauge / weighing technique 1...4 mV/V
  • Switching contact: 2 or 4 relays (Option) Contact: 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 1x / 2x: 0/4...20 mA, 0...10 V
  • Interface: RS232, RS422 (galvanically insulated)
  • Sensor supply: 10 VDC / 20...40 mA
  • Digital input
  • Other: Linearization, min/max, tare, software tool

M3 - tricolour - Potentiometers - 96 x 48 digit height 14 mm

Digital indicator tricolour potentiometers
digit height 14 mm

type: M3 tricolour | potentiometers | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orange switchable
  • Operation: front panel keyboard
  • Input: 1 k ohms...1000 k ohms
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 1x, 2x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232 / RS485 (Option)
  • Digital input
  • Other: Linearization, tare, min/max, volume metering, software tool

Digital indicator set-point adjuster,

digit height 10 mm

type: M3-7G | 48 x 24

technical features

  • red display of -19999…99999 digits (optional green, orange, or blue display)
  • minimal installation depth: 90 mm without plug-in terminal
  • definable setting for the setpoint
  • configurable output area between 0…10 V or 0…20 mA
  • adjustable increment per press
  • display flashing at threshold exceedance / undercut
  • digital inputs for key switch or external adjustment buttons
  • configurable as a code for the setpoint adjustment protection
  • different operation variants for the control setpoint
  • optional startup behaviour with last setting or default value
  • optional speed settings for adjusting the setpoint
  • quick response when changing the default value (ramp function)
  • programming interlock via access code
  • protection class IP65 at the front
  • plug-in terminal
  • accessories: pc-based configuration-kit PM-TOOL with CD & USB adapter
  • on demand: devices for working temperatures of -25°C…60°C or -40°C…80°C

Digital indicator Pt100 3-/4-Wire,

digit height 14 mm

type: M3 | 96 x 48

technical features

  • Display: 5 digits
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: RTD Pt100, 3-, 4-wire (-200...850 °C)
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs, 30 VAC/DC, 0,4 A
  • Analog output: 2x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232 / RS485 (option)
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Other: Hold, min/max, software tool

AC current/voltage - digit height 14mm

Digital indicator AC current/high AC voltage
digit height 14mm

type: M3-H | 96 x 24

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 600 VAC, 5 AAC, true RMS value
  • Analog output: 0/4...20 mA, 0...10 V (16 bit switchable)
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Supply: 100...240 VAC
  • Other: Linearization, tare, min/max, volume metering, software tool

DC current/high DC voltage - digit height 14mm

Digital indicator DC current/high DC voltage
digit height 14 mm

type: M3-H | 96 x 24

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 0...1 A, 0...600 V
  • Analog output: 0/4...20 mA, 0...10 V (16 bit switchable)
  • Switching output: 2 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Supply: 100...240 VAC
  • Other: Linearization, tare, min/max, software tool volume metering

AC current/voltage - digit height 14mm

Digital indicator AC current/high AC voltage
digit height 14mm

type: M3-H | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard
  • Input: 300 V, 600 V, 1 A, 5 A, true RMS value
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 2x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232 / RS485 (Option)
  • Supply: 100...240 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering, software tool

DC current/high DC voltage - standard signal - digit height 14mm

Digital indicators DC current/high DC voltage - standard signal, digit height 14 mm

type: M3-H | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red (Option: green, orange, blue)
  • Operation: front panel keyboard, IP65
  • Input: 0...1 ADC, 0...50 VDC, 0...300 VDC, 0...600 VDC
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 1x, 2x 0/4...20 mA, 0...10 V incl. digital input
  • Interface: RS232 / RS485 (option)
  • Supply: 100...240 VAC
  • Digital input
  • Other: Linearization, tare, min/max, software tool volume metering

AC current/voltage - digit height 14mm

Digital indicator AC current/high AC voltage
digit height 14mm

type: M3-H tricolour | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orange switchable
  • Operation: front panel keyboard
  • Input: 300 V, 600 V, 1 A, 5 A, true RMS value
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 2x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232 / RS485 (Option)
  • Supply: 100...240 VAC
  • Digital input
  • Other: Linearization, tare, min/max, volume metering, software tool

DC current/high DC voltage - standard signal - digit height 14mm

Digital indicator DC current/high DC voltage - standard signal, digit height 14 mm

type: M3-H tricolour | 96 x 48

technical features

  • Display: 5 digits (-19999...99999)
  • Color: red, green, orange switchable
  • Operation: front panel keyboard, IP65
  • Input: 0...1 ADC, 0...50 VDC, 0...300 VDC, 0...600 VDC
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs
  • Analog output: 1x, 2x 0/4...20 mA, 0...10 V incl. digital input
  • Interface: RS232 / RS485 (option)
  • Versorgung: 100...240 VAC
  • Digital input
  • Other: Linearization, tare, min/max, software tool volume metering

Digital indicator Pt100  3-/4-Wire,

digit height 14 mm

type: M3 tricolour | 96 x 48

technical features

  • Display: 5 digits
  • Color: red, green, orange switchable
  • Operation: front panel keyboard
  • Input: RTD Pt100, 3-, 4-wire (-200...850 °C)
  • Switching output: 2 / 4 relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC Option: 8 PhotoMos outputs, 30 VAC/DC, 0,4 A
  • Analog output: 2x 0/4...20 mA, 0...10 V (16 bit switchable)
  • Interface: RS232 / RS485 (option)
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Other: Hold, min/max, software tool

Controller multi-setpoint 32 x 74 mm

Controller multi-setpoint 32 x 74 mm

Type: MATR142 | ID: DC

technical features

  • Version: 2, 3-point or continuous controller
  • Input: Pt100, Pt1000, thermocouples, voltage / current, DI
  • Measuring range: programmable
  • Control mode: PID with auto-tuning
  • Output: Relay, bistable output, RS485
  • Alarm output: Relay contact, programmable alarm function
  • Supply: 24 bis 230 VAC/VDC
  • Material: Polycarbonate UL94V1, self-extinguishing
  • Protection: IP65 front panel (with gasket), IP30 box, IP20 terminals

Controller multi-setpoint 48 x 48 mm

Controller multi-setpoint 48 x 48 mm

Type: MATR243 | ID: DC

technical features

  • Version: 2, 3-point or continuous controller
  • Input: Pt100, Pt1000, thermocouples, voltage / current, DI
  • Measuring range: programmable
  • Control mode: PID with auto-tuning
  • Output: Relay, bistable output, 4…20 mA, 0…10 V, RS485
  • Alarm output: Relay contact, programmable alarm function
  • Supply: 24 bis 230 VAC/VDC
  • Material: Polycarbonate UL94V1, self-extinguishing
  • Protection: IP65 front panel (with gasket), IP20 box and terminals

Controller multi-setpoint / dual input 96 x 48 mm

Controller multi-setpoint / dual input 96 x 48 mm

Type: MATR401 | ID: DC

technical features

  • Version: 2, 3-point or continuous controller
  • Input: Pt100, Pt1000, thermocouples, voltage / current, DI
  • Measuring range: programmable
  • Control mode: PID with auto-tuning
  • Output: Relay, bistable output, 4…20 mA, 0…10 V, RS485
  • Alarm output: Relay contact, programmable alarm function
  • Supply: 24 bis 230 VAC/VDC
  • Material: Polycarbonate UL94V1, self-extinguishing
  • Protection: IP65 front panel (with gasket), IP20 box and terminals

Analog Transmitter Universal OEM

Analog Transmitter Universal OEM

Type: MATU | ID: GD

Technical Features

  • Input: variable (programmable)
  • Output: 4…20 mA (2-wire / 3-wire)
  • Voltage output: 3-wire-only, multiple options
  • Digital I/Os: 3x
  • Measurement ranges: adjustable (programmable)
  • Resolution: 24 bit
  • Accuracy: max. 0,1% of nominal range
  • Operating temperature: -40…+85 °C
  • Connection: soldering pads
  • Dimensions: 35x18x4 mm / 31,4x28,6x4,8 mm
  • Supply: 9…35 VDC / 12…35 VDC (volt output)

BARGRAPH 30 segments

Digital indicator bargraph 30 segments

type: MB1 | 96 x 24

technical features

  • Display: 30 segments
  • Range of indication: scale 0...100%
  • Colour: red (Option: green, orange, blue)
  • Operation: keyboard rear side
  • Input: 0(4)...20 mA, 0...10 V
  • Supply: 24 VDC galv. isolated

BARGRAPH 10 segments

Digital indicator bargraph 10 segments

type: MB1 | 48 x 24

technical features

  • 10 point bargraph display – NEW: colour: red or green, selectable via decode switch
  • minimum installation depth: 30 mm without plug-in screw terminal
  • adjustable via HEX switch and push-button
  • pre-adjusted input for standard signals 0-10 V and 0/4-20 mA
  • free adjustment on the input signal
  • 8 different display types adjustable as bar, dot/point or curtain
  • free choice of direction and display of centre (e.g. bars starting from the middle of display)
  • control of bightness level in stages
  • protection class IP65
  • plug-in terminal
  • optional: switchable colours green/orange, blue/red

BARGRAPH 20 segments

Digital indicator bargraph 20 segments

type: MB1 | 72 x 24

technical features

  • 20 point bargraph display – NEW: colour: red or green, selectable via decode switch
  • minimum installation depth: 32 mm without plug-in screw terminal
  • adjustable via HEX switch and push-button
  • pre-adjusted input for standard signals 0-10 V and 0/4-20 mA
  • free adjustment on the input signal
  • 8 different display types adjustable as bar, dot/point or curtain
  • free choice of direction and display of centre (e.g. bars starting from the middle of display)
  • control of bightness level in stages
  • protection class IP65
  • plug-in terminal
  • optional: switchable colours green/orange, blue/red

BARGRAPH 55 segments

Digital indicator bargraph 55 segments

type: MB2 | 96 x 96

technical features

  • Indication: 55 segments, 5 digit, 7-segments display (14 mm)
  • Range of indication: skale -19999...99999
  • Colour: red
  • Operation: front panel keyboard IP65
  • Interface: RS232 / RS485
  • Input: 0(4)...20 mA, 0...10 V
  • Output: 0(4)...20 mA, 0...10 V (16 bit switchable)
  • Switching output: 2x relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Sensor supply: 10 VDC / 20 mA, 24 VDC / 50 mA
  • Digital input
  • Other: min/max, volume metering, flashing display

BARGRAPH 55 segments

Digital indicator bargraph 55 segments

type: MB2-F | 96 x 96

technical features

Indication: 55 segments, 5 digit, 7-segments display (14 mm)
Range of indication: skale -19999...99999
Colour: red
Operation: front panel keyboard IP65
Interface: RS232 / RS485
Input: 0,01 Hz...999,99 kHz
Option: 3-wire PNP/NPN, Namur, incremental encoder, TTL signals
Output: 0(4)...20 mA, 0...10 V (16 bit switchable)
Switching output: 2x relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
Sensor supply: 12 VDC / 50 mA, 24 VDC / 50 mA
Digital input
Other: min/max, volume metering, flashing display

BARGRAPH 30 segments

Digital indicator bargraph 30 segments

type: MB3 | 96 x 24

technical features

  • Indication: 30 segments (3-colour), 3 digit, 7-segments display (8 mm)
  • Range of indication: skale -199...999
  • Colour: red, Option: green
  • Operation: front panel keyboard IP65
  • Interface: RS232 / RS485
  • Input: 0(4)...20 mA, 0...10 V
  • Output: 0(4)...20 mA, 0...10 V (16 bit switchable)
  • Switching output: 2x relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
  • Sensor supply: 10 VDC / 20 mA, 24 VDC / 50 mA
  • Digital input
  • Other: min/max, volume metering

BARGRAPH 30 segments

Digital indicator bargraph 30 segments

type: MB3-H | 96 x 24

technical features

  • Indication: 30 segments (3-colour), 3 digit, 7-segments display (8 mm)
  • Range of indication: skale -199...999
  • Colour: red, Option: green
  • Operation: front panel keyboard IP65
  • Input: 0...1 VAC, 0...300 VDC
  • Output: 0(4)...20 mA, 0...10 V (16 bit switchable)
  • Switching output: 2x relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Supply: 100...240 VAC
  • Other: min/max, volume metering

Transmitter Temperature IO-Link

type: MCTT-E | ID: QA

technical features

  • Input Pt100: 3-wire / -200...800 °C
  • Input Type J: -210...1200 °C
  • Input Type K: -200...1372 °C
  • Input Type N: -200...1300 °C
  • Accuracy: max. 0,05% of nominal range
  • Operating temperature: -20...+80 °C
  • Configuration: IO-Link interface
  • Connection: Soldering pads
  • Protection class: IP00
  • Dimensions: 40 x 17 mm
  • Casing: none

OEM Transmitter 1-channel IO-Link

OEM Transmitter 1-channel IO-Link

Type: MCUT-E | ID: NK

Technical features

  • Input: Strain gauge full bridge
  • Filter setting: 0,5 s
  • Output: IO-Link interface
  • Resolution: 16 bit
  • Accuracy: max. 0,05% of nominal range
  • Operating temperature: -20...+85 °C
  • Connection: Soldering pads
  • Protection class: IP00
  • Material: FR4, PBT
  • Dimensions: 40x17x8,25 mm
  • Supply: 24 VDC

OEM Transmitter 1-channel IO-Link

OEM Transmitter 1-channel IO-Link

Type: MCUT-R | ID: QW

Technical features

  • Input: Strain gauge full bridge
  • Filter setting: 0,5 s
  • Output: IO-Link interface
  • Resolution: 16 bit
  • Accuracy: max. 0,05% of nominal range
  • Operating temperature: -20...+85 °C
  • Connection: Soldering pads
  • Protection class: IP00
  • Material: FR4, PBT
  • Dimensions: 31,4x28,6x4,8 mm / Ø8 mm (hole)
  • Supply: 24 VDC

Modular intelligent weather station

Modular intelligent weather station

type: MD-IWS | ID: MW

technical features

  • Reliable detection of all aqueous precipitation
  • 1 switching contact "heating on"
  • Serial interface, galvanically insulated
  • 1 input rail temperature (4...20 mA)
  • Quadruple analogue output optionally for air temperature, relative air, humidity, intensity of precipitation and air pressure
  • Intelligent self adjustment in case of soiling
  • Internal heating effective down to -30°C
  • Optional mounting device, galvanized
  • Optional display in cover of case

ME - Gas Cylinder Scale

ME - Gas Cylinder Scale *'*

Typ: ME-GFW1 | ID: CZ

technical features

  • Range ME-GFW1: 250 kg
  • Output: 4...20 mA current loop
  • Limit value contacts: 2x electronically PNP
  • Supply: 12...40 VDC (out of current loop)
  • Electrical connection: 2x M12x1, 5-pole
  • Temperature range: -20...+55 °C
  • Overload protecrion: adjustable via 3 locking rings
  • Protection: IP65
  • Configuration: Keys / Software

ME - Gas Cylinder Scale

ME - Gas Cylinder Scale *'*

Typ: ME-GFW2 | ID: CZ

technical features

  • Range ME-GFW2: 500 kg
  • Output: 4...20 mA current loop
  • Limit value contacts: 2x electronically PNP
  • Supply: 12...40 VDC (out of current loop)
  • Electrical connection: 2x M12x1, 5-pole
  • Temperature range: -20...+55 °C
  • Overload protecrion: adjustable via 3 locking rings
  • Protection: IP65
  • Configuration: Keys / Software

ME-OEM-Transmitter

ME-OEM-Transmitter *'*

Type: ME-OEM | ID: OE

technical features

  • Input: RTD Pt100, strain gauge, mV, mA, V, R, potentiometer, PWM,
  • Input: TC type K, J, E, T, R, S, B / piezo
  • Potting: electronics potted
  • Process connection: customized, M12x1 female thread
  • Output: 4...20 mA
  • Limit value contacts: 2 electronically
  • Configuration: with keys/software
  • Electr. connection: M12, Super Seal, Deutsch, Bayonet, valve, cable
  • Protection: at least degree IP65

Modular differential pressure transmitter

Modular Differential Pressure Transmitter *'*

type: MEDS | ID: NJ

technical features

  • Input: differential pressure (range: 75 mbar to 70 bar)
  • Output: 4...20 mA current loop (12...45 VDC)
  • Accuracy: 0,075%, 0,1% of range (URL, LRL)
  • Setting: with keys and/or software
  • Material adapter: for process adapter M56: Stainless steel 1.4571
  • Material process: for pressurized parts: 1.4435
  • Electr. connection: several options available, see page 5
  • Process connection: 1/4-18 NPT
  • Operating temp.: -20...+70 °C
  • Protection classt: IP65
  • Display: 3 capacitive keys, 4-digits, 180° mirrorable

Ventilator control OEM

Ventilator control OEM

type: MEFC | ID: KH

technical features

  • Input: 12…30 VDC
  • Output: 0…16 A (PWM)
  • Application areas: oil cooling, water cooling
  • Approvals: KBA, CE type-approval certificate No. E1*10R06/01*9229*00
  • Medium temperature: max. 120 °C
  • Operating temperature: -40…85 °C
  • Connection ventilator: Delphi Metri-Pack 280 (female)
  • Connection supply: DT04-3P (male)
  • Protection class: IP67
  • Supply: 12…30 VDC
  • Dimensions: approx. 276 x 35 mm
  • Weight: approx. 307 g

Calorimetric flow sensor for gases

Calorimetric flow sensor for gases

Type: MEFS-K | ID: OU

technical features

  • Input: 0...10 m/s up to 0...30 m/s
  • Output: 4...20 mA
  • Supply: 24 VDC
  • Process connection: several options
  • Elecrical connection: serveral options
  • Temperature range: 0...+60 °C (ambient)
  • Limit value contacts: 2x electronically (NPN/PNP)
  • Protection: at least IP65
  • Adjustment: keys

Calorimetric flow sensor for gases

Calorimetric flow sensor for gases

Type: MEFS-KT | ID: OJ

technical features

  • Flow: 0...10 m/s bis 0...100 m/s(gases)
  • Output: 4...20 mA
  • Supply: 24 VDC
  • Process connection: 1/2" / 3/4" / 1" / 1,5" / 1/2NPT
  • Electrical connection: M12x1 / Deutsch DT04 / SuperSeal 1.5 / Bayonet / Valve / MIL
  • Sensor tube and Case: Stainless steel
  • Adjustment: in factory

Humidity sensor

Humidity sensor *'*

type: MEHS | ID: FI

technical features

  • Input: 0...100% rHF
  • Output: 4...20 mA
  • Supply: 12...30 V
  • Fitting length: 72...300 mm
  • Temperature range: -40...+80 °C
  • Process connection: 1/2", 3/4", 1", 1,5", 1/2NPT
  • Electrical connection: several options
  • Protection: at least IP65

Humidity sensor

Humidity sensor

type: MEHS-T | ID: OI

technical features

  • Input: 0...100% rHF
  • Output: 4...20 mA
  • Supply: 12...30 V
  • Fitting length: 72...300 mm
  • Temperature range: -40...+80 °C
  • Process connection: 1/2", 3/4", 1", 1,5", 1/2NPT
  • Electrical connection: several options
  • Protection: at least IP65

Level sensor with float HART

Level sensor with float

type: MELS-F | ID: OL

technical features

  • Measuring element: float
  • Potting: electronics completely potted
  • Material: in contact with medium stainless steel 1.4571
  • Process connection: 1", 1,5", 1"NPT
  • Output: 4...20 mA
  • Limit value contacts: 2 electronically
  • Configuration: with keys/software
  • Connection: M12, Super Seal, Deutsch, Bayonet, valve, cable
  • Protection: at least degree IP65

Level sensor with float

Level sensor with float

type: MELS-FT | ID: OV

technical features

  • Measuring element: float
  • Potting: electronics completely potted
  • Material: in contact with medium stainless steel 1.4571
  • Process connection: 1", 1,5", 1"NPT
  • Output: 4...20 mA
  • Configuration: software
  • Electrical connection: lateral, upwards
  • Connection: M12, Super Seal, Deutsch, Bayonet, valve, cable
  • Protection: at least degree IP65

Level sensor with float

Level sensor with float Ex

type: MELS-FTEx | ID: GI

technical features

  • Input: level 100…2000 mm
  • Output: 4…20 mA, 2-wire / 0…10 V, 3-wire
  • Supply: 12…30 VDC
  • Accuracy: see technical data
  • Process connection: several options
  • Electr. connection: several plugs
  • Electr. connection: lateral, Option: top
  • Operating temperature: -20…+75 °C, 2-wire / -20…+50 °C, 3-wire
  • Explosion protection: ATEX, IECEx
  • Medium temperature: max. 0…+100 °C
  • Protection class: min. IP65 / IP68

Melt Pressure Sensor

Melt Pressure Sensor *'*

type: MEMP-T | ID: AC

technical features


  • Input: 0...50 bar up to 0...1200 bar
  • Output: 4...20 mA, 2-wire / CANopen
  • Supply: by current loop 12...32 VDC
  • Accuracy: <0,5% of terminal value
  • Process connection: 1/2"-20UNF-2A with / without capillary tube
  • Electr. connection: MIL (standard), M12, cable outlet
  • Environmental temp.: -20...+85 °C
  • Medium temperature: -30...+410 °C
  • Setting: Software
  • Material: 1.4571 CrNi stainless steel
  • Protection class: at least IP65 / IP68

Pressure switch standard
ship

Pressure switch standard

type: MEPL-S | ID: NP

technical features

  • Input: 0...0,1 up to 0...1000 bar
  • Output: Relay with changeover contact
  • Voltage supply: 24...30 VDC
  • Accuracy sensor: 0,5% of nominal range
  • Process connection: G 1/2" / G 1/4" / 1/2 NTP / 1/4 NPT
  • Electrical connection: M12x1, 8-pole
  • Indication: LED red- Ambient temperature: -30...+80 °C (operation)
  • Adjustment switch point: by magnet / software
  • Material: Stainless steel 1.4571 (contact with medium)
  • Ingress protection: at least IP65

Pressure Sensor - Flush HART

Pressure Sensor - Flush *'*

type: MEPS-F | ID: OZ

technical features

  • Input: 0...0,1 to 0...600 bar / 0...0,25 to 0...16 bar
  • Output: 4...20 mA current loop (2-wire)
  • Supply: out of current loop (12...40 VDC)
  • Accuracy: see technical data
  • Process connection: G1/2B / G1B flush-mounted / G1 hygienic
  • Electrical connection: several options (page 3)
  • Ambient temperature: -20...+80 °C (operation)
  • Limit value contacts: 2x electronic (NPN, PNP)
  • Setting: Keys / Software
  • Medium temperature: -30...+100 °C
  • Protection: at least IP65

Pressure Transmitter Hygiene

Pressure Transmitter Hygiene *'*

type: MEPS-H | ID: OQ

technical features

  • Input: 0…160 mbar up to 0...25 bar
  • Output: 4…20 mA current loop (2-wire)
  • Supply: from current loop 12...40 VDC
  • Accuracy: see Technical Data
  • Process connection: flange hygiene version
  • Electrical connection: multiple options
  • Ambient temperature: -20…+80 °C (operation)
  • Limit value contacts: 2x electronic (NPN, PNP)
  • Setting: keys / software
  • Medium temperature: -30…+100 °C
  • Protection class: at least IP65

Pressure sensor standard

Pressure sensor standard *'*

type: MEPS-S | ID: OP

technical features

  • Pressure: relative, absolute
  • Ranges 0...0,1 bar up to 0...1000 bar
  • Potting: electronics completely potted
  • Material: in contact with medium stainless steel 1.4571
  • Process connection: 1/2" / 1/4" / 1/2NPT / 1/4NPT
  • Output: 4...20 mA
  • Limit value contacts: 2 electronically
  • Configuration: with keys/software
  • Connection: M12, Super Seal, Deutsch, Bayonet, valve, cable
  • Protection: at least degree IP65

Pressure sensor Radio

Pressure Sensor Radio

type: MEPS-SR | ID: ND

technical features

  • Input (pressure): absolute, relative 0...0,1 up to 0...1000 bar
  • Output: Radio transceiver
  • Voltage supply: 12...24 VDC / 6 W battery charge
  • Accuracy: see technical details
  • Process connection: several options
  • Electrical connection: without, M12x1 4-pole
  • Range: internal antenna 20 m / external antenna 100 m
  • Indication: Status signal via green/red LED
  • Material: 1.4571 / PA6.6 GF30 / PMMA
  • Temperature medium: -30...+100 °C
  • Protection: IP65

Pressure sensor

Pressure sensor

type: MEPS-T | ID: OD

technical features

  • Input: pressure 0…0,1 up to 0…1000 bar
  • Output: 4…20 mA (2-wire)
  • Voltage supply: out of current loop (12…35 VDC)
  • Accuracy: see technical details
  • Process connection: several options
  • Electrical connection: lateral, Option: upwards
  • Electrical connection: several plugs / cable
  • Temperature range: -20…+80 °C (operation)
  • Adjustment: software (TrComm)
  • Temperature medium: -30…+100 °C
  • Protection: at least IP65 / IP68

Pressure sensor

Pressure sensor Ex

type: MEPS-TEx | ID: GH

technical features

  • Input: pressure 0…0,1 up to 0…1000 bar
  • Output: 4…20 mA, 2-wire / 0…10 V, 3-wire
  • Voltage supply: 12…30 VDC
  • Accuracy: see technical details
  • Process connection: several options
  • Electrical connection: lateral, Option: top
  • Electrical connection: several plugs / cable
  • Temperature range: -20…+75 °C, 2-wire / -20…+50 °C, 3-wire
  • Explosion protection: ATEX, IECEx
  • Medium temperature: 0…+100 °C
  • Protection class: at least IP65 / IP68

Screw-in temperature switch

Screw-in temperature switch

Typ: METL-L | ID: NT

technical features

  • Sensor: RTD Pt 100
  • Potting: Electronics potted
  • Material towards medium: stainless steel 1.4571
  • Process connection: 1/4", 3/8", 1/2", 3/4", 1", 1/4" NPT, 3/8" NPT, 1/2" NPT
  • Output: open collector, 30 V, 200 mA
  • Indication: LED red
  • Accuracy: 0,5 °C  /  0,2 °C
  • Switch point adjustment: with magnet
  • Electrical connection: M12x1, 8-pole
  • Protection: at least IP65

Screw-in infrared temperature sensor

Screw-in infrared temperature sensor *'*

Typ: METS-IR | ID: OC

technical features

  • Measuring element: Infrared radiation
  • Maximum range: -40...+ 1000 °C
  • Output: 4...20 mA
  • Process connection: 1/2", 3/4", 1", 1/2" NPT
  • Voltage supply: 24 VDC +/- 10 %
  • Limit value contacts: 2 electronically
  • Configuration: with keys/software
  • Connection: M12 male, 8-pole
  • Protection: at least degree IP65

Screw-in thermocouple temperature sensor

Screw-in thermocouple temperature sensor *'*

Typ: METS-TS | ID: OS

technical features

  • Measuring element: thermocouple type K
  • Potting: electronics completely potted
  • Material: process connection stainless steel 1.4571
  • Process connection: 1/4", 3/8", 1/2", 3/4", 1", 1/4" NPT, 3/8" NPT, 1/2" NPT
  • Output: 4...20 mA
  • Limit value contacts: 2 electronically
  • Configuration: with keys/software
  • Connection: M12, Super Seal, Deutsch, Bayonet, valve, cable
  • Protection: at least degree IP65

Screw-in resistance temperature sensor radio

Screw-in resistance temperature sensor radio

Typ: METS-WR | ID: NC

technical features

  • Sensor element: RTD Pt 100, Class A
  • Maximum measuring range: -50...400 °C
  • Potting: Electronics potted by parts
  • Material: Process connection stainless steel 1.4571
  • Process connection: 1/4", 3/8", 1/2", 3/4", 1", 1/4" NPT, 3/8" NPT, 1/2" NPT
  • Output: Radio transceiver
  • Radio range: internal antenna 20 m / external antenna 100 m
  • Frequency: 868 MHz / 916 MHz
  • Supply: Lithium-ion battery pack
  • Configuration: Software
  • Connection: M12x1 (Charging of accumulator)
  • Protection: at least IP65

Magnetic Surface Temperature Sensor Radio

Magnetic Surface Temperature Sensor Radio

Typ: METS-WRM | ID: YA

technical features

  • Input: RTD Pt100 (maximum range -50...+400 °C)
  • Output: Radio transceiver
  • Voltage supply: Lithium-ion battery pack
  • Accuracy: ca. 0,2% FS
  • Process connection: clamping magnet
  • Electrical connection: Without / M12x1, 4-pole (charge, supply)
  • Radio range: internal antenna 20 m / external antenna 100 m radio
  • Temperature range: -20...+45...60 °C (ambient)
  • Configuration: Factory setting
  • Material: Stainless steel 1.5471 (medium contact)
  • Protection: At least IP65

Screw-in resistance temperature sensor

Screw-in resistance temperature sensor

Typ: METS-WS | ID: OR

technical features

  • Measuring element: RTD Pt 100
  • Potting: electronics completely potted
  • Material: process connection stainless steel 1.4571
  • Process connection: 1/4", 3/8", 1/2", 3/4", 1", 1/4" NPT, 3/8" NPT, 1/2" NPT
  • Output: 4...20 mA
  • Limit value contacts: 2 electronically
  • Configuration: with keys/software
  • Connection: M12, Super Seal, Deutsch, Bayonet, valve, cable
  • Protection: at least degree IP65

Magnetic Surface Temperature Sensor

Magnetic Surface Temperature Sensor *'*

Typ: METS-WSM | ID: NX

technical features

  • Input: RTD Pt100 (maximum range -50...+200 °C)
  • Output: 4...20 mA current loop (2-wire)
  • Voltage supply: out of current loop (12...40 VDC)
  • Accuracy: see technical details
  • Process connection: clamping magnet
  • Electrical connection: several plugs
  • Temperature range: -20...+80 °C (ambient)
  • Limit value contacts: 2 electronically (NPN / PNP)
  • Adjustment: keys / software
  • Material: stainless steel 1.5471 (medium contact)
  • Protection: at least IP65

Screw-in resistance temperature sensor

Screw-in resistance temperature sensor *'*

Typ: METS-WT | ID: OH

technical features

  • Measuring element: RTD Pt 100
  • Potting: electronics completely potted
  • Material: process connection stainless steel 1.4571
  • Process connection: 1/4", 3/8", 1/2", 3/4", 1", 1/4" NPT, 3/8" NPT, 1/2" NPT
  • Output: 4...20 mA
  • Electrical connection: lateral, upwards
  • Configuration: software
  • Connection: M12, Super Seal, Deutsch, Bayonet, valve, cable
  • Protection: at least degree IP65

Screw-in resistance temperature sensor Ex

Screw-in resistance temperature sensor Ex

Typ: METS-WTEx | ID: GF

technical features

  • Input: Pt100 (maximum span: -50…+200 °C)
  • Output: 4…20 mA, 2-wire / 0…10 V, 3-wire
  • Voltage supply: 12…30 VDC
  • Accuracy: see technical data
  • Process connection: several options
  • Electr. connection: Lateral / Option: Top
  • Electr. connection: several plugs / cable
  • Temperature range: -50…+425 °C (environment)
  • Explosion protection: ATEX, IECEx
  • Material: Stainless steel 1.4571 (medium contact)
  • Protection class: at least IP65

Magnetic Surface Temperature Sensor

Magnetic Surface Temperature Sensor *'*

Typ: METS-WTM | ID: NW

technical features

  • Input: RTD Pt100 (maximum range -50...+200 °C)
  • Output: 4...20 mA current loop (2-wire)
  • Voltage supply: out of current loop (12...40 VDC)
  • Accuracy: see technical details
  • Process connection: clamping magnet
  • Electrical connection: several plugs
  • Temperature range: -20...+80 °C (ambient)
  • Limit value contacts: 2 electronically (NPN / PNP)
  • Adjustment: software
  • Material: stainless steel 1.4571 (medium contact)
  • Protection: at least IP65

Ultrasonic Sensor

Ultrasonic Sensor *'*

type: MEUS | ID: OX

technical features

  • Input: Ultrasonic echo
  • Ranges: 300...3500 mm, 200...2000 mm
  • Output: 4...20 mA, 3-wire system
  • Supply: 24 VDC
  • Process connection: M30x1,5, M18x1
  • Electrical connection: M12x1, 8-pole
  • Temperature range: -15...+70 °C
  • Limit value contacts: 2 electronically (NPN/PNP)
  • Configuration: with keys/software
  • Material sensor tube: stainless steel, Option: synthetic

OEM Transmitter 2-channel IO-Link

OEM Transmitter 2-channel IO-Link

Type: MEUT-E | ID: NV

technical features

  • Input channel 1: Strain gauge full bridge
  • Input channel 2: Universal
  • Output: IO-Link Interface
  • Resolution: 16 bit / 24 bit
  • Accuracy: max. 0,05% of nominal range
  • Operating temperature: -20…+85 °C
  • Protection class: IP00
  • Dimensions: 40x17x8,25 mm
  • Supply: 24 VDC

2-Channel Transmitter IO-Link + PLc

2-Channel Transmitter IO-Link + PLc

Type: MEUTS-SIL | ID: IX

Technical Features

  • Input channel 1: Strain gauge full bridge
  • Input channel 2: Universal
  • Outputs: IO-Link interface and 4…20 mA
  • Supply: 24 VDC
  • Resolution: 16 bit / 24 bit
  • Response time PL c: max. 10 ms
  • Limit values: 2, with PL c, see page 4
  • Connection: Soldering pads
  • Protection class: IP00
  • Operating temperature: -20…+85 °C
  • Material: FR4, PBT

Mobile telemetrie load cell

Mobile telemetrie load cell

type: MFWZ | ID: FW

technical features

  • Ranges from 1t up to 500t
  • For use with standard lifting shackles
  • Distance 120m
  • Auto power down
  • Up to 255 links can be used
  • Accuracy 0,05% of end scale value
  • Degree of protection IP67 (load cell) respectively IP65 (hand held display)
  • Robust constuction

Universal transmitter

Universal transmitter

Type: MH-1U | ID: ▒

technical features

  • measuring input: direct voltage, direct current, Pt100(0), thermocouple, frequency,
    rotational speed, counter
  • display: red display of -199…999 digits
  • digit height approx. 7mm
  • min/max value recording
  • 9 adjustable supporting points
  • display flashing at threshold value exceedance / threshold value undercut
  • Tara function
  • programming interlock via access code
  • pluggable screw-terminal
  • optional: analog output 0-10 VDC, 0/4-20 mA switchable
  • optional: interfaces RS232 / RS485 / Bluetooth
  • optional: sensor supply incl. digital input
  • optional: 2 relay outputs / 2 PhotoMos-outputs / 2 relay outputs & 2 PhotoMos-outputs
  • optional: Bluetooth interface
  • optional: data logger
  • accessories: PC-based configuration kit PM-TOOL with CD & USB adapter

Electronical limit value contacts for MH-Series

Electronical limit value contacts for MH-Series ***

type: MH-LVE

technical features

  • Input: 4...20 mA current loop
  • Supply: out of current loop
  • Limit contacts: 2 open collectors (36 VDC, 150 mA)
  • Connection: plug-in terminal strip
  • Accuracy: 0,2% of range, 1 digit
  • Protection: IP20 (PCB)
  • Mounting: plugable with fastening screws
  • Settings: with 3 keys

Modular differential pressure transmitter

Modular differential pressure transmitter ***

type: MHDS | ID: HD

technical features

  • Pressure: differential
  • Ranges from 10 mbar … 100 bar
  • Output: 4...20 mA
  • Supply voltage: current loop, 15...30VDC
  • Accuracy: 0,1%, 0,075%, 0,2% of span
  • Degree of protection: IP65
  • Medium contact parts stainless steel 1.4435
  • Process connection 1/4-18NPT
  • Display with programming keys
  • Turn down up to 100:1

Modular pressure transmitter

Modular pressure transmitter ***

type: MHPS | ID: HP

technical features

  • Pressure: relative, absolute
  • Ranges 0...0,1 bar up to 0...1000 bar
  • Output: 4...20 mA
  • Supply voltage: current loop, 15...30VDC
  • Accuracy: 0,25% (0,5%) of span
  • Degree of protection: IP65
  • Medium contact parts: CrNi steel
  • Process connection: 1/2" / 1/4" / 1/2NPT / 1/4NPT / M20x1,5
  • Display with programming keys
  • Turn down up to 100:1

Modular temperature transmitter

Modular temperature transmitter ***

type: MHTT | ID: HM

technical features

  • Input: RTD / TC / voltage (mV)/ resistance (potentiometer)
  • Output: 4...20 mA current loop
  • Supply: 15...45 VDC out of current loop
  • Accuracy: 0,08...0,12% of range
  • Indication: LCD display (backlighting)
  • Galvanical insulation: input / output
  • Settings: software
  • Enclosure: diecast aluminium

Modular Compact Temperature Sensor

Temperature Sensor Hygiene *'*

type: MHY-TS | ID: VH

technical features

  • Input: RTD Pt 100, Pt 1000
  • Measurement range: -50...+200 °C maximum
  • Accuracy transmitter: 0,3% of range
  • Accuracy RTD Pt100(0): Class A, Class AA, Class B
  • Output: 4...20 mA / RTD / CANopen
  • Resolution: 16 bit
  • Configuration: Via software
  • Electrical connection: M12 4-pole, M12 8-pole
  • Internal protection: Inside potted completely
  • Material: Stainless steel 1.4571
  • Protection class: At least IP65

Differential pressure sensor

Differential pressure sensor *'*

type: MIDS | ID: MD

technical features

  • Ranges 0…10 mbar, 0…40 mbar or 0…100 mbar
  • Potting: electronics potted
  • Process connection: 2x hose connection 4 mm
  • Output: 4...20 mA
  • Configuration: factory configuration via software
  • Connection: M12, Super Seal, Deutsch, Bayonet, valve, cable
  • Protection: at least degree IP65

Differential pressure sensor

Relative Pressure Transmitter *'*

type: MIPS | ID: MO

technical features

  • Input: pressure 0...10 mbar bis 0...100 mbar
  • Output: 4...20 mA current loop (2-wire)
  • Voltage supply: out of current loop (12...40 VDC)
  • Accuracy: see technical details
  • Process connection: 1x hose connection
  • Medium: clean dry air, dry gases
  • Electrical connection: several plugs / cable
  • Temperature range: -20...+80 °C (operation)
  • Adjustment: software
  • Material enclosure: PBT GF 30
  • Protection: at least IP65

Strain gauge amplifier

Strain gauge amplifier *'*

type: MISG | ID: MJ

technical features

  • Input strain gauge: 1 full bridge, 4-wire
  • Input sensitivity: 1...4 mV/V
  • Output: 4...20 mA
  • Voltage supply: 12...40 VDC
  • Resolution: 16 bit
  • Combined error: 0,3% of range
  • Bridge supply: 1 VDC
  • Protection: at least IP65
  • Configuration: Software

Strain gauge amplifier IO-Link

Strain gauge amplifier IO-Link

Typ: MISG-IO | ID: FC

Technical features

  • Input: 1 strain gauge full bridge
  • Bridge load: minimal 350 Ohm
  • Measurement range: free adjustable in a range of -32000...+32000
  • Output: IO-Link
  • Resolution: 16 bit
  • Strain gauge supply: 3 VDC
  • Gross error: 0,05% of range
  • Electrical connection: several plugs, cable
  • Casing: PBT GF30 black
  • Dimensions: 72x28x35 mm (without electrical connection)
  • Protection class: at least IP65

room temperature sensor

Room temperature sensor *'*

Type: MITS | ID: MR

technical features

  • Sensor: RTD Pt100, Pt1000, 2-, 3-, 4-wire
  • Enclosure: inside completely potted
  • Protecting tube: stainless steel 1.4571
  • Range: -30...+60 °C
  • Option: transmitter 4...20 mA
  • Connection: MIL plug, valve plug, M12x1, cable
  • Protection: at least IP65

Universal Transmitter 2-channel IO-Link

Universal Transmitter 2-channel IO-Link

Type: MIUT-IO | ID: NO

Technical features

  • Input channel 1: Strain gauge full bridge
  • Input channel 2: Universal
  • Output: IO-Link
  • Resolution: 16 bit / 24 bit
  • Accuracy: max. 0,05% of nominal range
  • Operating temperature: -20...+85 °C
  • Electrical connection: M12, 5-pole
  • Sensor connection: M12, 8-pole
  • Configuration: Software
  • Material: PBT-GF 30
  • Protection class: IP65

Modular conductivity level switch

Modular conductivity level switch

type: MKCS | ID: MC

technical features

  • Input: conductivity
  • Medium: non aggressive fluids
  • Fitting length: up to 200 mm
  • Process connection: several options
  • Electrical connection: several options
  • Material body: stainless steel 1.4571
  • Material insulator: Teflon
  • Output: 1 electronic changeover contact or conductivity
  • Degree of protection: IP67

Modular compact differential pressure transmitter

Modular compact differential pressure transmitter *'*

type: MKDS | ID: MP

technical features

  • Pressure: differential
  • Ranges from 75 mbar up to 70 bar
  • Output: 4...20 mA
  • Supply voltage: current loop, 12...30VDC
  • Accuracy: 0,1%, 0,075%, 0,2% of span
  • Degree of protection: IP65
  • Medium contact parts stainless steel 1.4435
  • Process connection 1/4-18NPT
  • Turn down up to 100:1

Modular and compact flow sensors

Modular and compact flow sensors

type: MKFS | ID: MF

technical features

  • Flow rate: 0...25 m/s (gases)
  • Output: 4...20 mA / 0...20 mA / 0...10 V
  • Supply: 24 VDC
  • Process connection: several options possible
  • Interface: RS232 (optionally, Adaptor necessary)
  • Elektrical connection: several option possible
  • Thermowell and case: stainless steel 1.4571
  • Standard thermowell: 6x0,5 mm

Modular and compact level sensor/switch

Modular and compact level sensor/switch *'*

type: MKLS | ID: MN

technical features

  • Input: conductivity
  • Level: 100...2000 mm
  • Medium: non aggressive fluids
  • Option: with RTD Pt100, 2-wire
  • Process connection: several options
  • Electrical connection: several options
  • Material: stainless steel 1.4571
  • Output: 4...20 mA / contacts
  • Degree of protection: IP65 (electronics) /
    IP 68

Modular temperature switch

Modular temperature switch

type: MKTL | ID: ML

technical features

  • Switching temperature: 5...180 °C
  • Switching element: bimetal, creep action
  • Contact: normally closed, normally open
  • Length: 27...1000 mm
  • Material: thermowell, body stainless steel 1.4571
  • Process connection: 3/8", 1/2", 3/4", 1", 3/8" NPT, 1/2" NPT
  • Accuracy: +/- 5 K
  • Connection: several plugs, cable
  • Protection: at least IP 65

Modular compact temperature sensor

Modular compact temperature sensor *'*

type: MKTS | ID: MK

technical features

  • Measuring element as Pt 100, Pt 1000, 2-, 3-, 4-wire
  • Inside of case completely potted
  • Protection tube and case are made of stainless steel 1.4571
  • Process terminal thread 1/4", 3/8", 1/2", 3/4", 1/4" NPT, 3/8" NPT, 1/2" NPT
  • optional transmitter 4...20 mA, programmable
  • Cable connection with plug MIL D38999, valve plug DIN EN 175301-803,
  • RSE4 compatible plug M12x1, cable entry M12x1,5 with cable
  • Degree of protection IP 67

Insertion Thermometer

Insertion Thermometer

type: MKTS-EL | ID: WL

Technical Features
  • Input: Pt100 3-wire / type K / type K with display
  • Measuring range: -50...+400 °C maximum
  • Accuracy transmitter: 0,3% of range
  • Accuracy RTD Pt100: Class A, Class AA, Class B
  • Output: with transmitter / without transmitter
  • Resolution: 16 bit
  • Configuration: via software
  • Connection: Several plugs, cable
  • Length: 500 / 1000 / 1500 / 2000
  • Material: Stainless steel 1.4571, PBT GF30
  • Protection class: At least IP65

Modular compact temperature sensor Ex

Modular compact temperature sensor Ex

type: MKTS-Ex| ID: GN

technical features

  • Input: RTD Pt 100 / Pt 1000
  • Measurement range: -50…+200 °C maximum
  • Supply: 12…30 VDC
  • Accuracy RTD Pt100(0): Class A
  • Output: several, see Technical Data
  • Resolution: 24 bit
  • Configuration: via software (TrComm)
  • Connection: several plugs, cable
  • Explosion protection: ATEX, IECEx
  • Material: stainless steel 1.4571, PBT GF30
  • Protection class: at least IP65

Modular compact temperature sensor with GL-approval

Modular compact temperature sensor with GL-approval

type: MKTS-GL | ID: MK

technical features

  • Measuring element as Pt 100, Pt 1000, 2-, 3-, 4-wire
  • Inside of case completely potted
  • Protection tube and case are made of stainless steel 1.4571
  • Process terminal thread 1/4", 3/8", 1/2", 3/4", 1/4" NPT, 3/8" NPT, 1/2" NPT
  • optional transmitter 4...20 mA, programmable
  • Cable connection with plug MIL D38999, valve plug DIN EN 175301-803,
  • RSE4 compatible plug M12x1, cable entry M12x1,5 with cable
  • Degree of protection IP 67

Hand-held temperature sensor

Hand-held temperature sensor *'*

Type: MKTS-HA | ID: MH

Technische Features

  • Measuring element: RTD Pt 100(0), 2-, 3-, 4-wire
  • Accuracy: Class A, B, B 1/2 DIN
  • Output: RTD Pt100(0), 4...20 mA, interface
  • Enclosure inside completely potted
  • Protecting tube and handle made of stainless steel 1.4571
  • Process connection: tip of tube flat, pointed
  • Length of tube: 50...1000 mm
  • Connection: several plugs, cable
  • Protection: IP65

Modular compact temperature sensor IO-Link

Modular compact temperature sensor IO-Link

type: MKTS-IO| ID: MX

technical features

  • Input: Pt 100 / thermocouple type J / K / N
  • Measurement range: -50…+200 °C maximum
  • Accuracy transmitter: max. 0,02% of range
  • Operating temperature: -20…+80 °C
  • Output: IO-Link
  • Resolution: 16 bit
  • Configuration: via software (IO-Link interface)
  • Electrical connection: Several plugs, cable
  • Internal protection: Inside completely potted
  • Material: Stainless steel 1.4571, PBT GF30
  • Protection class: At least IP65

Modular temperature sensor with spring

Modular temperature sensors with spring *'*

type: MKTS-SP | ID: MK

technical features

  • Input: RTD Pt100, Pt1000 | Type K cross-band sensor 
  • Connection: 2-wire | 3-wire | 4-wire
  • Measuring range: -50...+150 °C maximum
  • Accuracy transmitter: 0,3% of range
  • Accuracy RTD PT100: Class A, Class AA, Class B
  • Output: 4...20 mA RTD
  • Resolution: 16 bit
  • Configuration: via software
  • Internal protection: inside completely potted
  • Material: stainless steel 1.4571, PBT GF30
  • Protection: at least IP65

Modular temperature sensor with spring IO-Link

Modular temperature sensors with spring IO-Link

type: MKTS-SPIO | ID: MY

technical features

  • Input: Pt100 / Thermocouple Type J/K/N
  • Measurement range: -50...+150 °C
  • Accuracy transmitter: max. 0,05% of range
  • Operating temperature: -20...+80 °C
  • Output: IO-Link
  • Resolution: 16 bit
  • Setting: via software (IO-Link interface)
  • Electrical connection: M12x1, 4-pole
  • Internal protection: inside completely potted
  • Material: stainless steel 1.4571, PBT GF30
  • Protection class: at least IP65

Vibration Sensor IO-Link

Vibration Sensor IO-Link

type: MKVS | ID: ZM

technical features

  • Input: Vibrations, temperature
  • Outputs: IO-Link / analogue / switch contact
  • Supply: 18…30 VDC
  • Current consumption: max. 700 mA
  • Frequency range: 10…1000 Hz
  • Accuracy: see Technical Data
  • Electrical connection: Plug M12, 4-pole
  • max. acceleration: ±15 g
  • Switching contacts: Low Active / High Active
  • Casing material: Stainless steel V2A (1.4305)
  • Service life: 10 years

Mobile Cable Load Cell

Mobile Cable Load Cell

type: MKWZ | ID: FY

technical features

  • Measurement ranges from 1 t up to 500 t
  • Can be used with standard load lugs
  • Input resistance 700 +-20 Ohm
  • Operating temperature -10...+80 °C
  • Full load output 1,5(+-0,25%) mV/V
  • Accuracy 0,05% of end scale value
  • Protection class IP66 (load cell) bzw. IP65 (handset display)
  • Robust design

Modular Universal Differential Pressure Sensor

Modular Universal Differential Pressure Sensor

type: MUDS | ID: JR

technical features

  • Input: Differential pressure
  • Output: 4…20 mA / 0…10 VDC
  • Voltage supply: 9…35 VDC / 12…35 VDC / 12…24 VAC
  • Accuracy: see technical data
  • Process connection: 2x 1/4" socket connection (VA inserts)
  • Medium: liquids and gases
  • Electrical connection: several plugs / cable
  • Temperature range: -40…+80 °C (operation)
  • Configuration: Software
  • Material casing: PBT GF 30 / 1.4571 / Aluminum (anodized)
  • Protection class: at least IP65

Modular Universal Load Cell SIL3 + PL"e"

Modular Universal Load Cell SIL3 + PL"e"

type: MULC | ID: CH

technical features

  • Sensor input: 1x strain gauge full bridge
    (350 ohms)
  • Function load cell: tension load | compression load | tension and compression load
  • Measuring range: 500 kg | 1000 kg | 1500 kg | 3000 kg
  • Analog output: 2x 4...20 mA
  • Power supply: 24 VDC ±10%
  • Accuracy: see data sheet
  • Protection: IP54
  • Vibration protection: electronics completely potted
  • Test input: test pulse 24 VDC, ≤250 Hz
  • Material load cell: stainless steel, alloy steel nickel-plated
  • Certificates: SIL3, Performance Level "e"

Modular Universal Load Cell SIL3 + PL"e"

Modular Universal Load Cell IO-Link

type: MULC-IO | ID: CK

technical features

  • Input: Load suspension device
  • Function load cell: Tension / Compression / Tension and compression
  • Measuring range: 500 kg | 1000 kg | 1500 kg | 3000 kg
  • Output: IO-Link interface
  • Voltage supply: 24 VDC
  • Accuracy: See technical data
  • Protection class: IP54
  • Vibration protection: Electronics completely potted
  • Configuration: per software (IO-Link)
  • Material load cell: Stainless steel / Tool steel nickel-plated
  • Accessories: Rod ends

Modulare Universal - Load Cell

Modular Universal Load Cell Standard

Type: MULC-S | ID: CH

technical features

  • Sensor input: load suspension device
  • Function load cell: tension load | compression load |
  • tension and compression load
  • Measuring range: 500 kg | 1000 kg | 1500 kg |  3000 kg
  • Output: strain gauge / 4...20 mA
  • Supply: 12...40 VDC current loop / bridge supply 10 V
  • Accuracy: see technical data
  • Protection: IP54
  • Vibration protection: electronics completely potted
  • Configuration: via superimposed communication
  • Material load cell: stainless steel, alloy steel nickel-plated
  • Accessories: rod end

Visualisization Software

Visualisization Software

type: MVS | ID: VS

technical features

  • Function: Measured value visualization
    Configuration of MVS-DR
    Configuration of MVS-HD
  • Requirements: MacOS / Linux / Win7 - Win10
    min. 100 MB HDD storage
  • Value indication: Table (with CSV-export)
    Diagram
    Live
    Graphical (configurable)

Radio-Gateway-Server

Radio-Gateway-Server

type: MVS-DR | ID: VG

technical features

  • Wireless input: 16 channels for sensors / transmitters
  • Input: 2 SIM-slots for sensors / transmitters
  • Wireless output: W-LAN
  • Output: 4 USB 2.0 / Ethernet
  • Supply: 24 VDC / 230 VAC
  • Range: external antenna 100 m
  • Casing: DIN-Rail, 45mm
  • Operating system: Linux Debian
  • Internal storage: 16 GB internal (4GB reserved for OS)
  • Functions: Receiving / storing of measured values message if limit value is exceeded at low battery level: Mobile e-mail broadcast

Pressure measuring transducer

Pressure measuring transducer

type: NDR | ID: DN

technical features

  • Positive and negative over pressure differential pressure, absolute pressure
  • Measurement range 0...0,1mbar up to 0...1000mbar, Special absolute ranges
  • Output 0..10V, 0(4)...20mA, -5...+5 V, -10...+10 V, 4...20 mA 2-wire
  • Accuracy 1%, 0,5%, 0,2% of end scale value
  • Supply voltage 19...31 VDC, 230 VAC, 115 VAC, 24 VAC
  • LCD digital display 3,5 digit
  • Square root function for output signal
  • Limit contacts

Digital indicator RS232, RS485 BCD
digit height 14 mm

type: PB4 | 72 x 24

technical features

  • Display: 4 digits
  • Color: red
  • Operation: keyboard rear side
  • Displayed range: ASCII, BCD
  • Interface: RS232, RS485, BCD address codified
  • Supply: 24 VDC

Digital indicator RS232, RS485 BCD
digit height 14 mm

type: PB4 | 72 x 36

technical features

  • Display: 4 digits
  • Color: red
  • Operation: front panel keyboard
  • Displayed range: ASCII, BCD
  • Interface: RS232, RS485, BCD address codified
  • Supply: 24 VDC

Digital indicator RS232, RS485 BCD
digit height 14 mm

type: PB6 | 96 x 24

technical features

  • Display: 6 digits
  • Color: red
  • Operation: keyboard rear side
  • Displayed range: ASCII, BCD
  • Interface: RS232, RS485, BCD address codified
  • Supply: 24 VDC

Process calibrator current loop

Process calibrator current loop

type: PC-HA-CL | ID: PK-4

technical features

  • Input voltage: 28 V
  • Input current / loop current: 20 mA
  • Resolution voltage: 1 mV
  • Resolution current / loop current: 0,001 mA
  • Accuracy voltage: 0,02% of set value / 2 mV
  • Acccuracy current / loop current: 0,02% of set value / 4 µA
  • Output current: 20 mA
  • Output simulation transmitter: -20 mA
  • Output loop supply: 28 V
  • Resolution current: 0,001 mA
  • Resolution simulation transmitter: 0,001 mA
  • Accuracy current: 0,05% of set value / 4 µA
  • Accuracy simulation transmitter: 0,05% of set value / 4 µA
  • Accuracy loop supply: 10%
  • Supply: 9 V battery
  • Contained in delivery: transportation case, 1 set measuring cable

Process calibrator RTD

Process calibrator RTD

type: PC-HA-RTD | ID: PK-1

technical features

  • Output / input resistance: 400 ohms
  • Output / input RTD: PT100 / Cu50
  • Resolution resistance: 0,1 ohms
  • Resolution RTD: 0,1 °C
  • Accuracy resistance: 0,05% of set value / 0,2 ohms
  • Accuracy RTD: 0,05% of set value / 0,6 °C
  • Supply: 9 V battery
  • Contained in delivery: transportation case, 1 set measuring cable

Process calibrator thermocouple

Process calibrator thermocouple

type: PC-HA-TC | ID: PK-2

technical features

  • Output voltage: 100 mV / 1000 mV
  • Input voltage: 100 mV
  • Output/input thermocouple: Typ R, S, B, E, K, J, T, N
  • Resolution voltage: 0,1 mV / 0,01 mV
  • Resolution thermocouple: 1 °C / 0,1 °C
  • Accuracy voltage: 0,05% of set value / 30µV / 0,3 mV
  • Accuracy thermocouple: 0,05% of set value / 3 °C / 2 °C / 1 °C
  • Supply: 9 V battery
  • Contained in delivery: transportation case, 1 set measuring cable

Process calibrator temperature

Process calibrator temperature

type: PC-HA-Temp | ID: PK-3

technical features

  • Output voltage: 100 mV / 1000 mV
  • Output resistance: 400 ohms
  • Output TC: types R, S, B, E, K, J, T, N
  • Output RTD: Pt100 / Cu50
  • Resolution voltage: 0,1 mV / 0,01 mV
  • Resolution resistance: 0,1 Ohm
  • Resolution TC: 1 °C / 0,1 °C
  • Resolution RTD: 0,1 °C
  • Accuracy voltage: 0,05% of set value / 30µV / 0,3 mV
  • Accuracy resistance: 0,05% of set value / 0,2 Ohm
  • Accuracy TC: 0,05% of set value / 3 °C / 2 °C / 1 °C
  • Accuracy RTD: 0,05% of set value / 0,1 °C
  • Supply: 9 V battery
  • Contained in delivery: transportation case, 1 set measuring cable

Process calibrator current voltage

Process calibrator current voltage

type: PC-HA-VmA | ID: PK-0

technical features

  • Output current: 20 mA
  • Output voltage: 10 V
  • Output: simulation transmitter
  • Output: power supply current loop
  • Resolution current: 0,001 mA
  • Resolution voltage: 1 mV
  • Accuracy current: 0,05% of set value/ 4 µA
  • Accuracy voltage: 0,05% of set value / 2 mV
  • Supply: 9 V battery
  • Contained in delivery: transportation case, 1 set measuring cable

Process calibrator current voltage

Process calibrator multifunction

type: PC-MF | ID: PF

technical features

  • Output Current: 20 mA
  • Output Voltage: 100 mV, 1V, 10 V
  • Output Resistanc: 400 Ohms, 4 kOhms, 40 kOhms
  • Output TC: Types R, S, K, E, J, T, N, B
  • Output RTD: Pt100, Pt1000, Cu50
  • Output Frequency: 100 Hz, 1 kHz, 10 kHz, 100 kHz
  • Output Pulse sequence: 10...100000 cycles
  • Output Pulse switch interval: 100 Hz, 1 kHz, 10 kHz, 100 kHz
  • Other Outputs: Simulation transmitter, Loop supply
  • Input Current: 50 mA
  • Input Voltage: 50 mV, 500 mV, 5 V, 50 V
  • Input Resistance: 500 Ohms, 5 kOhms
  • Input Frequency: 100 Hz, 1 kHz, 10 kHz
  • Input TC: Types R, S, K, E, J, T, N, B
  • Input RTD: Pt100, Pt1000, Pt200, Pt500, Cu10, Cu50
  • Other Inputs: contact test, Continuity test
  • Basic accuracy: 0,02%
  • Supply: 4x 1,5 V AAA batteries

Digital indicator - counter

digit height 14 mm

type: PC4 | 72 x 24

technical features

  • Display: 4 digits (0...9999)
  • Colour: red
  • Operation: front panel keyboard
  • Input: up to 10000 impulses/s
  • Switching output: 2 PhotoMOS

Digital indicator - counter

digit height 14 mm

type: PC4 | 72 x 36

technical features

  • Display: 4 digits (0...9999)
  • Colour: red
  • Operation: front panel keyboard
  • Input: up to 10000 impulses/s
  • Supply: 24 VDC
  • Switching output: 2 PhotoMOS

Digital indicator - counter

digit height 14 mm

type: PC6 | 96 x 24

technical features

  • Display: 6 digits (0...999999)
  • Colour: red
  • Operation: front panel keyboard
  • Input: up to 10000 impulses/s
  • Sensor supply: 24 V
  • Supply: 24 VDC
  • Switching output: 2 PhotoMOS

Digital indicator - counter

digit height 14 mm

type: PC6 | 96 x 48

technical features

  • Display: 6 digits (0...999999)
  • Colour: red
  • Operation: front panel keyboard
  • Input: up to 10000 impulses/s
  • Sensor supply: 24 V
  • Supply: 24 VDC, 115/230 VAC
  • Switching output: 2 PhotoMOS

Signal Converter Current / Voltage / Switch

Signal Converter Current / Voltage / Switch

Typ: PCV20 | ID: PH

Technical Features

  • Input: 3x Current / 3x Voltage
  • Output: Analog / Pulse / Switch
  • Supply: 24 VDC (max. 12…35 VDC)
  • Current consumption: max. 4 VA
  • Galvanic isolation: Yes
  • Accuracy: see technical data
  • Electrical connection: 4 plug-in terminal strips, 4-pole
  • Operating temperature: -20…+60 °C
  • Humidity: max. 90% rH, non-condensing
  • EMC: EN ISO 50081-1 / EN ISO 50082-2
  • Safety: EN ISO 60730-1

Pressure, digit height 10mm

Digital indicator pressure, digit height 10 mm

type: PDE4 | 48 x 48

technical features

  • Display: 4 digits (0...9999)
  • Color: red
  • Operation: front panel keyboard
  • Input: 0...16 bar relative
  • Switching output: 1 Relay (changeover contact)
  • Analog output: 0/4...20 mA, 0...10 V
  • Supply: 24 VDC
  • Pressure connection: 4 mm quick-release connector
  • Not suitable for oxygen measurement

Capacitive level switch for pharma and food

Capacitive level switch for pharma and food

type: PFKS | ID: ▒

technical features

  • Input: Aqueous media
  • Output: PNP, 50 mA
  • Supply: 24 VDC
  • Reponse time: 140 ms
  • Process connection: G1/2" hygienically
  • Electrical connection: M12x1, 4-pole
  • Temperature range: -10...60 °C (operation)
  • Sensor tip: PEEK
  • System pressure: 10 bar maximum
  • Process temperature: 0...100 °C
  • Protection: IP67 (electronics) / IP68

Plattform load cell

Plattform load cell

type: PL-WZ | ID: PW

technical features

  • Ranges: 0...3 up to 0...200 kg
  • Applications: OEM
  • Output: 2mV/V
  • Material: aluminium alloy
  • Connection: cable 420 mm, 4-wire
  • ccuracy: 0,2% of range
  • Protection: IP65

PM5 - DMS - mass pressure - digit height 14 mm

Digital indicator strain gauge / mass pressure
digit height 14 mm

type: PM5 strain gauge / mass pressure | 96 x 48

technical features

  • Display: 5 digits (-9999...99999)
  • Color: red
  • Operation: front panel keyboard
  • Input: strain gauge / mass pressure 1...6 mV/V
  • Switching contact: Relay (Option)
  • Analog output: 1x 0/4...20 mA, 0...10 V
  • Interface: RS232, RS485
  • Sensor supply: 10 VDC / 50 mA
  • Digital input

Modularity without limits: high flexibility by sophisticated modular concept

The product series by Müller Industrie-Elektronik are characterized by a very high flexibility concerning the sensor equipment and the range of application due to its modular diversity. The sensors are available modular with common connectors well-established in the industry. The product series cover nearly all physical measuring categories like temperature, pressure, differential pressure, level, flow and humidity.


The extensive product programme of Müller Industrie-Elektronik encloses measuring instruments and indicating and evaluation electronics for the industrial measuring technology and control technology. Sensors, universal transmitter and measuring amplifiers for the signal processing and digital displays stand for applications of the temperature, pressure, differential pressure, level, humidity and force measuring technology for the choice.

Pressure transducer mobile

Pressure transducer mobile

type: PS-LC | ID: UL

technical features

  • Kind of pressure: relative
  • Pressure ranges: 0...10 bar up to 0...1000 bar
  • Output: 4...20 mA, 0...20 mA, 0...10 V, 0...5 V, 1...6 V
  • Material in contact with medium: stainless steel CrNi
  • Accuracy: up to 1% FS
  • Degree of protection: at least IP67
  • Process connection: 1/4", 1/4"NPT, M14x1,5, SAE 04, SAE 06
  • Temperature medium: -40...150 °C
  • Connection: M12, Super Seal, Deutsch, Bayonet, Cable

Analog Transmitter Universal OEM

Strain Gauge Overload Protection PLc

Type: PS-SIL | ID: SV

Technical Features

  • Input: max. ±3 VDC
  • Output: max. 30 VAC / VDC at max. 500 mA
  • Supply: 18…36 VDC at max. 15 mA
  • Strain gauge supply: 0,5…5 VDC
  • Limit value: 0,5…8,2 +-0,05 mV
  • Accuracy: ±50 µV
  • Response time: 50 ms
  • Connection: Soldering pads
  • Material: FR4, PBT
  • Protection class: IP00
  • Approval: PLc / SIL1

Pressure transmitter economic

Pressure transmitter economic

type: PT-AL | ID: UA

technical features

  • Pressure: relative or absoluta
  • Ranges: 0...1 bar up to 0...600 bar
  • Output: 4...20 mA, 0...10 V, 0...5 V, 1...5 V 0,5...4,5 V, 0,5...4,5 V ratiometric
  • Supply voltage: current loop, 8(14)...30(36)VDC, 5 VDC
  • Accuracy: 0,5% (0,25%)of range
  • Protection: IP65 bzw. IP67
  • Wetted parts: 316L, 13-18-PH
  • Pressure connection: G 1/4A, G 1/4, G1/4 female; 1/4NPT, 1/4NPT female, M20x1,5, R1/4 ISO7, PT1/ 2, 7/16-20 UNF
  • Connection: L-plug (valve), M12x1, cable, L-plug DIN 175-301-803C

Flush pressure transmitter

Flush Pressure Transmitter

Typ: PT-FR | ID: UF

technical features

  • Diaphragm: flush type
  • Range: 0...0,1 bar up to 0...600 bar
  • Output: 4...20 mA/0...20 mA / 0...10 V /
    0...5 V
  • Accuracy: 0,5% of span
    (option: 0,25% of span)
  • Temperature medium: -30...+100 °C / -30...+125 °C / -20...+150 °C
  • Material enclosure: CrNi steel
  • Pressure connection: G1/2 B / G1 B /
    Hygienic G1 B
  • Protection: IP65 up to IP68

Intrinsically safe level sensor GL- and Ex-approval

Intrinsically safe level sensor GL- and Ex-approval *'*

Typ: PT-HL | ID: UH

technical features

  • Ranges: 0...0,1 bar up to 0...10 bar
  • Output: 4...20 mA
  • Voltage supply: Current loop, 16...30VDC
  • Accuracy: 0,5% (0,25%)of span
  • Protection: IP68
  • Material enclosure: CrNi-Stahl, Hastelloy
  • Temperature range: -10...+85 °C
  • Connection: Cable

Conductive Level Sensor

Conductive Level Sensor

Typ: PT-HL-T-C | ID: UQ

technical features

  • Ranges: 0...0,1 bar up to 0...25 bar
  • Output: 4...20 mA
  • Accuracy: 20% of span (conductivity)
  • Temperature range: -10...+85 °C maximum with FEP-cable
  • Material casing: CrNi steel 316L
  • Electrical connection: Fixed cable, open end, 15 m (standard)
  • Protection: IP68
  • Pressure connection: CrNi: 1/2" B
  • Immersion depth: 300 m maximum with PUR-cable

Intrinsically safe level sensor | Ex-approval

Intrinsically safe level sensor | Ex-approval

Typ: PT-IL | ID: UE

technical features

  • Ranges: 0...0,1 bar up to 0...10 bar
  • Output: 4...20 mA
  • Accuracy: 0,5% of span (option: 0,25% of span)
  • Temperature range: -10...+85 °C
  • Material enclose: CrNi-Stahl (option: Hastelloy)
  • Electrical connection: cable
  • Protection: IP68
  • Pressure connection: CrNi: 1/2";       Hastelloy: 1/4" female
  • Immersion depth: 100 m maximum

Pressure transmitter for mobile hydraulic

Pressure transmitter for mobile hydraulic

type: PT-MH | ID: UB

technical features

  • Pressure: Relative
  • Ranges: 0...60 bar up to 0...600 bar
  • Output: 4...20 mA / 0...10 V / 1...5 V / 0,5...4,5 V
  • Accuracy: 1% of span / 2% of span
  • Temperature medium: -40...+125 °C
  • Material casing: plastic PTB
  • Pressure connection: G1/4A / M14x1,5 / 7/16-20UNF-2A / 1/4 NPT
  • Electrical connection: see technical data
  • Protection: at least IP67

Pressure transmitter SIL

Pressure transmitter SIL

type: PT-SIL | ID: UI

technical features


  • Ranges: 0...0,1 bar up to 0...1000 bar / -1...+24 bar
  • Output: Current / Voltage / Ratiometric
  • Supply: see data sheet
  • Accuracy: 0,5% (0,25%)of span
  • Degree of protection: IP67 (IP65 with valve plug)
  • Casing: 316Ti-steel
  • Process connection: G 1/2, G 1/4, 1/2 NPT, 1/4 NPT
  • Connection: See data sheet

Pressure transmitter standard

Pressure transmitter standard

type: PT-ST | ID: US

technical features

  • Pressure: relative or absolute types
  • Ranges from 0...0,1 bar up to 0...1000 bar
  • Output: 0(4)...20 mA, 0...10 V, 0...5 V
  • Supply voltage: current loop, 10 (14)...30VDC
  • Accuracy: 0,5% (0,25%)of span
  • Degree of protection: IP65 or IP67
  • Medium contact parts and case of stainless steel (CrNi)
  • Process connection G 1/2, G 1/4, 1/2 NPT, 1/4 NPT
  • Connection: L-plug (valve), M12x1, cable

Pressure transmitter standard

Pressure transmitter standard

type: PT-ST2 | ID: UZ

technical features

  • Pressure: Relative / Absolute / Vacuum & ±ranges
  • Ranges: 0...0,4 bar up to 0...1600 bar / -1...+59 bar
  • Output: Current / Voltage / Ratiometric
  • Supply: See data sheet
  • Accuracy: 0,5% (0,25%) of span
  • Degree of protection: IP67 (IP65 with valve plug)
  • Casing: 316Ti-steel
  • Process connection G 1/2, G 1/4, 1/2 NPT, 1/4 NPT
  • Connection: See data sheet

Digital indicator - universal input

digit height 14 mm

type: PU5 | 96 x 48

technical features

  • Display: 5 digits (-9999...99999)
  • Color: red
  • Operation: front panel keyboard
  • Input: universal input
  • Switching output: 2 / 4 relays, 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V
  • Interface: RS232, RS485
  • Supply: 24 VDC, 230 VAC
  • Digital input
  • Sensor supply: 10 VDC / 20 mA, 24 VDC / 50 mA

AC current/voltage - digit height 14mm

Digital indicator AC current/voltage
digit height 14mm

type: PVE4 | 72 x 36

technical features

  • Display: 4 digits (-999...9999)
  • Color: red
  • Operation: front panel keyboard
  • Input: 100 V, 300 V, 5 A
  • Switching output: 1 changeover contact 1 open collector (not with analog output)
  • Analog output: 0/4...20 mA, 0...10 V
  • Supply: 24 VDC, 115/230 VAC

PW5 - DMS - weighing technique - digit height 14 mm

Digital indicator straingauge / weighing technique

digit height 14 mm

type: PW5 straingauge weighing technique | 96 x 48

technical features

  • Anzeige: 5-stellig (-9999...99999)
  • Farbe: rot
  • Bedienung: frontseitig Folientastatur
  • Eingang: DMS 1 mV/V, 2 mV/V, 3,3 mV/V
  • Schaltausgang: Relais (Option)
  • Analogausgang: 1x 0/4...20 mA, 0...10 V
  • Schnittstelle: RS232, RS485
  • Geberspeisung: 10 VDC / 50 mA

Vehicle scale  - mobile pressure weighing system

Vehicle scale  - mobile pressure weighing system

Typ: PWS-XS | ID: ▒

technical features

  • Static weighing system
  • Suitable for all forklifts and loaders
  • Ease to use
  • Indication -t- oder -kg-
  • Tara function
  • Overload signal
  • Fast assembly
  • Weighing range: 0…1 t bis 0…100 t
  • Accuracy: ± 2,5% of max. lifting weight
  • Power supply: 10…30 VDC
  • Degree of protection: device unit IP66, full EMVprotection, sensor IP69K
  • Temperature range -20…+60°C

DC current/voltage - standard signal - digit height14mm

Digital indicator DC current/voltage (two sensor signals)
standard signal, digit height 14 mm

type: PZ5 | 96 x 48

technical features

  • Display: 5 digits (-9999...99999)
  • Color: red
  • Operation: front panel keyboard
  • Input: 2x 0/4...20 mA, 2x 0...10 V
  • Switching output: 2 / 4 relays, 250 VAC / 5 AAC, 30 VDC / 5 ADC
  • Analog output: 1x 0/4...20 mA, 0...10 V
  • Interface: RS232, RS485
  • Sensor supply: 10 VDC / 20 mA, 24 VDC / 50 mA
  • Supply: 24 VDC, 230 VAC
  • Digital input
  • Other: Linearization, min/max, flashing display

Wireless measurement technology: flexibility by wireless solutions

Besides wired sensor solutions Müller Industrie-Elektronik also offers a range of solutions for the wireless technology with radio frequencies which are largely trouble-free in relation to sources of interference and work with reliable industrial-grade transmission times and thus are suitable for use in rough industrial environments. If movable or distant plant components have to be controlled in the production process where wiring is technically not possible at all, or a temporary or additional installation of data transmission is necessary, in this case wireless transmission is the ideal and often - by the elimination of the wiring complexity - also cost efficient solution.





Digital Controller REG

Digital controller

type: REG | ID: KR

technical features

  • Input: thermocouple, resistance thermometer
  • Configuration: buttons on the front
  • Digital indicator: for set and actual values
  • Output: 3 relays, voltage-free changeover (250 VAC, 3(5)A
  • Alarm: load interruption, short circuit of the heating element (HB), input for current transformer
  • Control loop monitoring: (LBA alarm, at load interruption or sensor short circuit
  • Option: RS485

Climate sensor for rooms

Climate sensor for rooms

type: RKS | ID: RK

technical features

  • Temperature: Pt 100 (2-, 3-, 4-wire)
  • Accuracy: class A - B - 1/2 DIN
  • Measuring range: -40...+80 °C
  • Humidity: 0...100 %rF
  • Output humidity: 4...20 mA / 0...10 V / 2...10 V
  • Connection: via screwed cable gland to terminal screws
  • Enclosure: cast aluminium
  • Optional: transmitter 4...20 mA / 2...10 V / 0...10 V
  • Optional: Indicator (Input: 4...20 mA)

Feuchtigkeitssensor

Rod sensor P45-GD EX

Type: Rod sensor P45-GD EX

Features

  • Modular rod sensor P45-GD for pipes and tanks
  • Self-sufficient measuring device for exact water content/moisture deternation in the running process
  • Sensor for highest quality and safety in EX-protected production environments
  • For processing and refining a wide variety of emulsions and bulk solids
  • Different rod lengths
  • Application range up to 100 bar
  • Pressure sensor, sliding and interchangeable fittings optional

Room resistance thermometer

Room resistance thermometer

type: RWT | ID: RW

technical features

  • Measuring element: Pt 100, Pt 1000, (2-, 3-, 4-wire) and semiconductor
  • Connection: terminal screw via cable entry
  • Protecting tube: stainless steel 1.4571 or chemically stable synthetic
  • Measuring range: -50...+100°C
  • Accuracy: class A - B - 1/2 - 1/3 - 1/5 - 1/10 DIN
  • Optional: transmitter 4...20 mA / 2...10 V / 0...10 V
  • Optianal: transmitter II 1G EEx ia IIC T4 / T5 / T6
  • Enclosures: diecast aluminium / plastics

Safety control unit

Safety control unit SIL3|PLe 

type: SCU-DR | ID: CR

technical features

  • Compact-type Safe PLC suitable up to PL e (EN ISO 13849-1) or SIL3 (IEC 61508)
  • Safe digital inputs: 14 (inclusive 10 OSSD compatible)
  • Safe analog inputs: 2 (4 standard)
  • Safe relay outputs: 3 (6 standard)
  • Standard outputs: 2
  • Pulse outputs (clock): 2 (for cross short circuit detection)
  • Supply: 24 VDC
  • Operation temperature: 50 °C
  • Mounting: Top hat rail
  • Option: Interface modules
  • Protection: IP20
  • Control: Keys for Acknowledge, Start, Reset on front

Müller Industrie-Elektronik has years of experience, the technology and competence to develop sensors according to customised applications and special demands of the markets. We offer sensor solutions of the highest quality with a variety of electric interfaces, process connections and case forms. Certificates like ATEX/IEC-Ex, food licensings EHEDG and certificates for the shipbuilding according to DNV GL (Germanic Lloyd) are available for the sensors.

The modular sensor program for the industrial measuring and control technology:





Force transducer for serapid linklift series

Force transducer for serapid linklift series

type: SER-LO | ID: SL

technical features

  • Ranges: 20 / 30 / 70 / 100 kN
  • Output: 0,5...1 mV/V
  • Combined error: 2,5% of range
  • Protection: IP67
  • Material: stainless steel ARMCO 17-4PH
  • Safe overload: 150% of range
  • Operating temperature: -20...+70 °C
  • Connection: plug M12, 5-pole

Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum.



Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.
You are looking for a transmitter, amplifier, isolator or converter suitable for your application, which can process, convert, monitor and visualize your digital or analog signal values from industrial or process automation, such as: temperature, pressure, differential pressure, level, flow rate, strain gauge signal or weight?

Then Müller Industrie-Elektronik offers a manifold product portfolio in the field of analog and digital signal processing with the following functions:

Silo load cell

Silo load cell

type: SILO | ID: SI

technical features

  • Ranges from 1 t up to 75 t
  • Output 2mV/V
  • Supply voltage 10VDC
  • Accuracy below 0,05% of and scale value
  • Degree of protection IP68
  • Insensitive to off axis loads
  • Highly accurate and reliable
  • optioanally made of stainless steel

Low Profile Load Cell Assembly

Low Profile Load Cell Assembly

type: SILO-V | ID: LP

technical features

  • Ranges: 0...1000 up to 0...30000 kg
  • Output: 2,0 ±0,1% mV/V
  • Voltage supply: 10 VDC (standard)
  • Accuracy: < ±0,05% of range (combined error)
  • Output resistance: 700 ±5 Ω
  • Temperature range: -30...+70 °C (working)
  • Insulation resistance: > 5000 MΩ
  • Safe overload: 150% of range
  • Material load cell: stainless steel 1.4021 / AISI 420
  • Protection: IP68
  • Cable length: standard 10 m

Shear force transducer

Shear force transducer

type: SKA8C | ID: CA

technical features

  • Material: alloy steel / stainless steel / aluminium alloy
  • Rated load: 20...10000 kg
  • Output: 2 mV/V
  • Supply voltage: 10 VDC
  • Accuracy: +/- 0,02% FS
  • Degree of protection: IP66 / IP67
  • Connection: 3 m / 6 m cable, 4-wire shielded

Bolt-on strain sensing

Bolt-on strain sensing

type: SMLC | ID: SM

technical features

  • Full load output: 1 mV/V / 20 mV/V
  • Zero load output : +/-5% of range
  • Supply: 10 VDC (bridge)
  • Accuracy: 0,25% of range
  • Protection: IP65
  • Connection: cable, 3m, 4-wire shielded
  • Safe overload: 200% of nominal load
  • Operation temperature: -30...+70 °C

DMS - Brücken - Messverstärker SIL3 + PL"e"

Strain Gauge Bridge Amplifier SIL3 + PL"e"

type: SMM-DR | ID: ▒

technical features

  • Sensor input: 1x strain gauge full bridge (350 ohms)
  • Stain gauge sensitivity: up to 4 mV/V
  • Bridge supply: 5 VDC
  • Analog output: 2x 4...20 mA
  • Voltage supply: 24 VDC +/-10%
  • Accuracy: 5% deviation channel A / channel B
  • Protection: IP20
  • Diagnostic input: Test pulse 24 VDC
  • Enclosure: DR22,5 (117,2x22,5x113,6)
  • Certificate: SIL 3, Performance Level "e"

Strain Gauge Bridge Amplifier SIL1 + PL"c"

Strain Gauge Bridge Amplifier SIL1 + PL"c"

type: SMM-DR-SIL1 | ID: RA

technical features

  • Sensor input: 1x strain gauge full bridge (350 ohms)
  • Stain gauge sensitivity: up to 4 mV/V
  • Sensor supply: 1,25…3 VDC
  • Analog output: 4…20 mA / 0…10 V / 0,5…10,5 V / 2…10 V
  • Voltage supply: 18…35VDC
  • Accuracy: see technical data
  • Protection: IP20
  • Vibration resistance: none
  • Switch output: max. 30 VAC / VDC, at max. 500 mA
  • Enclosure: DR22,5 (117,2x22,5x113,6)
  • Certificate: SIL 1, Performance Level "c"

Digital strain gauge amplifier

Strain Gauge Bridge Amplifier SIL3 + PL"e"

type: SMM-HD | ID: ▒

technical features

  • Sensor input: 1x or 2x strain gauge full bridge (350 ohms)
  • Stain gauge sensitivity: up to 4 mV/V
  • Bridge supply: 5 VDC
  • Analog output: 2x 4...20 mA for each strain gauge
  • Voltage supply: 24 VDC +/-10%
  • Accuracy: 5% deviation channel A / channel B
  • Protection: IP65
  • Diagnostic input: Test pulse 24 VDC
  • Enclosure: U-CASE2 (162,2 x 92,2 (101,1) x 60,2 mm)
  • Certificate: SIL 3, Performance Level "e"

Strain Gauge Bridge Amplifier SIL1 + PL"c"

Strain Gauge Bridge Amplifier SIL1 + PL"c"

type: SMM-HD-SIL1 | ID: QX

technical features

  • Sensor input: 1x strain gauge full bridge (350 O)
  • Strain gauge sensitivity: up to 4 mV/V
  • Sensor supply: 1,25...3 VDC
  • Analog output: 4…20 mA / 0…10 V / 0,5…10,5 V / 2…10 V
  • Voltage supply: 9…35 VDC
  • Accuracy: see technical data
  • Protection class: IP65
  • Vibration resistance: none
  • Switch output: max. 30 VAC / VDC, at max. 500 mA
  • Casing: U-CASE 2 (162,2 x 92,2 (101,1) x 60,2 mm)
  • Approvals: SIL1 and Performance level c

Strain Gauge Bridge Amplifier SIL1 + PL"c"

Strain Gauge Bridge Amplifier SIL1 + PL"c" + IO-Link

type: SMM-HD-SIL1 | ID: [?]

technical features

  • […]
  • Sensor input: 1x strain gauge full bridge (350 O)
  • Strain gauge sensitivity: up to 4 mV/V
  • Sensor supply: 1,25...3 VDC
  • Analog output: 4…20 mA / 0…10 V / 0,5…10,5 V / 2…10 V
  • Voltage supply: 9…35 VDC
  • Accuracy: see technical data
  • Protection class: IP65
  • Vibration resistance: none
  • Switch output: max. 30 VAC / VDC, at max. 500 mA
  • Casing: U-CASE 2 (162,2 x 92,2 (101,1) x 60,2 mm)
  • Approvals: SIL1 and Performance level c

Transmitter standard signal for DIN rail

Transmitter standard signal for DIN rail

type: SP-DR | ID: ▒

technical features

  • Input current: 0...20 mA - Input Voltage: 0...20 V
  • Input resistance; 0...4000 ohms
  • Output: 4...20 mA, galvanical insulation
  • Supply: 6...32 VDC out of current loop
  • Transmission error: 0,1% FS
  • Configuration: RFID-Programmer
  • Connection: Terminal screws
  • Protection: IP20
  • Dimensions: 18xs90x64 mm
  • Enclosure: Synthetics black

Load cell

Load cell

type: SPW6E | ID: CS

technical features

  • Rated load 50kg up to 300kg
  • Output 2mV/V
  • Supply voltage 10VDC
  • Accuracy +/- 0,02% of end scale value
  • Degree of protection IP67
  • Recommended plattform size 400 x 400mm
  • High resistance to lateral loads
  • Highly accurate and reliable

Flow controller

Flow controller

type: STRW | ID: SW

technical features

  • Regristration range from 1...150cm/s up to 2...30m/s
  • Output as NPN - transistor, 24VDC / 400mA
  • Integrated electronics
  • One-piece stainless steel, resistance to pressure up to 100bar
  • Balancing display 6 LED (red, yellow, green)
  • Degree of protection IP67

Standard temperature sensor

Standard temperature sensor

Typ: STS | ID: ▒

technical features

  • Sensor element: RTD Pt100, 4-wire, Class A
  • Schutz: body of case completely potted
  • Material: stainless steel 1.4571
  • Process connection: compression fitting 1/4" and 1/2"
  • Output: RTD Pt100 on connection plug
  • Electrical connection: M12x1, 4-pole
  • Temperature medium: -20…150 °C
  • System pressure:10 bar
  • Protection: IP67

Rail temperature sensor

Rail temperature sensor

type: STSBA | ID: ST

technical features

  • Measurement element: Pt100, 4-wire, Class A
  • Resolution: 0,1 °C
  • Configuration: with PC, MS - Windows 3.11 or higher
  • Operating surface "DTM - Control"
  • Analog output 4...20 mA, invertable, 2-wire technics
  • Temperature linear output
  • Galvanic insulation
  • Special steel case completely potted

Digital measuring amplifier for strain gauge

Digital measuring amplifier for strain gauge

type: SU-DX | ID: DL

technical features

  • Input sensivity 01 to 5 mV/V
  • Programmable via RS232 interface
  • Analog output 4...20 mA and 0...10 V
  • Supply voltage 24 VDC +/- 30%
  • Combined error 0,2% FS
  • Resolution 12 / 14 / 15 / 16 bit
  • Enclosure plastics
  • Degree of protection IP 67

Limit value switch for standard signals

Limit value switch for standard signals

type: SU-LX | ID: NU

technical features

  • Input 0...10 V, 0(4)...20 mA
  • Relay with change-over contactt
  • Indication of status of relay
  • Switching when above or below limit value
  • Supply 24 VDC +/-20%, optional 115/230 VAC
  • Measuring fault less than 0,5% FS, temperature coefficient 50 ppm/K
  • Easy mounting with top hat rail case
  • Degree of protection IP20
  • Adjustment of limit value and hysteresis

AC/DC - switch controller

AC/DC - switch controller

Type: SU-PX | ID: PS

technical features

  • Input: 94 .. 264 VAC
  • Output: 5/12/15/21/24 VDC
  • Efficiency of: 77 .. 87%
  • Installation: DIN rail
  • Overload Protection: continuous short circuit proof
  • Over-temperature protection: yes
  • Power failure buffering: 40 ms
  • Nominal voltage Tolerance: +2% / -1%

Signal transducer for potentiometer

Signal transducer for potentiometer

type: SU-RX | ID: PU

technical features

  • Input pot 0...400 Ohm up to 0...100 kOhm
  • Analog output 4...20 mA (0...10 V)
  • Supply 24 VDC +/-20%, 12 VDC, 115VAC, 230 VAC
  • Zero drift below 0,2%/10K, gain drift below 0,1%/10K
  • Easy mounting with top hat rail case
  • Degree of protection IP20
  • Adjustment of zero and gain

Accessories: cooling element for pressure sensors

Accessories: cooling element for pressure sensors

type: SZ-KS1 | ID: ▒

technical features

  • Use: at increased medium temperatures
  • Temperature Medium: up to 200 °C
  • Process connection: G 1/2 B (EN 837)
  • Sensor connection: G 1/2 B female (EN 837)
  • Pressure resistance: up 600 bar
  • Sealing: necessary (according EN 837)
  • Material: CrNi-Steel 1.4571
  • Pressure port: 3,5 mm
  • Weight: ca. 230 g

Thermocouple cable sensor

Thermocouple cable sensor

type: TE-K1 | ID: KT

technical features

  • Sensor: 1x type J (Fe-CuNi) / 1x type K (NiCr-Ni)
  • Protective sheathing: 1.4571, diameter: 4 / 5 / 6 mm
  • Nominal length: 30 (d = 4) / 50 (d=4, d = 5) / 46 (d = 6) / 70 (d = 6) mm
  • Option: other length
  • Cable length: 2000 mm / Option: other length
  • Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
  • Antikink: heat shrinkable sleeve / spring / without
  • Connection: open ends / TE-plug

Thermocouple cable with GL-approval sensor

Thermocouple cable sensor with GL-approval

type: TE-K1G | ID: KT

technical features

  • Sensor: 1x type J (Fe-CuNi) / 1x type K (NiCr-Ni)
  • Protective sheathing: 1.4571, diameter: 4 / 5 / 6 mm
  • Nominal length: 30 (d = 4) / 50 (d=4, d = 5) / 46 (d = 6) / 70 (d = 6) mm
  • Option: other length
  • Cable length: 2000 mm / Option: other length
  • Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
  • Antikink: heat shrinkable sleeve / spring / without
  • Connection: open ends / TE-plug

Mineral insulated thermocouple

Mineral insulated thermocouple

type: TE-MK1 | ID: KB

technical features

  • Sensor: 1x type J (Fe-CuNi) / 1x type K (NiCr-Ni)
  • Protective sheathing: 2.4816 (Inconel 600)
  • Sleeve joint: 1.4571 (316Ti)
  • Diameter sheath: 1,5 / 3 / 4,5 / 6 mm
  • Nominal length: 100 mm / Option: other length
  • Cable length: 2000 mm / Option: other length
  • Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
  • Connection: open ends / TE-plug

Mineral insulated thermocouple with GL-approval

Mineral insulated thermocouple with GL-approval

type: TE-MK1G | ID: KB

technical features

  • Sensor: 1x type J (Fe-CuNi) / 1x type K (NiCr-Ni)
  • Protective sheathing: 2.4816 (Inconel 600)
  • Sleeve joint: 1.4571 (316Ti)
  • Diameter sheath: 1,9 / 3 / 4,5 / 6 mm
  • Nominal length: 100 mm / Option: other length
  • Cable length: 2000 mm / Option: other length
  • Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
  • Connection: open ends / TE-plug

Thermocouple with connection head B

Thermocouple with connection head B

type: TE-MR1 | ID: KC

technical features

  • Sensor: 1x type J (Fe-CuNi) / 1x type K (NiCr-Ni) / 2x type J / 2x type K
  • Protective sheathing: stainless steel 1.4571 (standard element) 2.4816 (M.I. element)
  • Diameter sheath: 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 15 mm (standard) 1,5 / 3 / 4,5 / 6 mm (M.I. element)
  • Nominal length: 50 / 100 / 160 / 200 / 250 / 400 / 600 / 1000 mm
  • Process connection: 1/4" / 3/8" / 1/2" / 1" / 1/4NPT / 3/8NPT / 1/2NPT
  • Terminal head: aluminium IP 54

Thermocouple with connection head B and GL-approval

Thermocouple with connection head B with GL-approval

type: TE-MR1G | ID: KC

technical features

  • Sensor: 1x type J (Fe-CuNi) / 1x type K (NiCr-Ni) / 2x type J / 2x type K
  • Protective sheathing: stainless steel 1.4571 (standard element) 2.4816 (M.I. element)
  • Diameter sheath: 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 15 mm (standard) 1,5 / 3 / 4,5 / 6 mm (M.I. element)
  • Nominal length: 50 / 100 / 160 / 200 / 250 / 400 / 600 / 1000 mm
  • Process connection: 1/4" / 3/8" / 1/2" / 1" / 1/4NPT / 3/8NPT / 1/2NPT
  • Terminal head: aluminium IP 54

Clamp thermometer testo 115i

testo 115i – Clamp thermometer operated by smartphone

Type: Smart Probe testo 115i

technical features

Smart Probe testo 115i – Clamp thermometer operated by smartphone:
  • For servicing air conditioning and refrigeration systems and measuring flow and return temperatures
  • Convenient temperature measurement on refrigeration, air conditioning and heating systems – thanks to wireless connection to your smartphone or tablet
  • Fast identification of temperature changes by graphic progression display
  • Measurement data analyzed and sent via testo Smart Probes App
  • Problem-free application at measuring points that are a long distance apart thanks to Bluetooth® range up to 100 m
  • Combined with a smartphone or tablet, the testo 115i clamp thermometer is the ideal temperature measuring instrument for carrying out servicing and troubleshooting on refrigeration, air conditioning and heating systems, as well as for installing them. It can also be used to measure flow and return temperatures

Temperature Data-Logger

Temperature Data-Logger

type: TESTO 175-Serie

technical features

The Series 175 are compact data logger for temperature measurement.

Product benefits 175-T1
  • 1-channel with internal temperature sensor
  • Display of current value, last storing,
  • Min / max values​​, limits number deviations
  • Non-volatile data memory
  • Documentation via infrared interface
  • Accessories
Product benefits 175-T2
  • 2-channel temperature sensor with 1 internal and 1 external sensor input
  • Display of current value,
  • Last memory, min / max values​​, limits number of deviations
  • Collect data in the device evaluation on a PC
  • Various external temperature sensor
  • Accessories
Product benefits 175-T3
  • 2-channel with 2 sensor inputs external
  • Especially suitable for high and low temperatures,
  • Reading the data by pressing a button
  • Data analysis in table / graph
  • Alarm, transmission of exceedances
  • Interface for data transfer
  • Various external temperature sensor
  • Accessories

Data logger Temperature

Data logger Temperature

type: testo 175-Serie

Technische Features

Die Serie 175 offeriert kompakte Datenlogger für die Temperaturmessung.

Product benefits 175-T1 / 175-T2:
  • High data security
  • Large, easily legible display
  • Measurement data memory for 1 million measurement values
  • Up to 3 years‘ battery life
  • Data transfer via USB cable or SD card
  • Complies with DIN EN 12830


Product benefits 175-T3:

  • Two external sensor connections (thermocouple Type T and Type K)

Data logger Temperature

Data logger Temperature

type: testo 176t

technical features

  • High data security
  • Thermocouples Type T, Type K, Type J connectable
  • Simultaneous measurement at four sites
  • Measurement data memory for 2 million measurement values
  • Up to 8 years‘ battery life
  • Data transfer via USB cable or SD card
  • In a metal housing for more robustness (testo 176 T3) or with a large display for a clearer overview (testo 176 T4)

Temperature Data-Logger for professionals

Temperature Data-Logger for professionals

type: testo 177-Serie

technical features

The 177 Series are compact professional data logger for temperature measurement.

Product benefits 177-T1
  • 1-channel with internal temperature sensor
  • A maximum of 48,000 measured values
  • Documentation via infrared interface
  • Available with data collector evaluation on a PC
  • Without display
  • Accessories
Product benefits 177-T2
  • 1-channel with internal temperature sensor
  • Large display for latest value, last saving, min / max values​​, limits number of deviations
  • Non-volatile data memory
  • Documentation via infrared interface
  • Collect data in the device evaluation on a PC
  • Accessories
Product benefits 177-T3
  • 3-channel temperature sensor with 1 internal and 2 external sensor input
  • Connection of a door contact
  • Read out data without interrupting the measurement series
  • Data analysis in table / graph
  • Complete documentation for years
  • Recording of up to 48,000 measured values;
  • Various external temperature sensor
  • Accessories
Product benefits 177-T4
  • 4-channel with 4 external sensor input
  • Especially suitable for high and low temperatures
  • Read out data without interrupting the measurement series
  • Data analysis in table / graph
  • Collect data in the device evaluation on a PC
  • Records up to 48,000 readings;
  • Various external temperature sensor
  • Accessories

testo 400 Air flow kit with hot wire probe

Air flow kit with hot wire probe

type: testo 400 Set

technical features

Kit for standard-compliant volume flow measurement in ducts, at outlets and on filters

Product benefits
  • Determination of volume flow in ducts using grid measurement in accordance with EN ISO 12599 and ASHRAE 111
  • Determination of volume flow at outlets or on individual components through measurement of the reference pressure and input of the manufacturer-specific K factor
  • Complete measurement with full documentation directly on site with the customer or further analysis with the measurement data management and analysis software testo DataControl
  • Parallel measurement of flow, differential pressure, humidity and temperature
  • Integrated absolute pressure sensor, high-precision and location-independent differential pressure sensor; external high-precision humidity/temperature probe head

testo 400 Air flow kitwith 16 mm vane probe

Air flow kitwith 16 mm vane probe

type: testo 400 Set

technical features

Kit for standard-compliant measurement in ducts, at outlets and on filters

Product benefits
  • Determination of volume flow in ducts using grid measurement in accordance with EN ISO 12599 and ASHRAE 111
  • Determination of volume flow at outlets or on individual components through measurement of the reference pressure and input of the manufacturer-specific K factor
  • Complete measurement with full documentation directly on site with the customer or further analysis with the measurement data management and analysis software testo DataControl
  • Parallel measurement of flow, differential pressure, humidity and temperature
  • Integrated absolute pressure sensor, high-precision and location-independent differential pressure sensor; external high-precision humidity/temperature probe head

testo 400 IAQ and comfort kit with tripod

IAQ and comfort kit with tripod

type: testo 400 Set

technical features

Kit for standard-compliant measurement of indoor air quality and comfort level

Product benefits
  • Determination of the PMV and PPD comfort level parameters in accordance with EN ISO 7730 and ASHRAE 55
  • Determination of the draught and degree of turbulence comfort level parameters in accordance with EN ISO 7730 and ASHRAE 55
  • Indoor air quality: Determination of CO₂ concentration, humidity, air temperature and degree of turbulence in workplaces, including long-term measurement
  • Complete measurement with full documentation directly on site with the customer or further analysis with the PC software testo DataControl
  • Globe thermometer for measuring radiant heat, measuring tripod for comfort level measurement to ensure standardcompliant positioning of probes

testo 400 – Universal IAQ instrument

testo 400 Universal IAQ instrument

type: testo 400

technical features

testo 400 – the multitasker for IAQ professionals

Product benefits
  • Measures all IAQ-related parameters: Flow, temperature, humidity, pressure, illuminance, radiant heat, turbulence, CO₂ and CO
  • High-precision, location-independent and integrated differential pressure sensor
  • High-quality digital probes and an intelligent calibration concept
  • Document measuring values directly on the customer's site and send them by e-mail, or further analyze them using the testo DataControl PC software
  • Smart and intuitive measurement programs:
    - HVAC grid measurement in accordance with EN ISO 12599 and ASHRAE 111
    - PMV/PPD in accordance with EN ISO 7730 and ASHRAE 55
    - Draught and degree of turbulence in accordance with EN ISO 7730 and ASHRAE 55
    - WBGT measurement in line with DIN 33403 and EN ISO 7243, NET measurement in accordance with DIN 33403

Thermal anemometer testo 405i

testo 405i – Thermal anemometer operated by smartphone

Type: Smart Probe testo 405i

technical features

Smart Probe testo 405i – Thermal anemometer operated by smartphone:
  • For the measurement of air flow velocities, temperatures and volume flows in ventilation ducts
  • For measuring volume flow, air velocity and temperature
  • Simple configuration of the dimension and geometry of the duct cross-section for determining the volume flow
  • Convenient for working in ventilation ducts thanks to its telescopic tube, which can be extended up to 400 mm
  • Really convenient to operate thanks to the testo Smart Probes App (e.g. easy viewing of readings, measurement data trend, log function)
  • With the testo 405i hot wire anemometer, you can measure air velocities, temperatures and volume flows. Via Bluetooth, the readings are transmitted wirelessly straight to the testo Smart Probes App on your smartphone or tablet. You can view the values conveniently and use numerous intelligent features

Vane anemometer testo 410i

testo 410i – Vane anemometer operated by smartphone

Type: Smart Probe testo 410i

technical features

Smart Probe testo 410i – Vane anemometer operated by smartphone:
  • For air flow velocities, temperatures and volume flows at air outlets
  • Measurement of air velocity, volume flow and temperature
  • Display of the volume flow of multiple outlets in order to adjust systems
  • Easy parametrization of the outlet (dimension and geometry)
  • Convenient viewing of readings on a smartphone/tablet with the testo Smart Probes App
  • Professional measuring technology in a small format: the compact testo 410i vane anemometer with smartphone operation measures the volume flow, air velocity and temperature at air outlets quickly and reliably. The testo Smart Probes App enables readings to be viewed conveniently and offers intelligent additional functions

Multifunction meter for climate, ventilation, indoor air quality

Multifunction meter for climate, ventilation, indoor air quality

type: testo 435-Serie

technical features

A device for all measurements around the air conditioning: m3 / s, m / s, CO2,% RH, ° C, hPa and Lux. The choices are several variations, so that according to the application the right instrument can be selected.

Product benefits
  • Wide range of probes: IAQ probe to assess Indoor Air Quality (on CO2, Air temperature, air humidity and absolute pressure) / Thermal probes with integrated Temperature and humidity measurement / vane and hot wire / wireless probes for temperature
  • Easy operation with user profiles - expression on Testo report printer
  • Degree of protection IP54
additionally at 435-2
  • Data memory
  • PC software
  • USB data transfer cable
additionally at 435-3
  • With integrated differential pressure measurement

additionally at 435-4
  • Data memory
  • PC software
  • USB data transfer cable
  • With integrated differential pressure measurement
Accessories for Series 435
  • Flow sensors
  • Measuring funnel
  • Absolute pressure sensor
  • Air probe
  • Surface temperature measurement
  • Immersion-/penetration probes
  • Wireless Sensor
  • Optional Parts

testo 440 Air velocity & IAQ measuring instruments

testo 440 Air velocity & IAQ measuring instruments

type: testo 440

technical features

testo 440 air velocity & IAQ measuring instrument
testo 440 dP air velocity & IAQ measuring instrument incl. differential pressure

Product benefits
  • Intuitive: clearly structured measurement menus for the most important applications stored on the instrument
  • Wireless: Bluetooth probes for greater measuring convenience and a reduced tangle of cables in the case
  • Space-saving: a universal handle for all probes
  • Clear overview: parallel display of 3 measuring values; configuration and results at a glance
  • Reliable: internal memory for up to 7500 measurement protocols, USB interface for data export and optional printout of measuring values

Differential pressure measuring instrument testo 510i

testo 510i – Differential pressure measuring instrument operated by smartphone

Type: Smart Probe testo 510i

technical features

Smart Probe testo 510i – Differential pressure measuring instrument operated by smartphone:
  • Measures differential pressure, air flow velocity and volume flow
  • Measurement of gas flow and static pressure
  • Measurement menu for pressure drop test including alerts
  • Simple configuration and determination of volume flow with Pitot tube
  • Magnetic holder for easy attachment
  • Handy and intelligent: the compact testo 510i differential pressure measuring instrument featuring professional measuring technology and smartphone operation for measuring differential pressure, air flow velocity and volume flow. Readings can be viewed conveniently on your smartphone/tablet via the testo Smart Probes App and emailed directly

High pressure measuring instrument testo 549i

testo 549i – High pressure measuring instrument operated by smartphone

Type: Smart Probe testo 549i

technical features

Smart Probe testo 549i – High pressure measuring instrument operated by smartphone:
  • For service and troubleshooting on air conditioning and refrigeration systems, as well as for installing them
  • Measurement of high and low pressure
  • Low refrigerant loss – since no hoses are required for measurements
  • Measurement data displayed in the form of a graph or table, and sent via testo Smart Probes App
  • Problem-free application at measuring points that are a long distance apart thanks to Bluetooth® range up to 100 m
  • The professional and compact testo 549i high-pressure gauge can be controlled via the testo Smart Probes App using your smartphone or tablet, and is ideal for carrying out servicing and troubleshooting on air conditioning and refrigeration systems. The App also enables evaporation and condensation temperatures to be calculated automatically

Thermohygrometer testo 605i

testo 605i – Thermohygrometer operated by smartphone

Type: Smart Probe testo 605i

technical features

Smart Probe testo 605i – Thermohygrometer operated by smartphone:
  • For the measurement of air temperature and humidity in rooms and ducts
  • Measurement of air humidity and temperature in rooms and ducts
  • Automatic calculation of the dew point and wet bulb temperature via testo Smart Probes App
  • Measurement data analyzed and sent via testo Smart Probes App
  • Problem-free application at measuring points that are a long distance apart thanks to Bluetooth® range up to 100 m
  • The compact testo 605i temperature and humidity measuring instrument with bendable probe head features professional measuring technology in an intelligent format: it can be used in conjunction with a smartphone/tablet and the testo Smart Probes App to reliably measure air temperature and humidity in rooms and ducts

humidity and temperature measurement

Humidity and temperature measurement

type: testo 635-1 / -2

technical features

The universal measuring device for measuring humidity, value, material equilibrium moisture and for measuring pressure dewpoint in compressed air system.

product advantages

  • Connection of 3 wireless probes - expression on Testo report printer
  • Indication of dew point, minimum-, maximum- and average-values ​​- Backlit display
  • Degree of protection IP54

additionally at 635-2

  • Measurement memory
  • PC software
  • USB data transfer cable

accessories for 635-1 / -2

  • Humidity Sensor
  • Pressure dewpoint probe
  • Absolute pressure sensor
  • Air probe
  • Surface probe
  • Wireless probes (option)
  • Optional accessories

Clime humidity transmitter

Humidity transmitter

type: testo 6621

technical features

  • Accuracy of ±2.5 % RH
  • Wall or duct version, option of 2-line LCD display
  • Commissioning and maintenance through external interface (mini-DIN) and Testo P2A software saves time
  • Testo humidity sensor with long-term stability
  • High-quality design
  • Optimum calibration concept with adjustment of entire signal chain, including analog adjustment, without dismantling the transmitter
  • 1-point adjustment can be performed on-site easily and quickly using t400 or t650
  •  2-point adjustment using Testo P2A software
  •  Parameterizing, adjusting and analyzing software (P2A) for setting up, adjusting and analyzing the transmitter
  • Parameterization of unit and scale
  • Adjustment (1-point, 2-point, analog adjustment)
  • Reset to factory settings
  • Testing of analog outputs
  • Requesting of max./min. values
  • Parameterization and adjustment history (all activities of the P2A software are registered in the PC)
  • Serial number and firmware version can be called up
  • 2 analog outputs (% RH & °C or °F)

humidity transmitter

Humidity transmitter 6651

type: testo 6651

technical features

The humidity transmitter for critical air conditions with digital, replaceable probe.
  • Accuracy up to ±1.7 % RH
  • Digital probe of the 6600 instruments: can be calibrated and exchanged and is equipped with its own order number
  • Wall, duct and cable probes, can be configured upon customer request and are heat resistant up to +120 °C
  • Highest availability by means of early warnings, e.g. in the event of sensor failure, condensation etc. (preventative maintenance)
  • Different assembly variants:
  • Wall-mounted version
  • Duct version
  • Probe version

High-Precision Temperature Measurement

High-Precision Temperature Measurement

type: testo 735-1 / -2

technical features

Very accurate temperature measuring devices with connection of up to 6 temperature sensors.

Product benefits
  • Connection of: 1x Pt100, thermocouple 2x, 3x wireless probe
  • System accuracy up to 0.05 ° C
  • Printout on Testo report printer
  • Cyclical printing of measured values
  • PC software for analysis and documentation
  • Display, saves and prints minimum-, maximum-, and average values ​​of difference
  • Audible alarm when limit exceeded
  • IP65 Protection
  • Precise over entire measurement range
Additionally at 735-2
  • Instrument memory for up to 10000 readings
  • Recording of temperature variation
  • PC evaluation graphic / table
  • Creating a user profile
  • USB cable and software
Accessories for 735-1 and 735-2
  • Laboratory sensor
  • Air probe
  • Surface probe
  • Diving and penetration
  • Thermocouples
  • Food probe
  • Various wireless sensors
  • Additional accessories

Infrared thermometer testo 805i

testo 805i – Infrared thermometer operated by smartphone

Type: Smart Probe testo 805i

technical features

Smart Probe testo 805i – Infrared thermometer operated by smartphone:
  • For the non-contact measurement of wall, fuse and component temperatures of air conditioning systems
  • Non-contact infrared measurement of surface temperature
  • Easy selection of emission level via stored materials list
  • Highly visible marking of the measuring spot thanks to 8-point laser
  • Image documentation with readings and measuring spot marking
  • Carry out non-contact and App-controlled measurement of wall temperatures, as well as fuse and component temperatures in air conditioning systems: with the professional testo 805i infrared thermometer with 8-point laser circle for highly visible measuring spot marking

Non-Contact Temperature Measurement

Non-Contact Temperature Measurement

type: testo 830-Serie

technical features

With the Series 830 non-contact temperature measurement from a distance is possible. The respective measuring point is marked on one-or two-point laser.

Product Benefits 830-series
  • Adjustable limit values ​​with alarm function
  • Display of current value and Hold value
  • Emissivity adjustable
  • 2 measurements per second
  • Accessories
additional 830-T1
  • 10: 1 optics
  • One-point laser marking
additional 830-T2
  • 12: 1 optics
  • Two-point laser marking
  • Sensor external connection
  • Emissivity determination (external sensor)
additional 830-T3
  • 2.5: 1 optics
  • Two-point laser marking
  • Connection of external contact Temperaturühler
additional 830-T4
  • 30: 1 optics
  • Two-point laser marking
  • connection of external sensors
  • Emissivity determination (external sensor)

Thermal imager 883

testo 883 Thermal imager

type: testo 883

technical features

  • Your helping hand: The testo 883 thermal imager
  • Best image quality: IR resolution of 320 x 240 pixels (with SuperResolution 640 x 480 pixels); NETD < 40 mK
  • Helpful features: testo SiteRecognition intelligent image management and testo ScaleAssist automatic contrast adjustment
  • Extensive analysis and documentation: With the intuitive professional software testo IRSoft
  • Full control: Manual focus and interchangeable lenses
  • Wireless transmission: Integrate readings from clamp meter or humidity probe directly into the thermal image

Thermometer testo 905i

testo 905i – Thermometer operated by smartphone

Type: Smart Probe testo 905i

technical features

Smart Probe testo 905i – Thermometer operated by smartphone:
  • Measures ambient temperatures and temperatures in ducts and at air outlets
  • Rapid detection of temperature change via graphical progress display
  • Measuring range -50 to +150 °C
  • Measurement data analyzed and sent via testo Smart Probes App
  • Check ambient temperatures and temperatures in ducts and at air outlets quickly, easily and professionally: with the testo 905i thermometer, which is optimized for your smartphone, nothing could be simpler

Thermometer testo 915i

testo 915i – Thermometer operated with your smartphone

type: Smart Probe testo 915i

technical features

Smart Probe testo 915i – wireless Smart Probe with plug-in measurement probes

  • Smart Probe with wireless temperature measurement in the most diverse applications, thanks to large selection of probes and compatibility with common Type K thermocouple probes
  • Secure attachment of the Testo measurement probe thanks to innovative locking mechanism on the handle
  • Easy operation, evaluation and documentation with cost-free testo Smart App
  • Automatic Bluetooth® connection to smartphones, tablets or Testo measuring instruments (.g. testo 400, testo 550s) with a range of up to 100 m
  • High measurement accuracy thanks to system calibration ex-works

temperature measurement

temperature measurement

type: testo 925 / 922

technical features

Universal temperature measuring instruments.

Product benefits
  • On-site printout on Testo report printer
  • Display minimum-, maximum- values
  • Backlit display
  • Hold button (value hold)
  • Wearing protective cover
Additionally at 925
  • 1-channel measuring instrument
  • Optional wireless probe
  • Audible alarm when limit exceeded
Additionally at 922
  • 2-channel measuring instrument
  • Optional wireless probe
  • Display difference temperature
  • Cyclical printing of measured values
Accessories for 925 and 922
  • Air Sensor
  • Surface probe
  • diving and penetration
  • Thermocouples
  • Various wireless sensors
  • Additional accessories

Smart Probes Heating kit

Smart Probes - Heating kit

Content:
clamp thermometer testo 115i |
differential pressure measuring instrument testo 510i |
infrared thermometer testo 805i

Technical Features

  • Smart Probes Heating kit:
  • All necessary instruments for non-contact temperature measurement and the measurement of flow and return temperature, as well as gas flow pressure
  • With the heating set, you measure and check all temperatures and pressures in a heating system.
  • It is ideal for important measuring tasks performed by heating engineers
  • Measurement data analyzed and sent via testo Smart Probes App
  • Measurement data analysis as a table or graph
  • including testo Smart Case for transport

Smart Probes HVAC ultimate kit

Smart Probes - HVAC ultimate kit

Content:
2 x Clamp thermometer testo 115i
2 x High-pressure gauge testo 549i
2 x Thermohygrometer testo 605i
1 x Thermometer testo 905i
1 x Infrared thermometer testo 805i
1 x Thermal anemometer testo 405i
1 x Vane anemometer testo 410i
1 x Differential pressure measuring instrument testo 510i
1 x testo HVAC softcase

technical features

Smart Probes HVAC/R Ultimate kit:
  • For all measurements involving heating, air-conditioning, refrigeration and ventilation systems
  • All Smart Probes for temperature, pressure, humidity and flow in one kit
  • Display of measurement data progression as a graph or table
  • Transmission and analysis of measurement data via testo Smart Probes App

Smart Probes Mould kit

Smart Probes - Mould kit

Content:
1 x Thermohygrometer testo 605i
1 x Infrared thermometer testo 805i
1 x testo Smart Case (Climate)

technical features

Smart Probes Mould kit:
  • Identify mould risk at an early stage using the testo Smart Probes App
  • Measuring point marking with laser function
  • Display and evaluation of the mould risk with the aid of traffic light colours
  • Transmission and analysis of measurement data including photo documentation via testo Smart Probes App
  • Measurement of air humidity and temperature in rooms and ducts
  • Automatic calculation of the dew point and wet bulb temperature via testo Smart Probes App
  • Non-contact infrared measurement of surface temperature
  • Easy selection of emission level via stored materials list

Smart Probes Refrigeration kit

Smart Probes - Refrigeration kit

Content:
2 x high pressure measuring instrument testo 549i |
2 x clamp thermometer testo 115i

technical features

Smart Probes Refrigeration set:
  • Compact pro measuring instrument from the Testo Smart Probes series for use with smartphones/tablets
  • Application-specific menus: Target superheating, superheating and sub-cooling
  • All necessary measuring instruments for refrigeration applications in one set
  • Fast and easy installation at a pressure connection or the temperature measurement location
  • Low refrigerant loss thanks to hoseless application
  • Measurement data analyzed and sent via testo Smart Probes App
  • including testo Smart Case for transport

Smart Probes VAC kit

Smart Probes - VAC kit

Content:
thermal anemometer testo 405i 
van anemometer testo 410i
thermohygrometer testo 605i
infrared thermometer testo 805i

technical features

Smart Probes VAC kit:
  • For the measurement of air and surface temperature, humidity, air flow velocity and volume flow
  • Application-specific menus: Volume flow measurements in ducts and at outlets, identification of mould danger, easy image documentation incl. IR temperature measurement value and measurement spot marking; determination of the refrigeration/heating performance
  • Easy parameterization of the outlet/duct cross-section
  • Fast image documentation with IR temperature measurement values and measurement spot marking
  • Measurement data analyzed and sent via testo Smart Probes App
  • including testo Smart Case for transport

Thermal imager 865

testo Thermal imager 865

type: testo 865

technical features

  • Infrared resolution 160 x 120 pixels
  • with SuperResolution technology to 320 x 240 pixels
  • Automatic recognition of hot-cold spots

Thermal imager 868

testo Thermal imager 868

type: testo 868

technical features

  • Infrared resolution 160 x 120 pixels
  • with testo SuperResolution technology 320 x 240 pixels
  • With testo Thermography App
  • Integrated digital camera
  • Automatic recognition of hot-cold spots
  • testo ScaleAssist for comparable images in building thermography
  • testo ε-Assist for the automatic determination of emissivity

Thermal imager 871

testo Thermal imager 871

type: testo 871

technical features

  • Infrared resolution 240 x 180 pixels
  • with testo SuperResolution technology 480 x 360 pixels
  • Thermal sensitivity 90 mK
  • Integrated digital camera
  • With testo Thermography App
  • Wireless measurement data transfer from clamp meter testo 770-3 and humidity measuring instrument testo 605i
  • With testo ScaleAssist and testo ε-Assist

Thermal imager 872

testo Thermal imager 872

type: testo 872

technical features

  • Infrared resolution 320 x 240 pixels
  • with testo SuperResolution technology 640 x 480 pixels
  • Thermal sensitivity 60 mK
  • Integrated digital laser marker
  • With testo Thermography App
  • Wireless measurement data transfer from clamp meter testo 770-3 and humidity measuring instrument testo 605i
  • With testo ScaleAssist and testo ε-Assist

Thermal imager 890-1

testo Thermal imager 890-1

type: testo 890-1

technical features

  • Detector size 640 x 480 pixels
  • SuperResolution technology to 1280 x 960 pixels
  • Thermal sensitivity < 40 mK
  • Flexibility thanks to rotatable handle and fold-out, rotatable display
  • Exchangeable lenses
  • Special measurement mode for mould-risk areas
  • High temperature measurement up to 1,200 °C
  • Panorama image assistant
  • SiteRecognition technology
  • Fully radiometric video measurement

Thermal imager 890-2

testo Thermal imager 890-2

type: testo 890-2

technical features

  • Detector size 640 x 480 pixels
  • SuperResolution technology to 1280 x 960 pixels
  • Thermal sensitivity < 40 mK
  • Flexibility thanks to rotatable handle and fold-out, rotatable display
  • Exchangeable lenses
  • Special measurement mode for mould-risk areas
  • High temperature measurement up to 1,200 °C
  • Panorama image assistant
  • SiteRecognition technology
  • Fully radiometric video measurement

Thermal imager 890-2 Set

testo Thermal imager 890-2 Set

type: testo 890-2 Set

technical features

  • Detector size 640 x 480 pixels
  • SuperResolution technology to 1280 x 960 pixels
  • Thermal sensitivity < 40 mK
  • Flexibility thanks to rotatable handle and fold-out, rotatable display
  • Exchangeable lenses
  • Special measurement mode for mould-risk areas
  • High temperature measurement up to 1,200 °C
  • Panorama image assistant
  • SiteRecognition technology
  • Fully radiometric video measurement

Digital indicator - universal input
digit height 15 mm

type: TFT1-11 | 96 x 48

technical features

  • multifunctional measuring input: direct voltage, direct current, Pt100(0),
    Thermocouple, frequency, rotational speed, counter
  • presentation of metered value of -1999…9999 Digits
  • digit height approx. 15 mm
  • selectable colour for measurand and background: red, green, white, black, orange
  • minimal installation depth: 25 mm without plug-in terminal, with transformer 42 mm
  • display panel 2,4", 320x240 Pixel
  • display of metering point description and signal description
  • adjustable signs for physical dimensions
  • min/max value recording
  • 9 adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • Tara function
  • programming interlock via access code
  • protection class IP65 at the front
  • pluggable screw terminal
  • 2 switching points (changer)
  • option: interface RS485 with Modbus protocol
  • accessories: PC-based configuration kit PM-TOOL with CD & USB adapter

DC current - voltage - standard signal, digit heigt 9mm

digital indicator, standard signal, digit heigt 9 mm

type: TFT1-13 | 96 x 48

technical features

  • Standard signals: 3x 0/4-20 mA, 0-10 VDC (galv. not isolated among each other)
  • presentation of metered value of 3x -1999…9999 digits
  • digit height approx. 9 mm
  • selectable colour for measurand and background: red, green, white, black, orange
  • minimal installation depth: 25 mm without plug-in terminal, with transformer 42 mm
  • display panel 2,4", 320x240 Pixel
  • adjustable signs for physical dimensions
  • min/max value recording
  • 9 adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • Tara function
  • programming interlock via access code
  • protection class IP65 at the front
  • pluggable screw terminal
  • option: 2 relay outputs
  • accessories: PC-based configuration kit PM-TOOL with CD & USB adaptermedia center

Digital indicator - universal input
digit height 15 mm

type: TFT2-11U | 96 x 48

technical features

  • presentation of metered value of -1999…9999 Digits
  • digit height approx. 15 mm
  • selectable colours for measurand & background: red, green, white, black, orange
  • minimal installation depth: 89 mm, including pluggable terminal
  • display panel 2,4", 320x240 Pixel
  • display of metering point description and signal description
  • adjustable signs for physical dimensions
  • min/max value recording
  • 30 adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • Tara function
  • programming interlock via access code
  • protection class IP65 at the front
  • pluggable screw terminal
  • optional: analog output 0-10 VDC, 0/4-20 mA switchable, 12 Bit or 16 Bit
  • optional: interface RS232 / RS485 with Modbus protocol
  • optional: sensor supply incl. digital input
  • optional: 2 relay outputs (Changer)
  • optional: bluetooth interface (in preparation)
  • optional: data logger (in preparation)
  • Zubehör: PC-based configuration kit PM-TOOL with USB adapter

Temperature limit value switch

Temperature limit value switch *'*

type: TGS2 | ID: TG

technical features

  • Input RTD Pt100: 2-wire / -50...500 °C
  • Thermocouple type K: NiCr-Ni / -50..1..200 °C
  • Output: Relay contact (NC or NO)
  • Supply: 24 VDC
  • Accuracy: 0,3% of nominal range
  • Operation temperature: -20...+80 °C
  • Configuration: interface, magnet
  • Connection: Terminal screws
  • Protection: IP20
  • Dimensions: Ø45x23 mm
  • Enclosure: Synthetics PA66

Transmitter temperature IO-Link

Transmitter temperature IO-Link

Type: TH-TIO | ID: TI

Technical Features

  • Input RTD Pt100: 3-wire / -200...800 °C
  • Input Type J: -210...1200 °C
  • Input Type K: -200...1372 °C
  • Input Type N: -200...1300 °C
  • Accuracy: max. 0,02 % of nominal range
  • Operating temperature: -20...+80 °C
  • Configuration: IO-Link interface
  • Connection: Terminal screws
  • Protection: IP20
  • Dimensions: Ø45x23 mm
  • Casing: Synthetics PA66

Tranmitter temperature for DIN rail

Tranmitter temperature for DIN rail

type: TP-DR | ID: ▒

technical features

  • Input RTD: Pt100, Ni100 - Input TC: Type K, S, R, J, B, T, N, E
  • Output: 4...20 mA, galvanical insulation
  • Supply: 6...32 VDC out of current loop
  • Transmission error: 0,1% FS or 0,2 °C
  • Configuration: RFID-Programmer
  • Connection: Terminal screws
  • Protection: IP20
  • Dimensions: 18xs90x64 mm
  • Enclosure: Synthetics black

RFID programmable transmitter resistance thermometer

RFID programmable transmitter resistance thermometer

type: TP-RTD | ID: ▒

technical features

  • Input: resistance thermometer, Pt100, Pt1000, Ni100
  • Output: 4...20 mA current loop (2-wire)
  • freely programmable features
  • with setup program LabSoftView for windows
  • Accuracy max. 0,1% of measurement range or 0,2°C
  • Degree of protection IP 20 (IP 54/66, when using terminal head)
  • for use with terminal head form B

RFID programmable transmitter resistance thermometer

RFID programmable transmitter thermocouple

type: TP-TC | ID: ▒

technical features

  • Input: thermocouple
  • Output: 4...20 mA current loop (2-wire)
  • freely programmable features
  • with setup program LabSoftView for windows
  • max transmission error greater between 0,1% f.s. or 0,2°C
  • Degree of protection IP 20 (IP 54/66, when using terminal head)
  • for use with terminal head form B

Universal digital controller UNIREG

Universal digital controller

Type: UNIREG | ID: UR

technical features

  • Input sensor: thermocouple, resistance thermometer
  • Linear input: 0(10)...50mV, 0(2)...10V, 0(4)...20mA
  • Control outputs: heating/cooling, configurable as relay, logic or analog signal
  • Alarm: up to 5 alarms with eligible functions
  • Alarmfunctions for load breakages
  • Indication: short-circuit, broken sensor, LBA alarm, HB alarm
  • Protection: front IP65

all-purpose enclosure size 2 U-CASE2

All-purpose enclosure - size 2

Type: U-CASE 2 | ID: --

technical features

  • Material: ASA 757G Luran S
  • Protective insulation: according VDE100
  • Recess in cover: integrated for front panel, keypad
  • Things built in: 10 mounting holes to fix components
  • Temperature range: -20...+80 °C
  • Flammability: UL94 HB
  • Dimensions: 160x90x60 mm
  • Protection: IP66, IP68, IP69k
  • EMC protection: optionally with coating

All-purpose enclosure size 5 U-CASE2

All-purpose enclosure - size 5

Type: U-CASE 5 | ID: --

technical features

  • Material: PBT GF30
  • Protective insulation: according VDE100
  • Accessories: electrcial and mechanical connections
  • Things built in: space for PCB (e. g. measuring amplifier)
  • Temperature range: up to 110 °C
  • Flammability: UL94 HB
  • Dimensions: 160x90x60 mm
  • Protection: IP65
  • EMC protection: optionally with coating

Universal + programmable process controller

Universal + programmable process controller

type: UPPC | ID: UP

technical features

  • Application: Universal programmable process controller for the control, regulation and visualization of processes up to evalution
  • Supply voltage: 100...240 V AC/24 V DC
  • Sensor supply: 18 VDC / 45 mA
  • Power consumption:
    max. 350 mA (24 V DC)
  • CPU:Cortex A8, 600 MHz … 1 GHz
  • Interfaces: USB-ports
    Back: 1 × USB 2.0 Host (Type A)
    Front: 1 × Mini-USB 2.0 Device (Type B), galvanically isolated
  • Slots: 1 × for communication card; 2 × for I/O-cards
  • Relay: 4 potential-free relay outputs, changeover contacts (230 V AC / 5A; 24 V DC / 5A)
  • Memory:  internal mass memory (4 GByte); Micro SD-Karte;     DDR2 (64 MByte); Flash (128 MByte); MRAM (128 kByte)
  • Real-time clock power failure-buffered
  • Display / Controls: TFT with backlight, 320×240 pixel QVGA, resistive touch screen; 3.5“;         4 freely assignable keys;
    2 programmable LEDs for status indications
  • Housing: witch panel mounting housing
    Dimensions (W×H×D) 98 × 98 × 115 mm (without connectors)
    98 × 98 × 130 mm (with connectors)
  • Protection type: IP 65 on the front, IP 20 rest of housing

Tension load cell

Tension load cell

type: WAEGEZ | ID: KS

technical features

  • Measurement ranges: 0…20 kg up to 0…30000 kg
  • Input resistance: 350…410 ±5 O
  • Output: 2 mV/V or 3 mV/V
  • Output resistance: 350 ±10 O
  • Isolation resistance: > 5000 MO (at 50 VDC)
  • Accuracy: ±0,03% of terminal value
  • Operating temperature: -20…+60 °C
  • Protection class: IP65 / IP66 / higher on request
  • Material: alloyed steel, nickel-plated / stainless steel (option) / Aluminum alloy (option)

Wheel- and axle load platform scale

Wheel- and axle load platform scale

type: WAP | ID: WA

technical features

  • Ranges: 10 t / 20 t / 40 t
  • Output: 1mV/V or display
  • Voltage supply: 5...15 VDC (bridge)
  • Combined error: 0,5...5% of range
  • Protection: IP66
  • Material: aluminium alloy, steel
  • Overload: 120...150%
  • Operating temperature: -20...+60 (80) °C

Cable resistance thermometer

Cable resistance thermometer

type: WT-K1 | ID: KW

technical features

  • Sensor RTD: 1x PT100 / 1x Pt1000 / 2x Pt100 / 2x Pt1000 (2-, 3-, 4-wire)
  • Accuracy: class A / class B / B1/2DIN / B1/3DIN / B1/10DIN
  • Protective sheathing: stainless steel 1.4571
  • Diameter sheath: 4 / 5 / 6 mm
  • Nominal length: 30 (d = 4) / 50 (d=4, d = 5) / 46 (d = 6) / 70 (d = 6) mm
  • Option: other length
  • Cable length: 2000 mm / Option: other length
  • Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
  • Antikink: heat shrinkable sleeve / spring / without
  • Connection: open ends

Cable resistance thermometer with GL-approval

Cable resistance thermometer with GL-approval

type: WT-K1G | ID: KW

technical features

  • Sensor RTD: 1x PT100 / 1x Pt1000 / 2x Pt100 / 2x Pt1000 (2-, 3-, 4-wire)
  • Accuracy: class A / class B / B1/2DIN / B1/3DIN / B1/10DIN
  • Protective sheathing: stainless steel 1.4571
  • Diameter sheath: 4 / 5 / 6 mm
  • Nominal length: 30 (d = 4) / 50 (d=4, d = 5) / 46 (d = 6) / 70 (d = 6) mm
  • Option: other length
  • Cable length: 2000 mm / Option: other length
  • Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
  • Antikink: heat shrinkable sleeve / spring / without
  • Connection: open ends

Cable resistance thermometer with sleeve socket

Cable resistance thermometer with sleeve socket

type: WT-KH | ID: KV

technical features

  • Sensor RTD: 1x PT100 / 1x Pt1000 / 2x Pt100 / 2x Pt1000 (2-, 3-, 4-wire)
  • Accuracy: class A / class B / B1/2DIN / B1/3DIN / B1/10DIN
  • Protective sheathing: stainless steel 1.4571, diameter: 4 / 5 / 6 mm
  • Nominal length: 25 (d = 4) / 45 (d=4, d = 5) / 41 (d = 6) / 65 (d = 6) mm
  • Option: other length
  • Cable length: 2000 mm / Option: other length
  • Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
  • Antikink: heat shrinkable sleeve / spring / without
  • Connection: open ends

Cable resistance thermometer with sleeve socket and GL-approval

Cable resistance thermometer with sleeve socket and GL-approval

type: WT-KHG | ID: KV

technical features

  • Sensor RTD: 1x PT100 / 1x Pt1000 / 2x Pt100 / 2x Pt1000 (2-, 3-, 4-wire)
  • Accuracy: class A / class B / B1/2DIN / B1/3DIN / B1/10DIN
  • Protective sheathing: stainless steel 1.4571, diameter: 4 / 5 / 6 mm
  • Nominal length: 25 (d = 4) / 45 (d=4, d = 5) / 41 (d = 6) / 65 (d = 6) mm
  • Option: other length
  • Cable length: 2000 mm / Option: other length
  • Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
  • Antikink: heat shrinkable sleeve / spring / without
  • Connection: open ends

ineral insulated resistance thermometer

Mineral insulated resistance thermometer

type: WT-MK1 | ID: KM

technical features

  • Sensor RTD: 1x PT100 / 1x Pt1000 / 2x Pt100 / 2x Pt1000 (2-, 3-, 4-wire)
  • Accuracy: class A / class B / B1/2DIN / B1/3DIN / B1/10DIN
  • Protective sheathing: stainless steel 1.4401
  • Sleeve joint: stainless steel.4571 (316Ti)
  • Diameter sheath: 1,5 / 3 / 4,5 / 6 mm
  • Nominal length: 100 mm / Option: other length
  • Cable length: 2000 mm / Option: other length
  • Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
  • Connection: open ends

Mineral insulated resistance thermometer with GL-approval

Mineral insulated resistance thermometer with GL-approval

type: WT-MK1G | ID: KM

technical features

  • Sensor RTD: 1x PT100 / 1x Pt1000 / 2x Pt100 / 2x Pt1000 (2-, 3-, 4-wire)
  • Accuracy: Class A / class B / B1/2 DIN / B1/3 DIN / B1/10DIN
  • Protective sheathing: stainless steel 1.4401
  • Sleeve joint: stainless steel.4571 (316Ti)
  • Diameter thermowell: 1,9 / 3 / 4,5 / 6 mm
  • Nominal length: 100 mm / Option: other length
  • Cable length: 2000 mm / Option: other length
  • Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
  • Connection: open wire ends

Resistance thermometer with connection head B

Resistance thermometer with connection head B

type: WT-MR1 | ID: KD

technical features

  • Sensor RTD: 1x PT100 / 1x Pt1000 / 2x Pt100 / 2x Pt1000 (2-, 3-, 4-wire)
  • Accuracy: class A / class B / B1/2DIN / B1/3DIN / B1/10DIN
  • Protective sheathing: stainless steel 1.4571 (standard element) 2.4816 (M.I. element)
  • Diameter sheath: 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 15 mm (standard) 3 / 4,5 / 6 mm (M.I. element)
  • Nominal length: 50 / 100 / 160 / 200 / 250 / 400 / 600 / 1000 mm
  • Process connection: 1/4" / 3/8" / 1/2" / 1" / 1/4NPT / 3/8NPT / 1/2NPT
  • Terminal head: aluminium IP 54

Resistance thermometer with connection head B with GL-approval
ship

Resistance thermometer with connection head B and GL-approval

type: WT-MR1G | ID: KD

technical features

  • Sensor RTD: 1x PT100 / 1x Pt1000 / 2x Pt100 / 2x Pt1000 (2-, 3-, 4-wire)
  • Accuracy: class A / class B / B1/2DIN / B1/3DIN / B1/10DIN
  • Protective sheathing: stainless steel 1.4571 (standard element) 2.4816 (M.I. element)
  • Diameter sheath: 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 15 mm (standard) 3 / 4,5 / 6 mm (M.I. element)
  • Nominal length: 50 / 100 / 160 / 200 / 250 / 400 / 600 / 1000 mm
  • Process connection: 1/4" / 3/8" / 1/2" / 1" / 1/4NPT / 3/8NPT / 1/2NPT
  • Terminal head: aluminium IP 54

OEM Elektronics IO-Link
 

OEM-Elektronics IO-Link

Müller Industrie-Elektronik is your competent partner for customized solutions when it comes to low-cost OEM electronics with IO-Link interface. Fast, flexible, reliable and for every measured variable, whether as a pure board for your own sensor line or complete with housing as an IO-Link-capable OEM product solution to complete your product range. Our IO-Link experts in our in-house development department implement YourSolution | OEM-Elektronics IO-Link quickly and cost-effectively for you.
 

YourSolution|OEM-Sensors
 

YourSolution | OEM Sensors - in a few steps!

Müller Industrie-Elektronik is your competent partner for customized solutions: YourSolution, when it comes to low-cost OEM sensors in series production. Fast, flexible, reliable and any desired component or sensor type! With our in-house development department we implement OEM sensors for you as individual YourSolution in just a few steps.

 

Always Induce the Right Pressure!

The range of electronic and mechanical pressure gauges for the entire industrial sector - from heavy industry to shipbuilding - includes pressure sensors, pressure switches, programmable pressure transmitters in a robust field frame, melt pressure transducers and pressure transmitters for measuring overpressure, absolute pressure and differential pressure. International approvals such as IECEx or DNV GL for pressure measurements in potentially explosive atmospheres or for maritime applications are available for various pressure gauges. High-quality Bourdon gauges for measuring points in high dynamic pressure and vibration environments and pressure sensors with flange connection for hygienic applications in the food and pharmaceutical sector round out the comprehensive product portfolio of pressure measurement technology.

Products "Made in Germany"


Müller Industrie-Elektronik manufactures measuring devices, sensors, transmitters, limit switches, calibrators and digital displays for industrial measuring and control technology, transmitters and amplifiers for signal processing, display devices and evaluation instruments in the region Hannover at the company location Neustadt am Rübenberge. Services such as contract manufacturing, board production, cable assembly, 3D construction, prototype construction and measuring device calibration complete the extensive product portfolio.