Strain gauge amplifier IO-Link

Strain gauge amplifier IO-Link

Typ: MISG-IO | ID: FC

Technical features

  • Input: 1 strain gauge full bridge
  • Bridge load: minimal 350 Ohm
  • Measurement range: free adjustable in a range of -32000...+32000
  • Output: IO-Link
  • Resolution: 16 bit
  • Strain gauge supply: 3 VDC
  • Gross error: 0,3% of range
  • Electrical connection: several plugs, cable
  • Casing: PBT GF30 black
  • Dimensions: 72x28x35 mm (without electrical connection)
  • Protection class: at least IP65

Universal Transmitter 2-channel IO-Link

Universal Transmitter 2-channel IO-Link

type: MIUT-IO | ID: NO

Technical features

  • Input channel 1: Strain gauge full bridge
  • Input channel 2: Universal
  • Output: IO-Link
  • Resolution: 16 bit / 24 bit
  • Accuracy: max. 0,3% of nominal range
  • Operating temperature: -20...+85 °C
  • Electrical connection: M12, 5-pole
  • Sensor connection: M12, 8-pole
  • Configuration: Software
  • Material: PBT-GF 30
  • Protection class: IP65

Insertion Thermometer HART

Insertion Thermometer HART

type: MKTS-EL | ID: WL

technical features

  • Input: Pt100 3-wire / type K / type K with display
  • Measuring range: -50...+400 °C maximum
  • Accuracy transmitter: 0,3% of range
  • Accuracy RTD Pt100: Class A, Class AA, Class B
  • Output: with transmitter HART / without transmitter
  • Resolution: 16 bit
  • Configuration: via software (HART communication)
  • Connection: Several plugs, cable
  • Length: 500 / 1000 / 1500 / 2000
  • Material: Stainless steel 1.4571, PBT GF30
  • Protection class: At least IP65

Infrared Vehicle Control System

Infrared Vehicle Control System

type: IVCS | ID: VI

technical features

  • Input device: IR remote control
  • IR range: approx. 5 m
  • Output receiver: max. 100 mA
  • Supply receiver: 24 VDC
  • Sensor connection: 3-pole Super Seal (standard)
  • Charging: via charging station (included)
  • Operating temp.: -20...+60 °C
  • Material sensor: PBT-GF30
  • Material receiver: Aluminum
  • Material remote: Polyamide GFR
  • Material charger: Delrin black / sheet steel

Mobile Cable Load Cell

Mobile Cable Load Cell

type: MKWZ | ID: FY

technical features

  • Measurement ranges from 1 t up to 500 t
  • Can be used with standard load lugs
  • Input resistance 700 +-20 Ohm
  • Operating temperature -10...+80 °C
  • Full load output 1,5(+-0,25%) mV/V
  • Accuracy <0,1% vom Endwert
  • Protection class IP66 (load cell) bzw. IP65 (handset display)
  • Robust design