Pressure transmitter SIL

Pressure transmitter SIL

type: PT-SIL | ID: UI

technical features


  • Ranges: 0...0,1 bar up to 0...1000 bar / -1...+24 bar
  • Output: Current / Voltage / Ratiometric
  • Supply: see data sheet
  • Accuracy: 0,5% (0,25%)of span
  • Degree of protection: IP67 (IP65 with valve plug)
  • Casing: 316Ti-steel
  • Process connection: G 1/2, G 1/4, 1/2 NPT, 1/4 NPT
  • Connection: See data sheet

Safety control unit

Safety control unit SIL3|PLe 

type: SCU-DR | ID: ▒

technical features

  • Compact-type Safe PLC suitable up to PL e (EN13849) or SIL3 (EN61508)
  • Safe digital inputs: 14 (inclusive 10 OSSD compatible)
  • Safe analog inputs: 2 (4 standard)
  • Safe relay outputs: 3 (6 standard)
  • Standard outputs: 2
  • Pulse outputs (clock): 2 (for cross short circuit detection)
  • Supply: 24 VDC
  • Operation temperature: 50 °C
  • Mounting: Top hat rail
  • Option: Interface modules
  • Protection: IP20
  • Control: Keys for Acknowledge, Start, Reset on front

Modular Universal Load Cell SIL3 + PL"e"

Modular Universal Load Cell SIL3 + PL"e"

type: MULC | ID: CH

technical features

  • Sensor input: 1x strain gauge full bridge
    (350 ohms)
  • Function load cell: tension load, compression load, tension and compression load
  • Measuring range: 1000 kg, 1500 kg, 3000 kg
  • Analog output: 2x 4...20 mA
  • Power supply: 24 VDC +/-10%
  • Accuracy: 5% deviation setpoint/actual value
  • Protection: IP54
  • Vibration protection: electronics completely potted
  • Test input: test pulse 24 VDC
  • Material load cell: stainless steel, alloy steel nickel-plated
  • Certificates: SIL 3, Performance Level "e"

Digital strain gauge amplifier

Strain Gauge Bridge Amplifier SIL3 + PL"e"

type: SMM-HD | ID: ▒

technical features

  • Sensor input: 1x or 2x strain gauge full bridge (350 ohms)
  • Stain gauge sensitivity: up to 4 mV/V
  • Bridge supply: 5 VDC
  • Analog output: 2x 4...20 mA for each strain gauge
  • Voltage supply: 24 VDC +/-10%
  • Accuracy: 5% deviation channel A / channel B
  • Protection: IP20
  • Diagnostic input: Test pulse 24 VDC
  • Enclosure: U-CASE2 (162,2 x 92,2 (101,1) x 60,2 mm)
  • Certificate: SIL 3, Performance Level "e"

DMS - Brücken - Messverstärker SIL3 + PL"e"

Strain Gauge Bridge Amplifier SIL3 + PL"e"

type: SMM-DR | ID: ▒

technical features

  • Sensor input: 1x strain gauge full bridge (350 ohms)
  • Stain gauge sensitivity: up to 4 mV/V
  • Bridge supply: 5 VDC
  • Analog output: 2x 4...20 mA
  • Voltage supply: 24 VDC +/-10%
  • Accuracy: 5% deviation channel A / channel B
  • Protection: IP20
  • Diagnostic input: Test pulse 24 VDC
  • Enclosure: DR22,5 (117,2x22,5x113,6)
  • Certificate: SIL 3, Performance Level "e"