temperature transmitter
Transmitter temperature IO-Link

Transmitter temperature IO-Link

type: TH-TIO | ID: TI

technical features

  • Input RTD Pt100: 3-wire / -200...800 °C
  • Input Type J: -210...1200 °C
  • Input Type K: -200...1372 °C
  • Input Type N: -200...1300 °C
  • Accuracy: max. 0,3% of nominal range
  • Operating temperature: -20...+80 °C
  • Configuration: IO-Link interface
  • Connection: Terminal screws
  • Protection: IP20
  • Dimensions: Ø45x23 mm
  • Casing: Synthetics PA66

Universal transmitter

universal transmitter

Typ: MH-1U | ID: ▒

technical features

  • measuring input: direct voltage, direct current, Pt100(0), thermocouple, frequency,
    rotational speed, counter
  • display: red display of -199…999 digits
  • digit height approx. 7mm
  • min/max value recording
  • 9 adjustable supporting points
  • display flashing at threshold value exceedance / threshold value undercut
  • Tara function
  • programming interlock via access code
  • pluggable screw-terminal
  • optional: analog output 0-10 VDC, 0/4-20 mA switchable
  • optional: interfaces RS232 / RS485 / Bluetooth
  • optional: sensor supply incl. digital input
  • optional: 2 relay outputs / 2 PhotoMos-outputs / 2 relay outputs & 2 PhotoMos-outputs
  • optional: Bluetooth interface
  • optional: data logger
  • accessories: PC-based configuration kit PM-TOOL with CD & USB adapter

Digital temperature transmitter

Digital temperature transmitter

type: DTT | ID: DY

technical features

  • Input: 1x thermocouple type K (standard)
  • Output: 4...20 mA current loop 2-wire
  • Supply: 10...35 VDC
  • Temperature range: -40...+85 °C
  • Material casing: Plastics, PBT, glas-fiber-reinforced
  • Electrical connection: Solid wire, stranded wire with wire end ferrule
  • Protection class: IP00 / IP20
  • Ex certificates: ATEX, IECEx (option)
  • Cert. (on request): EAC (EMC), Uzstandard

Temperature limit value switch HART

Temperature limit value switch HART

type: TGS2 | ID: TG

technical features

  • Input RTD Pt100: 2-wire / -50...500 °C
  • Thermocouple type K: NiCr-Ni / -50..1..200 °C
  • Output: Relay contact (NC or NO)
  • Supply: 24 VDC
  • Accuracy: 0,3% of nominal range
  • Operation temperature: -20...+80 °C
  • Configuration: HART interface, magnet
  • Connection: Terminal screws
  • Protection: IP20
  • Dimensions: Ø45x23 mm
  • Enclosure: Synthetics PA66

Digital temperature transmitter

Digital temperature transmitter

type: DTW | ID: DX

technical features

  • Input RTD Pt100:1x Pt100, 2-, 3-, 4-wire
  • Input RTD Pt1000: 1x Pt1000, 2-, 3-, 4-wire
  • Input Potentiometer: Reed-chains, 3-wire
  • Output: 4 mA...20 mAcurrent loop 2-wire
  • Power supply: 8...35 VDC
  • Temperature range: -40...+85 °C
  • Casing material: Plastic, plastic PBT , glass fibre reinforced
  • Electrical connection: Solid wire, cord with end splice
  • Protection category: I P00 / I P20

Transmitter Resistance Thermometer HART

Transmitter Resistance Thermometer HART

type: TH-RTD | ID: ▒

technical features

  • Input RTD: Pt100, Pt1000
  • Output: 4...20 mA current loop
  • Supply: 12...40 VDC out of current loop
  • Accuracy: 0,3% of nominal range
  • Configuration: HART-interface
  • Connection: Terminal screws
  • Protection: IP20
  • Dimensions: d=45x23 mm
  • Enclosure: Synthetics black

RFID Programmer

RFID Programmer

type: DEV-RP | ID: ▒

technical features

  • Programming device for setting ISO 15693-compatible target devices
  • for connection to Windows PC with XP and newer
  • Management programm allows three functions:
  • Reading mode: read converter
  • Writing mode: Write parameters in converterEditing mode: Set parameters for the first time
  • Editing mode: Set parameters for the first time

RFID programmable transmitter resistance thermometer

RFID programmable transmitter thermocouple

type: TP-TC | ID: ▒

technical features

  • Input: thermocouple
  • Output: 4...20 mA current loop (2-wire)
  • freely programmable features
  • with setup program LabSoftView for windows
  • max transmission error greater between 0,1% f.s. or 0,2°C
  • Degree of protection IP 20 (IP 54/66, when using terminal head)
  • for use with terminal head form B

RFID programmable transmitter resistance thermometer

RFID programmable transmitter resistance thermometer

type: TP-RTD | ID: ▒

technical features

  • Input: resistance thermometer, Pt100, Pt1000, Ni100
  • Output: 4...20 mA current loop (2-wire)
  • freely programmable features
  • with setup program LabSoftView for windows
  • max transmission error greater between 0,1% f.s. or 0,2°C
  • Degree of protection IP 20 (IP 54/66, when using terminal head)
  • for use with terminal head form B

Modular temperature transmitter HART

Modular temperature transmitter HART

type: MHTT | ID: HM

technical features

  • Input: RTD / TC / voltage (mV)/ resistance (potentiometer)
  • Output: 4...20 mA current loop, HART protocol
  • Supply: 15...45 VDC out of current loop
  • Accuracy: 0,08...0,12% of range
  • Indication: LCD display (backlighting)
  • Galvanical insulation: input / output
  • Settings: with software via HART-protocol
  • Enclosure: diecast aluminium

Double RTD transmitter

Double RTD transmitter

type: DRMU-W | ID: BW

technical features

  • Input: 2x RTD Pt100, 3-wire
  • Output: 2x 4...20 mA (Current loop)
  • Voltage supply: 2x 10...35 VDC
  • Mounting: on top hat rail
  • Temperature ranges: within -50...+400 °C
  • Accuracy: at least 0,5% of range
  • Protection: IP20
  • Enclosure: DR22,5 made of plastic PA66 GF30
  • Connection: plug-in terminal strips

Programmable measuring amplifier

Programmable measuring amplifier

type: PMR10 | ID: PM

technical features

  • Input: RTD -100...+850°C, TC -100...+1800°C, resistance and potentiometer 10ohm...10kOhm
  • Configuration: PC with programming software and interface
  • Output 0...20mA, -10...+10V, pulse or relay output
  • Supply voltage 24, 115, 230, 400VAC, or 12...50VDC
  • Galvanic separation

products "Made in Germany"

Müller Industrie-Elektronik manufactures measuring devices, sensors, transmitters, limit switches, calibrators and digital displays for industrial measuring and control technology, transmitters and amplifiers for signal processing, display devices and evaluation instruments in the region Hannover at the company location Neustadt am Rübenberge. Services such as contract manufacturing, board production, cable assembly, 3D construction, prototype construction and measuring device calibration complete the extensive product portfolio.