force measurement
YourSolution|OEM-Sensors
 

YourSolution | OEM Sensors - in a few steps!

Müller Industrie-Elektronik is your competent partner for customized solutions: YourSolution, when it comes to low-cost OEM sensors in series production. Fast, flexible, reliable and any desired component or sensor type! With our in-house development department we implement OEM sensors for you as individual YourSolution in just a few steps.

 

Mobile telemetrie load cell

Mobile telemetrie load cell

type: MFWZ | ID: FW

technical features

  • Ranges from 1t up to 500t
  • For use with standard lifting shackles
  • Distance 120m
  • Auto power down
  • Up to 255 links can be used
  • Accuracy 0,2% of end scale value
  • Degree of protection IP67 (load cell) respectively IP65 (hand held display)
  • Robust constuction

Mobile Cable Load Cell

Mobile Cable Load Cell

type: MKWZ | ID: FY

technical features

  • Measurement ranges from 1 t up to 500 t
  • Can be used with standard load lugs
  • Input resistance 700 +-20 Ohm
  • Operating temperature -10...+80 °C
  • Full load output 1,5(+-0,25%) mV/V
  • Accuracy <0,1% vom Endwert
  • Protection class IP66 (load cell) bzw. IP65 (handset display)
  • Robust design

Modular Universal Load Cell SIL3 + PL"e"

Modular Universal Load Cell SIL3 + PL"e"

type: MULC | ID: CH

technical features

  • Sensor input: 1x strain gauge full bridge
    (350 ohms)
  • Function load cell: tension load | compression load | tension and compression load
  • Measuring range: 500 kg | 1000 kg | 1500 kg | 3000 kg
  • Analog output: 2x 4...20 mA
  • Power supply: 24 VDC ±10%
  • Accuracy: see data sheet
  • Protection: IP54
  • Vibration protection: electronics completely potted
  • Test input: test pulse 24 VDC, ≤250 Hz
  • Material load cell: stainless steel, alloy steel nickel-plated
  • Certificates: SIL3, Performance Level "e"

Modulare Universal - Load Cell HART

Modular Universal - Load Cell Standard HART

Type: MULC-S | ID: CH

technical features

  • Sensor input: load suspension device
  • Function load cell: tension load | compression load |
  • tension and compression load
  • Measuring range: 500 kg | 1000 kg | 1500 kg |  3000 kg
  • Output: strain gauge / 4...20 mA HART
  • Supply: 12...40 VDC current loop / bridge supply 10 V
  • Accuracy: see technical data
  • Protection: IP54
  • Vibration protection: electronics completely potted
  • Configuration: via superimposed HART communication
  • Material load cell: stainless steel, alloy steel nickel-plated
  • Accessories: rod end

Low Profile Load Cell Assembly

Low Profile Load Cell Assembly

type: SILO-V | ID: LP

technical features

  • Ranges: 0...1000 up to 0...30000 kg
  • Output: 2,0 ±0,1% mV/V
  • Voltage supply: 10 VDC (standard)
  • Accuracy: < ±0,05% of range (combined error)
  • Output resistance: 700 ±5 Ω
  • Temperature range: -30...+70 °C (working)
  • Insulation resistance: > 5000 MΩ
  • Safe overload: 150% of range
  • Material load cell: stainless steel 1.4021 / AISI 420
  • Protection: IP68
  • Cable length: standard 10 m

Annular load cell

Annular load cell

type: FOWA-1 | ID: FO

technical features

  • Nominal load: 10 kN up to 200 kN
  • Output: strain gauge full bridge, 1 mV/V
  • Voltage supply: 10 VDC
  • Accuracy: +/- 0,5% of range
  • Temperature range: -20...+80 °C
  • Safe overload: 150% of nominal range
  • Material: stainless steel ARMCO 17-4PH
  • Protection: IP66
  • Connection: 3 m cable

Force transducer for serapid linklift series

Force transducer for serapid linklift series

type: SER-LO | ID: SL

technical features

  • Ranges: 20 / 30 / 70 / 100 kN
  • Output: 0,5...1 mV/V
  • Combined error: 2,5% of range
  • Protection: IP67
  • Material: stainless steel ARMCO 17-4PH
  • Safe overload: 150% of range
  • Operating temperature: -20...+70 °C
  • Connection: plug M12, 5-pole

Bolt-on strain sensing

Bolt-on strain sensing

type: SMLC | ID: SM

technical features

  • Full load output: 1 mV/V / 20 mV/V
  • Zero load output : +/-5% of range
  • Supply: 10 VDC (bridge)
  • Accuracy: 0,25% of range
  • Protection: IP65
  • Connection: cable, 3m, 4-wire shielded
  • Safe overload: 200% of nominal load
  • Operation temperature: -30...+70 °C

Silo load cell

Silo load cell

type: SILO | ID: SI

technical features

  • Ranges from 1 t up to 75 t
  • Output 2mV/V
  • Supply voltage 10VDC
  • Accuracy below 0,05% of and scale value
  • Degree of protection IP68
  • Insensitive to off axis loads
  • Highly accurate and reliable
  • optioanally made of stainless steel

Bending beam load cell

Bending beam load cell

type: BSW11 | ID: CE

technical features

  • Rated load: 5...500kg
  • Output: 2mV/V
  • Supply voltage: 10VDC
  • Accuracy: +/- 0,02% of end scale value
  • Degree of protection: IP67
  • Material: alloy steel / stainless steel
  • Connection: 3 m cable, 4-wire

Tension load cell

Tension load cell

type: WAEGEZ | ID: KS

technical features

  • Standard capacity from 100kg (250lb) to 5000kg (20klb)
  • S-shaped tension load cell for simple mounting
  • High alloy tool steel, nickel plated or stainless steel design
  • Particularly suitable for parallel connection
  • Optimal cost-performance ratio
  • Degree of protection IP66
  • Accuracy 0,02% end of scale value

Load cell

Load cell

type: SPW6E | ID: CS

technical features

  • Rated load 50kg up to 300kg
  • Output 2mV/V
  • Supply voltage 10VDC
  • Accuracy +/- 0,02% of end scale value
  • Degree of protection IP67
  • Recommended plattform size 400 x 400mm
  • High resistance to lateral loads
  • Highly accurate and reliable

Shear force transducer

Shear force transducer

type: SKA8C | ID: CA

technical features

  • Material: alloy steel / stainless steel / aluminium alloy
  • Rated load: 20...10000 kg
  • Output: 2 mV/V
  • Supply voltage: 10 VDC
  • Accuracy: +/- 0,02% FS
  • Degree of protection: IP66 / IP67
  • Connection: 3 m / 6 m cable, 4-wire shielded

Load measuring pin

Load measuring pin

type: LASTMB | ID: LL

technical features

  • For existing installations without mechanical modification
  • Ranges 0...100kg up to 0...2000t
  • Output full-bridge resistance strain gauge or 0...10V, 0(4)...20mA
  • Degree of protection IP65, optional up to IP68
  • Output is temperature linear
  • Accuracy up to 0,1% of end scale value
  • Every dimension available

Compression load cell

Compression load cell

type: DKW14B | ID: CW

technical features

  • Nominal load: 0,1 t up to 30 t
  • Output: strain gauge full bridge, 2 mV/V
  • Voltage supply: 9...12 VDC
  • Accuracy: +/- 0,2% of range
  • Temperature range: -20...+55 °C
  • Safe overload: 120% of nominal range
  • Material: alloy steel
  • Protection: IP66
  • Connection: 3 m cable

Compression load cell

Compression load cell

type: DKW14 | ID: CV

technical features

  • Capacity 1 kN up to 1000 kN
  • Output strain gauge full bridge, 2 mV/V
  • Supply voltage 10 VDC
  • Accuracy +/- 0,1% of end scale value
  • Degree of protection IP67
  • Low height
  • Application of force with adaptor
  • Connection with cable, MIL-plug, Cannon-plug, RSF4-plug

Plattform load cell

Plattform load cell

type: PL-WZ | ID: PW

technical features

  • Ranges: 0...3 up to 0...200 kg
  • Applications: OEM
  • Output: 2mV/V
  • Material: aluminium alloy
  • Connection: cable 420 mm, 4-wire
  • ccuracy: 0,2% of range
  • Protection: IP65

Digital load measuring system

Digital load measuring system

type: DLMHD | ID: LS

technical features

  • TÜV approval for use in systems with AK4
  • µP-device for simple programming
  • 4 resistance strain gauge full-bridge sensors
  • 2 adjustable limit switches, relay output with restraint
  • Configurable analog output, 0...1(10)v or 0(4)...20mA galvanic insulation
  • Interfaces RS232, RS485, Interbus S, LWL, CANbus, Profibus galvanically insulated
  • Tare - function
  • Redundant construction for limit switch and test equipment, monitoring of sensor break and short circuit
  • Accuracy +/- 0,1% of end scale value

products "Made in Germany"


Müller Industrie-Elektronik manufactures measuring devices, sensors, transmitters, limit switches, calibrators and digital displays for industrial measuring and control technology, transmitters and amplifiers for signal processing, display devices and evaluation instruments in the region Hannover at the company location Neustadt am Rübenberge. Services such as contract manufacturing, board production, cable assembly, 3D construction, prototype construction and measuring device calibration complete the extensive product portfolio.