Digital load measuring system
type: DLM-HD | ID: LS
technical features
- TÜV approval for use in systems with AK4
- µP-device for simple programming
- 4 resistance strain gauge full-bridge sensors
- 2 adjustable limit switches, relay output with restraint
- Configurable analog output, 0...1(10)v or 0(4)...20mA galvanic insulation
- Interfaces RS232, RS485, Interbus S, LWL, CANbus, Profibus galvanically insulated
- Tare - function
- Redundant construction for limit switch and test equipment, monitoring of sensor break and short circuit
- Accuracy +/- 0,1% of end scale value
Modular conductivity level switch
type: MKCS | ID: MC
technical features
- Input: conductivity
- Medium: non aggressive fluids
- Fitting length: up to 200 mm
- Process connection: several options
- Electrical connection: several options
- Material body: stainless steel 1.4571
- Material insulator: Teflon
- Output: 1 electronic changeover contact or conductivity
- Degree of protection: IP67
Modular and compact level sensor/switch *'*
type: MKLS | ID: MN
technical features
- Input: conductivity
- Level: 100...2000 mm
- Medium: non aggressive fluids
- Option: with RTD Pt100, 2-wire
- Process connection: several options
- Electrical connection: several options
- Material: stainless steel 1.4571
- Output: 4...20 mA / contacts
- Degree of protection: IP65 (electronics) /
IP 68
Compact level limit value switch
type: FUELL | ID: FG
technical features
- For bulk goods with relative dielectric constant >2,5)
- Range of temperature for medium: 0...+400°C
- Voltage supply: 21...250 V AC/DC
- Output: 1 potential free change over contact
- Process connection: DIN flange DN100
- Nearly no wear and maintenance free
- Mounting: all silos and hoppers
Modular and compact flow sensors
type: MKFS | ID: MF
technical features
- Flow rate: 0...25 m/s (gases)
- Output: 4...20 mA / 0...20 mA / 0...10 V
- Supply: 24 VDC
- Process connection: several options possible
- Interface: RS232 (optionally, Adaptor necessary)
- Elektrical connection: several option possible
- Thermowell and case: stainless steel 1.4571
- Standard thermowell: 6x0,5 mm
