Differential pressure sensor *'*
type: MIDS | ID: MD
technical features
- Ranges 0…10 mbar, 0…40 mbar or 0…100 mbar
- Potting: electronics potted
- Process connection: 2x hose connection 4 mm
- Output: 4...20 mA
- Configuration: factory configuration via software
- Connection: M12, Super Seal, Deutsch, Bayonet, valve, cable
- Protection: at least degree IP65
Bolt-on strain sensing
type: SMLC | ID: SM
technical features
- Full load output: 1 mV/V / 20 mV/V
- Zero load output : +/-5% of range
- Supply: 10 VDC (bridge)
- Accuracy: 0,25% of range
- Protection: IP65
- Connection: cable, 3m, 4-wire shielded
- Safe overload: 200% of nominal load
- Operation temperature: -30...+70 °C
Pressure sensor standard *'*
type: MEPS-S | ID: OP
technical features
- Pressure: relative, absolute
- Ranges 0...0,1 bar up to 0...1000 bar
- Potting: electronics completely potted
- Material: in contact with medium stainless steel 1.4571
- Process connection: 1/2" / 1/4" / 1/2NPT / 1/4NPT
- Output: 4...20 mA
- Limit value contacts: 2 electronically
- Configuration: with keys/software
- Connection: M12, Super Seal, Deutsch, Bayonet, valve, cable
- Protection: at least degree IP65
Silo load cell
type: SILO | ID: SI
technical features
- Ranges from 1 t up to 75 t
- Output 2mV/V
- Supply voltage 10VDC
- Accuracy below 0,05% of and scale value
- Degree of protection IP68
- Insensitive to off axis loads
- Highly accurate and reliable
- optioanally made of stainless steel
Modular pressure transmitter ***
type: MHPS | ID: HP
technical features
- Pressure: relative, absolute
- Ranges 0...0,1 bar up to 0...1000 bar
- Output: 4...20 mA
- Supply voltage: current loop, 15...30VDC
- Accuracy: 0,25% (0,5%) of span
- Degree of protection: IP65
- Medium contact parts: CrNi steel
- Process connection: 1/2" / 1/4" / 1/2NPT / 1/4NPT / M20x1,5
- Display with programming keys
- Turn down up to 100:1
