Strain Gauge Bridge Amplifier SIL3 + PL"e"
type: SMM-DR | ID: ▒
technical features
- Sensor input: 1x strain gauge full bridge (350 ohms)
- Stain gauge sensitivity: up to 4 mV/V
- Bridge supply: 5 VDC
- Analog output: 2x 4...20 mA
- Voltage supply: 24 VDC +/-10%
- Accuracy: 5% deviation channel A / channel B
- Protection: IP20
- Diagnostic input: Test pulse 24 VDC
- Enclosure: DR22,5 (117,2x22,5x113,6)
- Certificate: SIL 3, Performance Level "e"
Digital Strain Gauge Amplifier *'*
type: ADHM-LC | ID: LH
technical features
- Connection: 1x strain gauge full bridge, 350 ohms
- Input sensitivity: 1...4 mV/V
- Configuration: via interface
- Output: 4...20 mA
- Supply: 12...40 VDC out of current loop
- Electrical connection: pluggable - Combined error: 0,3% of nominal range
- Resolution: 16 bit
- Enclosure: stainless steel
- Protection: IP 65
Digital indicator -
current loop display with ATEX approval
type: CULO-M | ID: CM
technical features
- Input: 4...20 mA current loop
- Voltage across: ca. 3,2 V
- Display range: adjustable -999...9999
- Memory: Minimum / maximum
- Adjustment: 3 keys on the back
- Unit: Digit 4 programmable (°C/°F)
- Option Ex protection: II 2 G Ex ia IIC T6
- Unit: Dimension strip under front foil
- Protection: Front IP67, back IP20, electronics potted
- Enclosure: 96x48 mm for flush mounting
- Mounting depth: ca. 30 mm
Relative Pressure Transmitter *'*
type: MIPS | ID: MO
technical features
- Input: pressure 0...10 mbar bis 0...100 mbar
- Output: 4...20 mA current loop (2-wire)
- Voltage supply: out of current loop (12...40 VDC)
- Accuracy: see technical details
- Process connection: 1x hose connection
- Medium: clean dry air, dry gases
- Electrical connection: several plugs / cable
- Temperature range: -20...+80 °C (operation)
- Adjustment: software
- Material enclosure: PBT GF 30
- Protection: at least IP65
Pressure Sensor - Flush *'*
type: MEPS-F | ID: OZ
technical features
- Input: 0...0,1 to 0...600 bar / 0...0,25 to 0...16 bar
- Output: 4...20 mA current loop (2-wire)
- Supply: out of current loop (12...40 VDC)
- Accuracy: see technical data
- Process connection: G1/2B / G1B flush-mounted / G1 hygienic
- Electrical connection: several options (page 3)
- Ambient temperature: -20...+80 °C (operation)
- Limit value contacts: 2x electronic (NPN, PNP)
- Setting: Keys / Software
- Medium temperature: -30...+100 °C
- Protection: at least IP65
