The safety standards authority Rhineland group has certificated the Müller Industrie-Elektronik GmbH for the introduction and use of the quality management system to German Institute for Standardization DIN EN ISO 9001:2015 and is approving the implementation in the company in regularly taking place audits. Besides, become processes which serve to fulfil optimally customer standards, over and over again anew looked and valued. Important enterprise aims of the Müller Industrie-Elektronik GmbH form a continuous improvement of these processes and the adjustment of the enterprise on the needs of the customer.


Certificate "Product Safety, SIL/PL Capability" (SIL3/PLe products according A-FS, Automation – Functional Safety)

  • Certification according: EN ISO 13849-1:2008 + AC:2009 | EN 62061:2005 + AC:2010 + A1:2013 | IEC 61508 Parts 1-7:2010 (in extracts)
  • Product category: Meas. amplifier SMM "Safety-Mess-Modul SIL3"
  • SMM-HD | SMM-DR | SMM-MULC
  • Notice - No.: 968/FSP 1102.00/15
  • Audit report number.: 968/FSP 1102.00/15
  • Date of issue: 2015-05-20
  • Valid to: until 2020-05-20
  • First certification: 2015
  • Realization: TÜV Rheinland Industrie Service GmbH

Certificate "Produkt Safety, SIL/PL Capability"

Certificate (Müller Industrie-Elektronik)
according to DIN EN ISO 9001:2015

  • Certification according: DIN EN ISO 9001:2015
  • Registration - No. 1: 01 100 050160
  • Registration - No. 2: 01 100 050160/02
  • Report: 01 102 050160 Rev. 20170301
  • Certification: from 05.09.2017
  • Validity: until 29.09.2020
  • First certification: 2005
  • Realization: TÜV Rheinland Group

Certificate according to DIN EN ISO 9001:2015

Certificate (mmc AG)
according to DIN EN ISO 9001:2015

  • Certification according: DIN EN ISO 9001:2015
  • Registration - No. 1: 01 100 050160
  • Registration - No. 2: 01 100 050160/02
  • Report: 01 102 050160 Rev. 20170301
  • Certification: from 05.09.2017
  • Validity: until 29.09.2020
  • First certification: 2005
  • Realization: TÜV Rheinland Group

Certificate according to DIN EN ISO 9001:2015 Certificate according to DIN EN ISO 9001:2015 1 Certificate according to DIN EN ISO 9001:2015 2

Certificate "Kraftfahrt"
according to DIN EN ISO 9001:2015

  • Certification according: DIN EN ISO 9001:2015
  • Product category: ESA (electrical sub-assemblies)
  • Registration - No.: 01 102 050160
  • Report: 01 102 050160 -RA3
  • Certification: from 21.09.2017
  • Validity: until 28.09.2020
  • First certification: 2008
  • Realization: TÜV Rheinland Group

Certificate "Kraftfahrt" according to ISO 9001: 2015

Certificate "Ex products"
according to 2014/34/EU

  • Certification according: Directive 2014/34/EU
  • Product category: Ignition protection Intrinsic safety "i"
  • Notice - No.: TÜV 14 ATEX 140502 Q
  • Audit report number: 14 202 140502
  • Date of issue: 2017-05-17
  • Valid to: until 2020-04-29
  • First certification: 2008
  • Realization: Notified identification number 0044 (TÜV NORD CERT GmbH)

Certificate "EX-Products" according to 2014/34/EU

Certificate "Ex products"
according to IECEx OD/005

  • Certification according to: IECEx OD/005
  • Product category: Ignition protection Intrinsic safety "i"
  • Notice - No.: 14 216 142083
  • Audit report number: 14 216 142083
  • Date of issue: 2017-05-17
  • Valid to: until 2020-04-29
  • First certification: 2014
  • Realization: Notified identification number 0044 (TÜV NORD CERT GmbH)

Certificate "EX-Products" according to IECEx OD/005

Certificate "Range of Load Cells"
according to Sira 15ATEX2001

  • Certification according: Sira 15ATEX2001 Issue 0
  • Product category: Ignition protection Intrinsic safety "i"
  • Project Number: 70017865
  • Report Number: Form 9404 Issue 3
  • Date of issue: 03-2015
  • First certification: 2015
  • Realization: Sira Certification Service
    Rake Lane, Eccleston, Chester, CH4 9JN, England

Certificate "Range of Load Cells" according to Sira 15ATEX2001

Restamping Authorization of materials/products corresponding to § 2 (2a) Equipment Safety Act.

  • Müller Industrie-Elektronik has the authority to restamp from TÜV NORD Systems and offers proof of the "restamping" of materials and products to customers who produce installations subject to surveillance corresponding to § 2 (2a) Equipment Safety Act.
  • Approval: TÜV Nord Systems GmbH & Co. KG
  • TÜV-Az: 1042W2097150
  • Date of issue: 15.09.2017
  • First certification: 01.09.2013
  • Valid to: September 2020

Restamping authorization according to § 2 (2a) Equipment Safety Act