Transmitter OEM
Analog Transmitter Universal OEM

Analog Transmitter Universal OEM

Typ: MATU | ID: GD

Technical Features

  • Input: variable (programmable)
  • Output: 4…20 mA (2-wire / 3-wire)
  • Voltage output: 3-wire-only, multiple options
  • Digital I/Os: 3x
  • Measurement ranges: adjustable (programmable)
  • Resolution: 24 bit
  • Accuracy: max. 0,1% of nominal range
  • Operating temperature: -40…+85 °C
  • Connection: soldering pads
  • Dimensions: 35x18x4 mm / 31,4x28,6x4,8 mm
  • Supply: 9…35 VDC / 12…35 VDC (volt output)

Configurator Modem Analog

Configurator Modem Analog

Type: DEV-KMA | ID: DK

Technical Features

  • PC interface: virtual serial port
  • Supply: out of USB connection
  • Current consumption: max. 350 mA
  • Connection transmitter: alligator clamps / M12, 4-pole
  • Connection PC: USB type A
  • Connection multimeter: bunch plugs
  • USB specification: 2.0 compatible
  • Protection: IP20
  • Case: ABS, 82x51x17 mm
  • Operating systems: Windows XP , Win 7, Win 8, Win 10
  • Software (included): TrComm

Transmitter Temperature IO-Link

type: MCTT-E | ID: QA

technical features

  • Input Pt100: 3-wire / -200...800 °C
  • Input Type J: -210...1200 °C
  • Input Type K: -200...1372 °C
  • Input Type N: -200...1300 °C
  • Accuracy: max. 0,05% of nominal range
  • Operating temperature: -20...+80 °C
  • Configuration: IO-Link interface
  • Connection: Soldering pads
  • Protection class: IP00
  • Dimensions: 40 x 17 mm
  • Casing: none

OEM Transmitter 1-channel IO-Link

OEM Transmitter 1-channel IO-Link

Typ: MCUT-E | ID: NK

Technical features

  • Input: Strain gauge full bridge
  • Filter setting: 0,5 s
  • Output: IO-Link interface
  • Resolution: 16 bit
  • Accuracy: max. 0,05% of nominal range
  • Operating temperature: -20...+85 °C
  • Connection: Soldering pads
  • Protection class: IP00
  • Material: FR4, PBT
  • Dimensions: 40x17x8,25 mm
  • Supply: 24 VDC

OEM Transmitter 2-channel IO-Link

OEM Transmitter 2-channel IO-Link

type: MEUT-E | ID: NV

technical features

  • Input channel 1: Strain gauge full bridge
  • Input channel 2: Universal
  • Output: IO-Link Interface
  • Resolution: 16 bit / 24 bit
  • Accuracy: max. 0,05% of nominal range
  • Operating temperature: -20…+85 °C
  • Protection class: IP00
  • Dimensions: 40x17x8,25 mm
  • Supply: 24 VDC

OEM Transmitter Temperatur HART

OEM Transmitter Temperature HART

type: MART-R | ID: ▒

technical features

  • Input: multiple, see data sheet
  • Measurement rate: 100 measurements/s
  • Material PCB: FR4, PBT (electronics fully potted)
  • Output: 4...20 mA HART (2-wire)
  • Resolution: 16 bit
  • Switch-on delay: <5 s
  • Gross error: 0,3% of range

OEM Transmitter Temperatur HART

OEM Transmitter Temperature HART

type: MART-E | ID: ▒

technical features

  • Input: multiple, see data sheet
  • Measurement rate: 100 measurements/s
  • Material PCB: FR4, PBT (electronics fully potted)
  • Output: 4...20 mA HART (2-wire)
  • Resolution: 16 bit
  • Switch-on delay: <5 s
  • Gross error: 0,3% of range

OEM Tranmitter DMS HART

OEM Transmitter Strain Gauge HART

type: MASG-R | ID: ▒

technical features

  • Input: 1 strain gauge bridge, 4-wire
  • Bridge resistance: minimal 300 Ohm
  • Sensititivy: 1...4 mV/V
  • Output: 4...20 mA HART (2-wire)
  • Resolution: 16 bit
  • Strain gauge supply: 1 VDC
  • Gross error: 0,3% of range

OEM Transmitter DMS HART

OEM Transmitter Strain Gauge HART

type: MASG-E | ID: ▒

technical features

  • Input: 1 strain gauge bridge, 4-wire
  • Bridge resistance: minimal 300 Ohm
  • Sensititivy: 1...4 mV/V
  • Output: 4...20 mA HART (2-wire)
  • Resolution: 16 bit
  • Strain gauge supply: 1 VDC
  • Gross error: 0,3% of range

HART-Modem USB

HART-Modem USB

Type: DEV-HM | ID: --

technical features

  • Active operation: current loop is supplied too
  • Passive operation: used in an existing current loop
  • PC interface: virtual serial port
  • Supply: out of USB connection
  • USB specification: 2.0 compatiblel
  • Protection: IP20
  • Galvanical insulation: between USB and HART
  • Case: ABS, 105x66x20 mm

Products "Made in Germany"


Müller Industrie-Elektronik manufactures measuring devices, sensors, transmitters, limit switches, calibrators and digital displays for industrial measuring and control technology, transmitters and amplifiers for signal processing, display devices and evaluation instruments in the region Hannover at the company location Neustadt am Rübenberge. Services such as contract manufacturing, board production, cable assembly, 3D construction, prototype construction and measuring device calibration complete the extensive product portfolio.