Modular Universal Load Cell SIL3 + PL"e"
type: MULC | ID: CH
technical features
- Sensor input: 1x strain gauge full bridge
(350 ohms) - Function load cell: tension load | compression load | tension and compression load
- Measuring range: 500 kg | 1000 kg | 1500 kg | 3000 kg
- Analog output: 2x 4...20 mA
- Power supply: 24 VDC ±10%
- Accuracy: see data sheet
- Protection: IP54
- Vibration protection: electronics completely potted
- Test input: test pulse 24 VDC, ≤250 Hz
- Material load cell: stainless steel, alloy steel nickel-plated
- Certificates: SIL3, Performance Level "e"
Modular Universal Load Cell Standard
Type: MULC-S | ID: CH
technical features
- Sensor input: load suspension device
- Function load cell: tension load | compression load |
- tension and compression load
- Measuring range: 500 kg | 1000 kg | 1500 kg | 3000 kg
- Output: strain gauge / 4...20 mA
- Supply: 12...40 VDC current loop / bridge supply 10 V
- Accuracy: see technical data
- Protection: IP54
- Vibration protection: electronics completely potted
- Configuration: via superimposed communication
- Material load cell: stainless steel, alloy steel nickel-plated
- Accessories: rod end
Digital indicator bargraph 20 segments
type: MB1 | 72 x 24
technical features
- 20 point bargraph display – NEW: colour: red or green, selectable via decode switch
- minimum installation depth: 32 mm without plug-in screw terminal
- adjustable via HEX switch and push-button
- pre-adjusted input for standard signals 0-10 V and 0/4-20 mA
- free adjustment on the input signal
- 8 different display types adjustable as bar, dot/point or curtain
- free choice of direction and display of centre (e.g. bars starting from the middle of display)
- control of bightness level in stages
- protection class IP65
- plug-in terminal
- optional: switchable colours green/orange, blue/red
Digital indicator bargraph 10 segments
type: MB1 | 48 x 24
technical features
- 10 point bargraph display – NEW: colour: red or green, selectable via decode switch
- minimum installation depth: 30 mm without plug-in screw terminal
- adjustable via HEX switch and push-button
- pre-adjusted input for standard signals 0-10 V and 0/4-20 mA
- free adjustment on the input signal
- 8 different display types adjustable as bar, dot/point or curtain
- free choice of direction and display of centre (e.g. bars starting from the middle of display)
- control of bightness level in stages
- protection class IP65
- plug-in terminal
- optional: switchable colours green/orange, blue/red
Digital indicator set-point adjuster,
digit height 10 mm
type: M3-7G | 48 x 24
technical features
- red display of -19999…99999 digits (optional green, orange, or blue display)
- minimal installation depth: 90 mm without plug-in terminal
- definable setting for the setpoint
- configurable output area between 0…10 V or 0…20 mA
- adjustable increment per press
- display flashing at threshold exceedance / undercut
- digital inputs for key switch or external adjustment buttons
- configurable as a code for the setpoint adjustment protection
- different operation variants for the control setpoint
- optional startup behaviour with last setting or default value
- optional speed settings for adjusting the setpoint
- quick response when changing the default value (ramp function)
- programming interlock via access code
- protection class IP65 at the front
- plug-in terminal
- accessories: pc-based configuration-kit PM-TOOL with CD & USB adapter
- on demand: devices for working temperatures of -25°C…60°C or -40°C…80°C
