Digital indicator bargraph 55 segments
type: MB2-F | 96 x 96
technical features
Indication: 55 segments, 5 digit, 7-segments display (14 mm)
Range of indication: skale -19999...99999
Colour: red
Operation: front panel keyboard IP65
Interface: RS232 / RS485
Input: 0,01 Hz...999,99 kHz
Option: 3-wire PNP/NPN, Namur, incremental encoder, TTL signals
Output: 0(4)...20 mA, 0...10 V (16 bit switchable)
Switching output: 2x relays (option), 250 VAC / 5 AAC, 30 VDC / 5 ADC
Supply: 10...40 VDC, 18...30 VAC, 100...240 VAC
Sensor supply: 12 VDC / 50 mA, 24 VDC / 50 mA
Digital input
Other: min/max, volume metering, flashing display
Strain Gauge Bridge Amplifier SIL3 + PL"e"
type: SMM-HD | ID: ▒
technical features
- Sensor input: 1x or 2x strain gauge full bridge (350 ohms)
- Stain gauge sensitivity: up to 4 mV/V
- Bridge supply: 5 VDC
- Analog output: 2x 4...20 mA for each strain gauge
- Voltage supply: 24 VDC +/-10%
- Accuracy: 5% deviation channel A / channel B
- Protection: IP65
- Diagnostic input: Test pulse 24 VDC
- Enclosure: U-CASE2 (162,2 x 92,2 (101,1) x 60,2 mm)
- Certificate: SIL 3, Performance Level "e"
Strain Gauge Bridge Amplifier SIL3 + PL"e"
type: SMM-DR | ID: ▒
technical features
- Sensor input: 1x strain gauge full bridge (350 ohms)
- Stain gauge sensitivity: up to 4 mV/V
- Bridge supply: 5 VDC
- Analog output: 2x 4...20 mA
- Voltage supply: 24 VDC +/-10%
- Accuracy: 5% deviation channel A / channel B
- Protection: IP20
- Diagnostic input: Test pulse 24 VDC
- Enclosure: DR22,5 (117,2x22,5x113,6)
- Certificate: SIL 3, Performance Level "e"
Digital Strain Gauge Amplifier *'*
type: ADHM-LC | ID: LH
technical features
- Connection: 1x strain gauge full bridge, 350 ohms
- Input sensitivity: 1...4 mV/V
- Configuration: via interface
- Output: 4...20 mA
- Supply: 12...40 VDC out of current loop
- Electrical connection: pluggable - Combined error: 0,3% of nominal range
- Resolution: 16 bit
- Enclosure: stainless steel
- Protection: IP 65
Digital indicator -
current loop display with ATEX approval
type: CULO-M | ID: CM
technical features
- Input: 4...20 mA current loop
- Voltage across: ca. 3,2 V
- Display range: adjustable -999...9999
- Memory: Minimum / maximum
- Adjustment: 3 keys on the back
- Unit: Digit 4 programmable (°C/°F)
- Option Ex protection: II 2 G Ex ia IIC T6
- Unit: Dimension strip under front foil
- Protection: Front IP67, back IP20, electronics potted
- Enclosure: 96x48 mm for flush mounting
- Mounting depth: ca. 30 mm