Müller Industrie-Elektronik GmbH Müller Industrie-Elektronik GmbH
Strain Gauge Transmitters

Strain Gauge Transmitters

Strain Gauge Bridge Amplifier SIL1 + PL"c"
SMM-HD-SIL1-IO | ID: [?]

Strain Gauge Bridge Amplifier SIL1 + PL"c" + IO-Link

type: SMM-HD-SIL1 | ID: [?]

technical features

  • […]
  • Sensor input: 1x strain gauge full bridge (350 O)
  • Strain gauge sensitivity: up to 4 mV/V
  • Sensor supply: 1,25...3 VDC
  • Analog output: 4…20 mA / 0…10 V / 0,5…10,5 V / 2…10 V
  • Voltage supply: 9…35 VDC
  • Accuracy: see technical data
  • Protection class: IP65
  • Vibration resistance: none
  • Switch output: max. 30 VAC / VDC, at max. 500 mA
  • Casing: U-CASE 2 (162,2 x 92,2 (101,1) x 60,2 mm)
  • Approvals: SIL1 and Performance level c

Strain Gauge Bridge Amplifier SIL1 + PL"c"
SMM-DR-SIL1 | ID: RA

Strain Gauge Bridge Amplifier SIL1 + PL"c"

type: SMM-DR-SIL1 | ID: RA

technical features

  • Sensor input: 1x strain gauge full bridge (350 ohms)
  • Stain gauge sensitivity: up to 4 mV/V
  • Sensor supply: 1,25…3 VDC
  • Analog output: 4…20 mA / 0…10 V / 0,5…10,5 V / 2…10 V
  • Voltage supply: 18…35VDC
  • Accuracy: see technical data
  • Protection: IP20
  • Vibration resistance: none
  • Switch output: max. 30 VAC / VDC, at max. 500 mA
  • Enclosure: DR22,5 (117,2x22,5x113,6)
  • Certificate: SIL 1, Performance Level "c"

Strain Gauge Bridge Amplifier SIL1 + PL"c"
SMM-HD-SIL1 | ID: QX

Strain Gauge Bridge Amplifier SIL1 + PL"c"

type: SMM-HD-SIL1 | ID: QX

technical features

  • Sensor input: 1x strain gauge full bridge (350 O)
  • Strain gauge sensitivity: up to 4 mV/V
  • Sensor supply: 1,25...3 VDC
  • Analog output: 4…20 mA / 0…10 V / 0,5…10,5 V / 2…10 V
  • Voltage supply: 9…35 VDC
  • Accuracy: see technical data
  • Protection class: IP65
  • Vibration resistance: none
  • Switch output: max. 30 VAC / VDC, at max. 500 mA
  • Casing: U-CASE 2 (162,2 x 92,2 (101,1) x 60,2 mm)
  • Approvals: SIL1 and Performance level c

Strain gauge amplifier IO-Link
MISG-IO | ID: FC

Strain gauge amplifier IO-Link

Typ: MISG-IO | ID: FC

Technical features

  • Input: 1 strain gauge full bridge
  • Bridge load: minimal 350 Ohm
  • Measurement range: free adjustable in a range of -32000...+32000
  • Output: IO-Link
  • Resolution: 16 bit
  • Strain gauge supply: 3 VDC
  • Gross error: 0,05% of range
  • Electrical connection: several plugs, cable
  • Casing: PBT GF30 black
  • Dimensions: 72x28x35 mm (without electrical connection)
  • Protection class: at least IP65

Strain gauge amplifier
DRMU-S2 - DRSG-S2 | ID: DR series 2

Strain gauge amplifier *'*

type: DRMU-S2 - DRSG-S2  | ID: DR series 2

technical features

  • Input: 1 strain gauge full bridge
  • Bridge resistance: 350 Ω minimum
  • Output: 4...20 mA current loop
  • Supply: Current loop
  • Electrical connection: 2...6 plug-in terminal strip
  • Limit vale contacts: without
  • Protection: IP20
  • Accuracy: see data sheet
  • Enclosure: for DIN rail

Strain gauge amplifier
DRMU-S4 - DRSG-S4 | ID: DR series 4

Strain gauge amplifier *'*

type: DRMU-S4 - DRSG-S4 | ID: DR series 4

technical features

  • Input: 1 strain gauge full bridge
  • Bridge resistance: 350 ohms minimun
  • Output: 4...20 mA current loop
  • Supply: 24 VDC, 85...250 VAC, current loop
  • Electrical connection: 2...6 plug-in terminal strip
  • Limit vale contacts: 2x electronically,
    2x relays
  • Protection: IP20
  • Accuracy: see data sheet
  • Enclosure: for DIN rail

Digital Strain Gauge Amplifier
ADHM-LC | ID: LH

Digital Strain Gauge Amplifier *'*

type: ADHM-LC | ID: LH

technical features

  • Connection: 1x strain gauge full bridge, 350 ohms
  • Input sensitivity: 1...4 mV/V
  • Configuration: via interface
  • Output: 4...20 mA
  • Supply: 12...40 VDC out of current loop
  • Electrical connection: pluggable - Combined error: 0,3% of nominal range
  • Resolution: 16 bit
  • Enclosure: stainless steel
  • Protection: IP 65

DMS - Brücken - Messverstärker SIL3 + PL"e"
SMM-DR | ID: ▒

Strain Gauge Bridge Amplifier SIL3 + PL"e"

type: SMM-DR | ID: ▒

technical features

  • Sensor input: 1x strain gauge full bridge (350 ohms)
  • Stain gauge sensitivity: up to 4 mV/V
  • Bridge supply: 5 VDC
  • Analog output: 2x 4...20 mA
  • Voltage supply: 24 VDC +/-10%
  • Accuracy: 5% deviation channel A / channel B
  • Protection: IP20
  • Diagnostic input: Test pulse 24 VDC
  • Enclosure: DR22,5 (117,2x22,5x113,6)
  • Certificate: SIL 3, Performance Level "e"

Digital strain gauge amplifier
SMM-HD | ID: ▒

Strain Gauge Bridge Amplifier SIL3 + PL"e"

type: SMM-HD | ID: ▒

technical features

  • Sensor input: 1x or 2x strain gauge full bridge (350 ohms)
  • Stain gauge sensitivity: up to 4 mV/V
  • Bridge supply: 5 VDC
  • Analog output: 2x 4...20 mA for each strain gauge
  • Voltage supply: 24 VDC +/-10%
  • Accuracy: 5% deviation channel A / channel B
  • Protection: IP65
  • Diagnostic input: Test pulse 24 VDC
  • Enclosure: U-CASE2 (162,2 x 92,2 (101,1) x 60,2 mm)
  • Certificate: SIL 3, Performance Level "e"

Digital strain gauge amplifier
ADLM-HD | ID: DD

Digital strain gauge amplifier

type: ADLM-HD | ID: DD

technical features

  • Input: up to 4 strain gauge full bridges
  • Input sensitivity: 0,1...5 mV/V
  • Analog output: 4...20 mA / 0...10 V
  • Voltage supply: 24 VDC +/-30%
  • Resolution: 12 / 14 / 15 / 16 bit
  • Combined error: 0,2% of end scale value
  • Optionally: limit value switch / interface / vibration protection
  • Degree of protection: IP65
  • Adjustment: via RS232 interface

Digital strain gauge and standard signal amplifier
ADLM-NS | ID: AD

Digital strain gauge and standard signal amplifier

type: ADLM-NS | ID: AD

technical features

  • Input Strain gauge: up to 4 full bridges
  • Input sensitivity: 0,1...5 mV/V
  • Input standard signal: 4...20 mA, 0...10 V
  • Analog output: 4...20 mA / 0...10 V
  • Voltage supply: 24 VDC
  • Resolution: 12 / 14 / 15 / 16 bit
  • Combined error: 0,2% of end scale value
  • Optionally: limit value switch / interface
  • Degree of protection: IP20
  • Adjustment: via RS232 interface

Digital strain gauge amplifier
DR-ADLM | ID: BD

Digital strain gauge amplifier

type: DR-ADLM | ID: BD

technical features

  • Input Strain gauge: up to 2 full bridges, 0(4)...20 mA, 0...10 V
  • Input sensitivity: 0,1...5 mV/V
  • Analog output: 4...20 mA / 0...10 V
  • Voltage supply: 24 VDC
  • Resolution: 12 / 14 / 15 / 16 bit
  • Combined error: 0,2% of end scale value
  • Optionally: interface
  • Degree of protection: IP20
  • Adjustment: via RS485 or USB interface

Strain gauge amplifier
MISG | ID: MJ

Strain gauge amplifier *'*

type: MISG | ID: MJ

technical features

  • Input strain gauge: 1 full bridge, 4-wire
  • Input sensitivity: 1...4 mV/V
  • Output: 4...20 mA
  • Voltage supply: 12...40 VDC
  • Resolution: 16 bit
  • Combined error: 0,3% of range
  • Bridge supply: 1 VDC
  • Protection: at least IP65
  • Configuration: Software

Mobile digital strain gauge amplifier
ADLM-HA | ID: DM

Mobile digital strain gauge amplifier

type: ADLM-HA | ID: DM

technical features

  • Input: 2 strain gauge full bridges
  • Input sensitivity: 0,1...5 mV/V
  • Analog output: 4...20 mA / 0...10 V
  • Voltage supply: accumulator
  • Resolution: 12 / 14 / 15 / 16 bit
  • Combined error: 0,2% of end scale value
  • Degree of protection: IP54
  • Adjustment: via RS232 interface or programming keys

Digital load measuring system
DLM-HD | ID: LS

Digital load measuring system

type: DLM-HD | ID: LS

technical features

  • TÜV approval for use in systems with AK4
  • µP-device for simple programming
  • 4 resistance strain gauge full-bridge sensors
  • 2 adjustable limit switches, relay output with restraint
  • Configurable analog output, 0...1(10)v or 0(4)...20mA galvanic insulation
  • Interfaces RS232, RS485, Interbus S, LWL, CANbus, Profibus galvanically insulated
  • Tare - function
  • Redundant construction for limit switch and test equipment, monitoring of sensor break and short circuit
  • Accuracy +/- 0,1% of end scale value

Digital measuring amplifier for strain gauge
SU-DX | ID: DL

Digital measuring amplifier for strain gauge

type: SU-DX | ID: DL

technical features

  • Input sensivity 01 to 5 mV/V
  • Programmable via RS232 interface
  • Analog output 4...20 mA and 0...10 V
  • Supply voltage 24 VDC +/- 30%
  • Combined error 0,2% FS
  • Resolution 12 / 14 / 15 / 16 bit
  • Enclosure plastics
  • Degree of protection IP 67

Sixfold strain gauge summing-up box
DSV-6N | ID: SD

Sixfold strain gauge summing-up box

type: DSV-6N | ID: SD

technical features

  • Input: 6 strain gauge full bridges
  • Output: 1 strain gauge summing-up signal
  • Sensors: 4- or 6-wires
  • Bridge supply: out of amplifier or internally
  • Supply: 12...30 VDC VDC (optionally)
  • Cascade circuit possible
  • Connection: screwed pin and socket, lockable
  • Cable entries: 7 pcs M16x1,5

Measuring amplifier strain gauge
ALM-HD2 | ID: AJ

Measuring amplifier strain gauge

type: ALM-HD2 | ID: AJ

technical features

  • Input sensitivity (0,1 mV/V up to 4 mV/V) selectable by DIP-switches
  • Connection of max. 4 resistance strain gauge sensors (full bridge, 350 ohms)
  • Change over analog output 0 (4)...+/- 20 mA or 0 (2)...+/-10 V
  • Sensor supply voltage internally continiously adjustable (4...14 V)
  • 2 adjustable limit value switches (potential free change over contacts)
  • Accuracy +/-0,1% of end of scale value
  • Supply voltage 85...265 VAC or 24 VDC

Analog Strain Gauge Amplifier
ALM-NS | ID: AN

Analog Strain Gauge Amplifier

type: ALM-NS | ID: AN

technical features

  • Input strain gauge: up to 4 full bridges (350 Ω)
  • Sensitivity strain gauge: 0,1...4 mV/V (by steps)
  • Output: 2...10 V and 4...20 mA, 0...10 V and 0...20 mA
  • Voltage supply: 42 VAC / 115 VAC / 230 VAC / 24 VAC24 VDC
    galvanically isolated
  • Limit value: 2 floating contacts (option)
  • Bridge supply: 4...14 V adjustable
  • Linearity: ± 0,02% of terminal value
  • Mounting: top hat rail
  • Measurement monitoring: sensor break
  • Adjustment limit value: no need to connect strain gauge

Digital measuring amplifier for strain gauge
ADLM-LC | ID: LA

Digital measuring amplifier for strain gauge

type: ADLM-LC | ID: LA

technical features

  • Input sensivity 01 to 5 mV/V
  • Programmable via RS232 interface
  • Analog output 4...20 mA and 0...10 V
  • Supply voltage 24 VDC +/- 30%
  • Combined error 0,2% FS
  • Resolution 12 / 14 / 15 / 16 bit
  • Enclosure stainless steel
  • Degree of protection IP 65

Summin amplifier for resistance strain gauge
DSV | ID: DV

Summing amplifier for resistance strain gauge

type: DSV | ID: DV

technical features

  • 4 inputs resistance strain gauge, full bridges
  • Addition of single measure values
  • 1 output for connection to every measuring amplifier with input for resistance strain gauge bridges
  • Cascading of several summing amplifiers is possible
  • External power supply for the bridges can be connected on demand

Products

Applications

Login
Business-Partner
Downloads
Newsletter


Müller Industrie-Elektronik GmbH
Justus-von-Liebig-Straße 24
DE 31535 Neustadt am Rübenberge

memberofmmcAG Logo quer MIE Webseite invers di20250624
+49 5032 9672 - 111
info@mueller-ie.com

Update: 16.07.2025 | INHA
© 2025 - Müller Industrie-Elektronik GmbH