Strain gauge amplifier HART

Strain gauge amplifier HART

type: MISG | ID: MJ

technical features

  • Input strain gauge: 1 full bridge, 4-wire
  • Input sensitivity: 1...4 mV/V
  • Output: 4...20 mA HART
  • Voltage supply: 12...40 VDC
  • Resolution: 16 bit
  • Combined error: 0,3% of range
  • Bridge supply: 1 VDC
  • Protection: at least IP65
  • Configuration: Software with HART communication

Differential pressure sensor HART

Relative Pressure Transmitter HART

type: MIPS | ID: MO

technical features

  • Input: pressure 0...10 mbar up to 0...1 bar
  • Output: 4...20 mA current loop HART (2-wire)
  • Voltage supply: out of current loop (12...40 VDC)
  • Accuracy: see technical details
  • Process connection: 1x hose connection
  • Medium: clean dry air, dry gases
  • Electrical connection: several plugs / cable
  • Temperature range: -20...+80 °C (operation)
  • Adjustment: software
  • Material enclosure: PBT GF 30
  • Protection: at least IP65

Differential pressure sensor HART

Differential pressure sensor HART

type: MIDS | ID: MD

technical features

  • Ranges 0…10 mbar, 0…40 mbar or 0…100 mbar
  • Potting: electronics potted
  • Process connection: 2x hose connection 4 mm
  • Output: 4...20 mA HART
  • Configuration: factory configuration via software
  • Connection: M12, Super Seal, Deutsch, Bayonet, valve, cable
  • Protection: at least degree IP65

room temperature sensor HART

Room temperature sensor HART

Type: MITS | ID: MR

technical features

  • Sensor: RTD Pt100, Pt1000, 2-, 3-, 4-wire
  • Enclosure: inside completely potted
  • Protecting tube: stainless steel 1.4571
  • Range: -30...+60 °C
  • Option: transmitter 4...20 mA HART
  • Connection: MIL plug, valve plug, M12x1, cable
  • Protection: at least IP65

MI series: modular inline sensors

The product series "Modular Inline Sensors" is characterized by an innovative housing concept with minimized size and enables measurement solutions in the smallest space. The MI series serves almost all physical parameters such as pressure, differential pressure, flow, humidity, level, temperature and inclination. Due to the extremely space-saving design, the MI series is particularly suitable for applications in limited space such as refurbishments or functional extensions of industrial plants, for use in mechanical and plant engineering and for applications in vehicle control technology or in special vehicle construction.

products "Made in Germany"

Müller Industrie-Elektronik manufactures measuring devices, sensors, transmitters, limit switches, calibrators and digital displays for industrial measuring and control technology, transmitters and amplifiers for signal processing, display devices and evaluation instruments in the region Hannover at the company location Neustadt am Rübenberge. Services such as contract manufacturing, board production, cable assembly, 3D construction, prototype construction and measuring device calibration complete the extensive product portfolio.