Current News

dms transmitters

ADHM-LC
Digital Strain Gauge Amplifier *'*

type: ADHM-LC | ID: LH
technical features

Connection: 1x strain gauge full bridge, 350 ohms

Input sensitivity: 1...4 mV/V

Configuration: via interface

Output: 4...20 mA

Supply: 12...40 VDC out of current loop

Electrical connection: pluggable - Combined error: 0,3% of nominal range

Resolution: 16 bit

Enclosure: stainless steel

Protection: IP 65
ADLM-HA
Mobile digital strain gauge amplifier

type: ADLM-HA | ID: DM
technical features

Input: 2 strain gauge full bridges

Input sensitivity: 0,1...5 mV/V

Analog output: 4...20 mA / 0...10 V

Voltage supply: accumulator

Resolution: 12 / 14 / 15 / 16 bit

Combined error: 0,2% of end scale value

Degree of protection: IP54

Adjustment: via RS232 interface or programming keys
ADLM-HD
Digital strain gauge amplifier

type: ADLM-HD | ID: DD
technical features

Input: up to 4 strain gauge full bridges

Input sensitivity: 0,1...5 mV/V

Analog output: 4...20 mA / 0...10 V

Voltage supply: 24 VDC +/-30%

Resolution: 12 / 14 / 15 / 16 bit

Combined error: 0,2% of end scale value

Optionally: limit value switch / interface / vibration protection

Degree of protection: IP65

Adjustment: via RS232 interface
ADLM-LC
Digital measuring amplifier for strain gauge

type: ADLM-LC | ID: LA
technical features

Input sensivity 01 to 5 mV/V

Programmable via RS232 interface

Analog output 4...20 mA and 0...10 V

Supply voltage 24 VDC +/- 30%

Combined error 0,2% FS

Resolution 12 / 14 / 15 / 16 bit

Enclosure stainless steel

Degree of protection IP 65
ADLM-NS
Digital strain gauge and standard signal amplifier

type: ADLM-NS | ID: AD
technical features

Input Strain gauge: up to 4 full bridges

Input sensitivity: 0,1...5 mV/V

Input standard signal: 4...20 mA, 0...10 V

Analog output: 4...20 mA / 0...10 V

Voltage supply: 24 VDC

Resolution: 12 / 14 / 15 / 16 bit

Combined error: 0,2% of end scale value

Optionally: limit value switch / interface

Degree of protection: IP20

Adjustment: via RS232 interface
ALM-HD2
Measuring amplifier strain gauge

type: ALM-HD2 | ID: AJ
technical features

Input sensitivity (0,1 mV/V up to 4 mV/V) selectable by DIP-switches

Connection of max. 4 resistance strain gauge sensors (full bridge, 350 ohms)

Change over analog output 0 (4)...+/- 20 mA or 0 (2)...+/-10 V

Sensor supply voltage internally continiously adjustable (4...14 V)

2 adjustable limit value switches (potential free change over contacts)

Accuracy +/-0,1% of end of scale value

Supply voltage 85...265 VAC or 24 VDC
ALM-NS
Analog Strain Gauge Amplifier

type: ALM-NS | ID: AN
technical features

Input strain gauge: up to 4 full bridges (350 Ω)

Sensitivity strain gauge: 0,1...4 mV/V (by steps)

Output: 2...10 V and 4...20 mA, 0...10 V and 0...20 mA

Voltage supply: 42 VAC / 115 VAC / 230 VAC / 24 VAC24 VDC
galvanically isolated

Limit value: 2 floating contacts (option)

Bridge supply: 4...14 V adjustable

Linearity: ± 0,02% of terminal value

Mounting: top hat rail

Measurement monitoring: sensor break

Adjustment limit value: no need to connect strain gauge
DLM-HD Digital load measuring system
Digital load measuring system

type: DLM-HD | ID: LS
technical features

TÜV approval for use in systems with AK4

µP-device for simple programming

4 resistance strain gauge full-bridge sensors

2 adjustable limit switches, relay output with restraint

Configurable analog output, 0...1(10)v or 0(4)...20mA galvanic insulation

Interfaces RS232, RS485, Interbus S, LWL, CANbus, Profibus galvanically insulated

Tare - function

Redundant construction for limit switch and test equipment, monitoring of sensor break and short circuit

Accuracy +/- 0,1% of end scale value
DR-ADLM
Digital strain gauge amplifier

type: DR-ADLM | ID: BD
technical features

Input Strain gauge: up to 2 full bridges, 0(4)...20 mA, 0...10 V

Input sensitivity: 0,1...5 mV/V

Analog output: 4...20 mA / 0...10 V

Voltage supply: 24 VDC

Resolution: 12 / 14 / 15 / 16 bit

Combined error: 0,2% of end scale value

Optionally: interface

Degree of protection: IP20

Adjustment: via RS485 or USB interface
DRMU-S2 - DRSG-S2
Strain gauge amplifier *'*

type: DRMU-S2 - DRSG-S2 | ID: DR series 2
technical features

Input: 1 strain gauge full bridge

Bridge resistance: 350 Ω minimum

Output: 4...20 mA current loop

Supply: Current loop

Electrical connection: 2...6 plug-in terminal strip

Limit vale contacts: without

Protection: IP20

Accuracy: see data sheet

Enclosure: for DIN rail
DRMU-S4 - DRSG-S4
Strain gauge amplifier *'*

type: DRMU-S4 - DRSG-S4 | ID: DR series 4
technical features

Input: 1 strain gauge full bridge

Bridge resistance: 350 ohms minimun

Output: 4...20 mA current loop

Supply: 24 VDC, 85...250 VAC, current loop

Electrical connection: 2...6 plug-in terminal strip

Limit vale contacts: 2x electronically,
2x relays

Protection: IP20

Accuracy: see data sheet

Enclosure: for DIN rail
DSV
Summing amplifier for resistance strain gauge

type: DSV | ID: DV
technical features

4 inputs resistance strain gauge, full bridges

Addition of single measure values

1 output for connection to every measuring amplifier with input for resistance strain gauge bridges

Cascading of several summing amplifiers is possible

External power supply for the bridges can be connected on demand
DSV-6N
Sixfold strain gauge summing-up box

type: DSV-6N | ID: SD
technical features

Input: 6 strain gauge full bridges

Output: 1 strain gauge summing-up signal

Sensors: 4- or 6-wires

Bridge supply: out of amplifier or internally

Supply: 12...30 VDC VDC (optionally)

Cascade circuit possible

Connection: screwed pin and socket, lockable

Cable entries: 7 pcs M16x1,5
MISG
Strain gauge amplifier *'*

type: MISG | ID: MJ
technical features

Input strain gauge: 1 full bridge, 4-wire

Input sensitivity: 1...4 mV/V

Output: 4...20 mA

Voltage supply: 12...40 VDC

Resolution: 16 bit

Combined error: 0,3% of range

Bridge supply: 1 VDC

Protection: at least IP65

Configuration: Software
MISG-IO
Strain gauge amplifier IO-Link

Typ: MISG-IO | ID: FC
Technical features

Input: 1 strain gauge full bridge

Bridge load: minimal 350 Ohm

Measurement range: free adjustable in a range of -32000...+32000

Output: IO-Link

Resolution: 16 bit

Strain gauge supply: 3 VDC

Gross error: 0,05% of range

Electrical connection: several plugs, cable

Casing: PBT GF30 black

Dimensions: 72x28x35 mm (without electrical connection)

Protection class: at least IP65
SMM-DR
Strain Gauge Bridge Amplifier SIL3 + PL"e"

type: SMM-DR | ID: ▒
technical features

Sensor input: 1x strain gauge full bridge (350 ohms)

Stain gauge sensitivity: up to 4 mV/V

Bridge supply: 5 VDC

Analog output: 2x 4...20 mA

Voltage supply: 24 VDC +/-10%

Accuracy: 5% deviation channel A / channel B

Protection: IP20

Diagnostic input: Test pulse 24 VDC

Enclosure: DR22,5 (117,2x22,5x113,6)

Certificate: SIL 3, Performance Level "e"
SMM-DR-SIL1
Strain Gauge Bridge Amplifier SIL1 + PL"c"

type: SMM-DR-SIL1 | ID: RA
technical features

Sensor input: 1x strain gauge full bridge (350 ohms)

Stain gauge sensitivity: up to 4 mV/V

Sensor supply: 1,25…3 VDC

Analog output: 4…20 mA / 0…10 V / 0,5…10,5 V / 2…10 V

Voltage supply: 18…35VDC

Accuracy: see technical data

Protection: IP20

Vibration resistance: none

Switch output: max. 30 VAC / VDC, at max. 500 mA

Enclosure: DR22,5 (117,2x22,5x113,6)

Certificate: SIL 1, Performance Level "c"
SMM-HD
Strain Gauge Bridge Amplifier SIL3 + PL"e"

type: SMM-HD | ID: ▒
technical features

Sensor input: 1x or 2x strain gauge full bridge (350 ohms)

Stain gauge sensitivity: up to 4 mV/V

Bridge supply: 5 VDC

Analog output: 2x 4...20 mA for each strain gauge

Voltage supply: 24 VDC +/-10%

Accuracy: 5% deviation channel A / channel B

Protection: IP65

Diagnostic input: Test pulse 24 VDC

Enclosure: U-CASE2 (162,2 x 92,2 (101,1) x 60,2 mm)

Certificate: SIL 3, Performance Level "e"
SMM-HD-SIL1
Strain Gauge Bridge Amplifier SIL1 + PL"c"

type: SMM-HD-SIL1 | ID: QX
technical features

Sensor input: 1x strain gauge full bridge (350 O)

Strain gauge sensitivity: up to 4 mV/V

Sensor supply: 1,25...3 VDC

Analog output: 4…20 mA / 0…10 V / 0,5…10,5 V / 2…10 V

Voltage supply: 9…35 VDC

Accuracy: see technical data

Protection class: IP65

Vibration resistance: none

Switch output: max. 30 VAC / VDC, at max. 500 mA

Casing: U-CASE 2 (162,2 x 92,2 (101,1) x 60,2 mm)

Approvals: SIL1 and Performance level c
SMM-HD-SIL1-IO
Strain Gauge Bridge Amplifier SIL1 + PL"c" + IO-Link

type: SMM-HD-SIL1 | ID: [?]
technical features

[…]

Sensor input: 1x strain gauge full bridge (350 O)

Strain gauge sensitivity: up to 4 mV/V

Sensor supply: 1,25...3 VDC

Analog output: 4…20 mA / 0…10 V / 0,5…10,5 V / 2…10 V

Voltage supply: 9…35 VDC

Accuracy: see technical data

Protection class: IP65

Vibration resistance: none

Switch output: max. 30 VAC / VDC, at max. 500 mA

Casing: U-CASE 2 (162,2 x 92,2 (101,1) x 60,2 mm)

Approvals: SIL1 and Performance level c
SU-DX
Digital measuring amplifier for strain gauge

type: SU-DX | ID: DL
technical features

Input sensivity 01 to 5 mV/V

Programmable via RS232 interface

Analog output 4...20 mA and 0...10 V

Supply voltage 24 VDC +/- 30%

Combined error 0,2% FS

Resolution 12 / 14 / 15 / 16 bit

Enclosure plastics

Degree of protection IP 67