Temperature Measurement
Vibration Sensor IO-Link
type: MKVS | ID: ZM
technical features
- Input: Vibrations, temperature
- Outputs: IO-Link / analogue / switch contact
- Supply: 18…30 VDC
- Current consumption: max. 700 mA
- Frequency range: 10…1000 Hz
- Accuracy: see Technical Data
- Electrical connection: Plug M12, 4-pole
- max. acceleration: ±15 g
- Switching contacts: Low Active / High Active
- Casing material: Stainless steel V2A (1.4305)
- Service life: 10 years
Modular compact temperature sensor Ex
type: MKTS-Ex| ID: GN
technical features
- Input: RTD Pt 100 / Pt 1000
- Measurement range: -50…+200 °C maximum
- Supply: 12…30 VDC
- Accuracy RTD Pt100(0): Class A
- Output: several, see Technical Data
- Resolution: 24 bit
- Configuration: via software (TrComm)
- Connection: several plugs, cable
- Explosion protection: ATEX, IECEx
- Material: stainless steel 1.4571, PBT GF30
- Protection class: at least IP65
Screw-in resistance temperature sensor Ex
Typ: METS-WTEx | ID: GF
technical features
- Input: Pt100 (maximum span: -50…+200 °C)
- Output: 4…20 mA, 2-wire / 0…10 V, 3-wire
- Voltage supply: 12…30 VDC
- Accuracy: see technical data
- Process connection: several options
- Electr. connection: Lateral / Option: Top
- Electr. connection: several plugs / cable
- Temperature range: -50…+425 °C (environment)
- Explosion protection: ATEX, IECEx
- Material: Stainless steel 1.4571 (medium contact)
- Protection class: at least IP65
Modular compact temperature sensor IO-Link
type: MKTS-IO| ID: MX
technical features
- Input: Pt 100 / thermocouple type J / K / N
- Measurement range: -50…+200 °C maximum
- Accuracy transmitter: max. 0,02% of range
- Operating temperature: -20…+80 °C
- Output: IO-Link
- Resolution: 16 bit
- Configuration: via software (IO-Link interface)
- Electrical connection: Several plugs, cable
- Internal protection: Inside completely potted
- Material: Stainless steel 1.4571, PBT GF30
- Protection class: At least IP65
Standard temperature sensor
Typ: STS | ID: ▒
technical features
- Sensor element: RTD Pt100, 4-wire, Class A
- Schutz: body of case completely potted
- Material: stainless steel 1.4571
- Process connection: compression fitting 1/4" and 1/2"
- Output: RTD Pt100 on connection plug
- Electrical connection: M12x1, 4-pole
- Temperature medium: -20…150 °C
- System pressure:10 bar
- Protection: IP67
Temperature Sensor Hygiene *'*
type: MHY-TS | ID: VH
technical features
- Input: RTD Pt 100, Pt 1000
- Measurement range: -50...+200 °C maximum
- Accuracy transmitter: 0,3% of range
- Accuracy RTD Pt100(0): Class A, Class AA, Class B
- Output: 4...20 mA / RTD / CANopen
- Resolution: 16 bit
- Configuration: Via software
- Electrical connection: M12 4-pole, M12 8-pole
- Internal protection: Inside potted completely
- Material: Stainless steel 1.4571
- Protection class: At least IP65
Modular compact temperature sensor *'*
type: MKTS | ID: MK
technical features
- Measuring element as Pt 100, Pt 1000, 2-, 3-, 4-wire
- Inside of case completely potted
- Protection tube and case are made of stainless steel 1.4571
- Process terminal thread 1/4", 3/8", 1/2", 3/4", 1/4" NPT, 3/8" NPT, 1/2" NPT
- optional transmitter 4...20 mA, programmable
- Cable connection with plug MIL D38999, valve plug DIN EN 175301-803,
- RSE4 compatible plug M12x1, cable entry M12x1,5 with cable
- Degree of protection IP 67
Modular compact temperature sensor with GL-approval
type: MKTS-GL | ID: MK
technical features
- Measuring element as Pt 100, Pt 1000, 2-, 3-, 4-wire
- Inside of case completely potted
- Protection tube and case are made of stainless steel 1.4571
- Process terminal thread 1/4", 3/8", 1/2", 3/4", 1/4" NPT, 3/8" NPT, 1/2" NPT
- optional transmitter 4...20 mA, programmable
- Cable connection with plug MIL D38999, valve plug DIN EN 175301-803,
- RSE4 compatible plug M12x1, cable entry M12x1,5 with cable
- Degree of protection IP 67
Modular temperature switch
type: MKTL | ID: ML
technical features
- Switching temperature: 5...180 °C
- Switching element: bimetal, creep action
- Contact: normally closed, normally open
- Length: 27...1000 mm
- Material: thermowell, body stainless steel 1.4571
- Process connection: 3/8", 1/2", 3/4", 1", 3/8" NPT, 1/2" NPT
- Accuracy: +/- 5 K
- Connection: several plugs, cable
- Protection: at least IP 65
Hand-held temperature sensor *'*
Type: MKTS-HA | ID: MH
Technische Features
- Measuring element: RTD Pt 100(0), 2-, 3-, 4-wire
- Accuracy: Class A, B, B 1/2 DIN
- Output: RTD Pt100(0), 4...20 mA, interface
- Enclosure inside completely potted
- Protecting tube and handle made of stainless steel 1.4571
- Process connection: tip of tube flat, pointed
- Length of tube: 50...1000 mm
- Connection: several plugs, cable
- Protection: IP65
Insertion Thermometer
type: MKTS-EL | ID: WL
Technical Features
- Input: Pt100 3-wire / type K / type K with display
- Measuring range: -50...+400 °C maximum
- Accuracy transmitter: 0,3% of range
- Accuracy RTD Pt100: Class A, Class AA, Class B
- Output: with transmitter / without transmitter
- Resolution: 16 bit
- Configuration: via software
- Connection: Several plugs, cable
- Length: 500 / 1000 / 1500 / 2000
- Material: Stainless steel 1.4571, PBT GF30
- Protection class: At least IP65
Modular temperature sensors with spring *'*
type: MKTS-SP | ID: MK
technical features
- Input: RTD Pt100, Pt1000 | Type K cross-band sensor
- Connection: 2-wire | 3-wire | 4-wire
- Measuring range: -50...+150 °C maximum
- Accuracy transmitter: 0,3% of range
- Accuracy RTD PT100: Class A, Class AA, Class B
- Output: 4...20 mA RTD
- Resolution: 16 bit
- Configuration: via software
- Internal protection: inside completely potted
- Material: stainless steel 1.4571, PBT GF30
- Protection: at least IP65
Modular temperature sensors with spring IO-Link
type: MKTS-SPIO | ID: MY
technical features
- Input: Pt100 / Thermocouple Type J/K/N
- Measurement range: -50...+150 °C
- Accuracy transmitter: max. 0,05% of range
- Operating temperature: -20...+80 °C
- Output: IO-Link
- Resolution: 16 bit
- Setting: via software (IO-Link interface)
- Electrical connection: M12x1, 4-pole
- Internal protection: inside completely potted
- Material: stainless steel 1.4571, PBT GF30
- Protection class: at least IP65
Ventilator control OEM
type: MEFC | ID: KH
technical features
- Input: 12…30 VDC
- Output: 0…16 A (PWM)
- Application areas: oil cooling, water cooling
- Approvals: KBA, CE type-approval certificate No. E1*10R06/01*9229*00
- Medium temperature: max. 120 °C
- Operating temperature: -40…85 °C
- Connection ventilator: Delphi Metri-Pack 280 (female)
- Connection supply: DT04-3P (male)
- Protection class: IP67
- Supply: 12…30 VDC
- Dimensions: approx. 276 x 35 mm
- Weight: approx. 307 g
Magnetic Surface Temperature Sensor Radio
Typ: METS-WRM | ID: YA
technical features
- Input: RTD Pt100 (maximum range -50...+400 °C)
- Output: Radio transceiver
- Voltage supply: Lithium-ion battery pack
- Accuracy: ca. 0,2% FS
- Process connection: clamping magnet
- Electrical connection: Without / M12x1, 4-pole (charge, supply)
- Radio range: internal antenna 20 m / external antenna 100 m radio
- Temperature range: -20...+45...60 °C (ambient)
- Configuration: Factory setting
- Material: Stainless steel 1.5471 (medium contact)
- Protection: At least IP65
Magnetic Surface Temperature Sensor *'*
Typ: METS-WTM | ID: NW
technical features
- Input: RTD Pt100 (maximum range -50...+200 °C)
- Output: 4...20 mA current loop (2-wire)
- Voltage supply: out of current loop (12...40 VDC)
- Accuracy: see technical details
- Process connection: clamping magnet
- Electrical connection: several plugs
- Temperature range: -20...+80 °C (ambient)
- Limit value contacts: 2 electronically (NPN / PNP)
- Adjustment: software
- Material: stainless steel 1.4571 (medium contact)
- Protection: at least IP65
Magnetic Surface Temperature Sensor *'*
Typ: METS-WSM | ID: NX
technical features
- Input: RTD Pt100 (maximum range -50...+200 °C)
- Output: 4...20 mA current loop (2-wire)
- Voltage supply: out of current loop (12...40 VDC)
- Accuracy: see technical details
- Process connection: clamping magnet
- Electrical connection: several plugs
- Temperature range: -20...+80 °C (ambient)
- Limit value contacts: 2 electronically (NPN / PNP)
- Adjustment: keys / software
- Material: stainless steel 1.5471 (medium contact)
- Protection: at least IP65
Screw-in resistance temperature sensor *'*
Typ: METS-WT | ID: OH
technical features
- Measuring element: RTD Pt 100
- Potting: electronics completely potted
- Material: process connection stainless steel 1.4571
- Process connection: 1/4", 3/8", 1/2", 3/4", 1", 1/4" NPT, 3/8" NPT, 1/2" NPT
- Output: 4...20 mA
- Electrical connection: lateral, upwards
- Configuration: software
- Connection: M12, Super Seal, Deutsch, Bayonet, valve, cable
- Protection: at least degree IP65
Screw-in temperature switch
Typ: METL-L | ID: NT
technical features
- Sensor: RTD Pt 100
- Potting: Electronics potted
- Material towards medium: stainless steel 1.4571
- Process connection: 1/4", 3/8", 1/2", 3/4", 1", 1/4" NPT, 3/8" NPT, 1/2" NPT
- Output: open collector, 30 V, 200 mA
- Indication: LED red
- Accuracy: 0,5 °C / 0,2 °C
- Switch point adjustment: with magnet
- Electrical connection: M12x1, 8-pole
- Protection: at least IP65
Screw-in thermocouple temperature sensor *'*
Typ: METS-TS | ID: OS
technical features
- Measuring element: thermocouple type K
- Potting: electronics completely potted
- Material: process connection stainless steel 1.4571
- Process connection: 1/4", 3/8", 1/2", 3/4", 1", 1/4" NPT, 3/8" NPT, 1/2" NPT
- Output: 4...20 mA
- Limit value contacts: 2 electronically
- Configuration: with keys/software
- Connection: M12, Super Seal, Deutsch, Bayonet, valve, cable
- Protection: at least degree IP65
Screw-in resistance temperature sensor
Typ: METS-WS | ID: OR
technical features
- Measuring element: RTD Pt 100
- Potting: electronics completely potted
- Material: process connection stainless steel 1.4571
- Process connection: 1/4", 3/8", 1/2", 3/4", 1", 1/4" NPT, 3/8" NPT, 1/2" NPT
- Output: 4...20 mA
- Limit value contacts: 2 electronically
- Configuration: with keys/software
- Connection: M12, Super Seal, Deutsch, Bayonet, valve, cable
- Protection: at least degree IP65
Screw-in infrared temperature sensor *'*
Typ: METS-IR | ID: OC
technical features
- Measuring element: Infrared radiation
- Maximum range: -40...+ 1000 °C
- Output: 4...20 mA
- Process connection: 1/2", 3/4", 1", 1/2" NPT
- Voltage supply: 24 VDC +/- 10 %
- Limit value contacts: 2 electronically
- Configuration: with keys/software
- Connection: M12 male, 8-pole
- Protection: at least degree IP65
Screw-in resistance temperature sensor radio
Typ: METS-WR | ID: NC
technical features
- Sensor element: RTD Pt 100, Class A
- Maximum measuring range: -50...400 °C
- Potting: Electronics potted by parts
- Material: Process connection stainless steel 1.4571
- Process connection: 1/4", 3/8", 1/2", 3/4", 1", 1/4" NPT, 3/8" NPT, 1/2" NPT
- Output: Radio transceiver
- Radio range: internal antenna 20 m / external antenna 100 m
- Frequency: 868 MHz / 916 MHz
- Supply: Lithium-ion battery pack
- Configuration: Software
- Connection: M12x1 (Charging of accumulator)
- Protection: at least IP65
ME-OEM-Transmitter *'*
Type: ME-OEM | ID: OE
technical features
- Input: RTD Pt100, strain gauge, mV, mA, V, R, potentiometer, PWM,
- Input: TC type K, J, E, T, R, S, B / piezo
- Potting: electronics potted
- Process connection: customized, M12x1 female thread
- Output: 4...20 mA
- Limit value contacts: 2 electronically
- Configuration: with keys/software
- Electr. connection: M12, Super Seal, Deutsch, Bayonet, valve, cable
- Protection: at least degree IP65
Room temperature sensor *'*
Type: MITS | ID: MR
technical features
- Sensor: RTD Pt100, Pt1000, 2-, 3-, 4-wire
- Enclosure: inside completely potted
- Protecting tube: stainless steel 1.4571
- Range: -30...+60 °C
- Option: transmitter 4...20 mA
- Connection: MIL plug, valve plug, M12x1, cable
- Protection: at least IP65
Thermocouple with connection head B
type: TE-MR1 | ID: KC
technical features
- Sensor: 1x type J (Fe-CuNi) / 1x type K (NiCr-Ni) / 2x type J / 2x type K
- Protective sheathing: stainless steel 1.4571 (standard element) 2.4816 (M.I. element)
- Diameter sheath: 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 15 mm (standard) 1,5 / 3 / 4,5 / 6 mm (M.I. element)
- Nominal length: 50 / 100 / 160 / 200 / 250 / 400 / 600 / 1000 mm
- Process connection: 1/4" / 3/8" / 1/2" / 1" / 1/4NPT / 3/8NPT / 1/2NPT
- Terminal head: aluminium IP 54
Thermocouple with connection head B with GL-approval
type: TE-MR1G | ID: KC
technical features
- Sensor: 1x type J (Fe-CuNi) / 1x type K (NiCr-Ni) / 2x type J / 2x type K
- Protective sheathing: stainless steel 1.4571 (standard element) 2.4816 (M.I. element)
- Diameter sheath: 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 15 mm (standard) 1,5 / 3 / 4,5 / 6 mm (M.I. element)
- Nominal length: 50 / 100 / 160 / 200 / 250 / 400 / 600 / 1000 mm
- Process connection: 1/4" / 3/8" / 1/2" / 1" / 1/4NPT / 3/8NPT / 1/2NPT
- Terminal head: aluminium IP 54
Resistance thermometer with connection head B
type: WT-MR1 | ID: KD
technical features
- Sensor RTD: 1x PT100 / 1x Pt1000 / 2x Pt100 / 2x Pt1000 (2-, 3-, 4-wire)
- Accuracy: class A / class B / B1/2DIN / B1/3DIN / B1/10DIN
- Protective sheathing: stainless steel 1.4571 (standard element) 2.4816 (M.I. element)
- Diameter sheath: 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 15 mm (standard) 3 / 4,5 / 6 mm (M.I. element)
- Nominal length: 50 / 100 / 160 / 200 / 250 / 400 / 600 / 1000 mm
- Process connection: 1/4" / 3/8" / 1/2" / 1" / 1/4NPT / 3/8NPT / 1/2NPT
- Terminal head: aluminium IP 54
ship
Resistance thermometer with connection head B and GL-approval
type: WT-MR1G | ID: KD
technical features
- Sensor RTD: 1x PT100 / 1x Pt1000 / 2x Pt100 / 2x Pt1000 (2-, 3-, 4-wire)
- Accuracy: class A / class B / B1/2DIN / B1/3DIN / B1/10DIN
- Protective sheathing: stainless steel 1.4571 (standard element) 2.4816 (M.I. element)
- Diameter sheath: 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 15 mm (standard) 3 / 4,5 / 6 mm (M.I. element)
- Nominal length: 50 / 100 / 160 / 200 / 250 / 400 / 600 / 1000 mm
- Process connection: 1/4" / 3/8" / 1/2" / 1" / 1/4NPT / 3/8NPT / 1/2NPT
- Terminal head: aluminium IP 54
Resistance thermometer with connection head B with GL-approval
Mineral insulated thermocouple
type: TE-MK1 | ID: KB
technical features
- Sensor: 1x type J (Fe-CuNi) / 1x type K (NiCr-Ni)
- Protective sheathing: 2.4816 (Inconel 600)
- Sleeve joint: 1.4571 (316Ti)
- Diameter sheath: 1,5 / 3 / 4,5 / 6 mm
- Nominal length: 100 mm / Option: other length
- Cable length: 2000 mm / Option: other length
- Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
- Connection: open ends / TE-plug
Mineral insulated thermocouple with GL-approval
type: TE-MK1G | ID: KB
technical features
- Sensor: 1x type J (Fe-CuNi) / 1x type K (NiCr-Ni)
- Protective sheathing: 2.4816 (Inconel 600)
- Sleeve joint: 1.4571 (316Ti)
- Diameter sheath: 1,9 / 3 / 4,5 / 6 mm
- Nominal length: 100 mm / Option: other length
- Cable length: 2000 mm / Option: other length
- Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
- Connection: open ends / TE-plug
Mineral insulated resistance thermometer
type: WT-MK1 | ID: KM
technical features
- Sensor RTD: 1x PT100 / 1x Pt1000 / 2x Pt100 / 2x Pt1000 (2-, 3-, 4-wire)
- Accuracy: class A / class B / B1/2DIN / B1/3DIN / B1/10DIN
- Protective sheathing: stainless steel 1.4401
- Sleeve joint: stainless steel.4571 (316Ti)
- Diameter sheath: 1,5 / 3 / 4,5 / 6 mm
- Nominal length: 100 mm / Option: other length
- Cable length: 2000 mm / Option: other length
- Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
- Connection: open ends
Mineral insulated resistance thermometer with GL-approval
type: WT-MK1G | ID: KM
technical features
- Sensor RTD: 1x PT100 / 1x Pt1000 / 2x Pt100 / 2x Pt1000 (2-, 3-, 4-wire)
- Accuracy: Class A / class B / B1/2 DIN / B1/3 DIN / B1/10DIN
- Protective sheathing: stainless steel 1.4401
- Sleeve joint: stainless steel.4571 (316Ti)
- Diameter thermowell: 1,9 / 3 / 4,5 / 6 mm
- Nominal length: 100 mm / Option: other length
- Cable length: 2000 mm / Option: other length
- Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
- Connection: open wire ends
Thermocouple cable sensor
type: TE-K1 | ID: KT
technical features
- Sensor: 1x type J (Fe-CuNi) / 1x type K (NiCr-Ni)
- Protective sheathing: 1.4571, diameter: 4 / 5 / 6 mm
- Nominal length: 30 (d = 4) / 50 (d=4, d = 5) / 46 (d = 6) / 70 (d = 6) mm
- Option: other length
- Cable length: 2000 mm / Option: other length
- Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
- Antikink: heat shrinkable sleeve / spring / without
- Connection: open ends / TE-plug
Thermocouple cable sensor with GL-approval
type: TE-K1G | ID: KT
technical features
- Sensor: 1x type J (Fe-CuNi) / 1x type K (NiCr-Ni)
- Protective sheathing: 1.4571, diameter: 4 / 5 / 6 mm
- Nominal length: 30 (d = 4) / 50 (d=4, d = 5) / 46 (d = 6) / 70 (d = 6) mm
- Option: other length
- Cable length: 2000 mm / Option: other length
- Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
- Antikink: heat shrinkable sleeve / spring / without
- Connection: open ends / TE-plug
Cable resistance thermometer
type: WT-K1 | ID: KW
technical features
- Sensor RTD: 1x PT100 / 1x Pt1000 / 2x Pt100 / 2x Pt1000 (2-, 3-, 4-wire)
- Accuracy: class A / class B / B1/2DIN / B1/3DIN / B1/10DIN
- Protective sheathing: stainless steel 1.4571
- Diameter sheath: 4 / 5 / 6 mm
- Nominal length: 30 (d = 4) / 50 (d=4, d = 5) / 46 (d = 6) / 70 (d = 6) mm
- Option: other length
- Cable length: 2000 mm / Option: other length
- Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
- Antikink: heat shrinkable sleeve / spring / without
- Connection: open ends
Cable resistance thermometer with GL-approval
type: WT-K1G | ID: KW
technical features
- Sensor RTD: 1x PT100 / 1x Pt1000 / 2x Pt100 / 2x Pt1000 (2-, 3-, 4-wire)
- Accuracy: class A / class B / B1/2DIN / B1/3DIN / B1/10DIN
- Protective sheathing: stainless steel 1.4571
- Diameter sheath: 4 / 5 / 6 mm
- Nominal length: 30 (d = 4) / 50 (d=4, d = 5) / 46 (d = 6) / 70 (d = 6) mm
- Option: other length
- Cable length: 2000 mm / Option: other length
- Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
- Antikink: heat shrinkable sleeve / spring / without
- Connection: open ends
Cable resistance thermometer with sleeve socket and GL-approval
type: WT-KHG | ID: KV
technical features
- Sensor RTD: 1x PT100 / 1x Pt1000 / 2x Pt100 / 2x Pt1000 (2-, 3-, 4-wire)
- Accuracy: class A / class B / B1/2DIN / B1/3DIN / B1/10DIN
- Protective sheathing: stainless steel 1.4571, diameter: 4 / 5 / 6 mm
- Nominal length: 25 (d = 4) / 45 (d=4, d = 5) / 41 (d = 6) / 65 (d = 6) mm
- Option: other length
- Cable length: 2000 mm / Option: other length
- Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
- Antikink: heat shrinkable sleeve / spring / without
- Connection: open ends
Cable resistance thermometer with sleeve socket with GL-approval
Cable resistance thermometer with sleeve socket
type: WT-KH | ID: KV
technical features
- Sensor RTD: 1x PT100 / 1x Pt1000 / 2x Pt100 / 2x Pt1000 (2-, 3-, 4-wire)
- Accuracy: class A / class B / B1/2DIN / B1/3DIN / B1/10DIN
- Protective sheathing: stainless steel 1.4571, diameter: 4 / 5 / 6 mm
- Nominal length: 25 (d = 4) / 45 (d=4, d = 5) / 41 (d = 6) / 65 (d = 6) mm
- Option: other length
- Cable length: 2000 mm / Option: other length
- Cable: PVC-PVC / PTFE-silicone / PTFE-PTFE / PTFE-braiding-PTFE, Fibreglass-Fibreglass-stainless steel braiding
- Antikink: heat shrinkable sleeve / spring / without
- Connection: open ends
Rail temperature sensor
type: STSBA | ID: ST
technical features
- Measurement element: Pt100, 4-wire, Class A
- Resolution: 0,1 °C
- Configuration: with PC, MS - Windows 3.11 or higher
- Operating surface "DTM - Control"
- Analog output 4...20 mA, invertable, 2-wire technics
- Temperature linear output
- Galvanic insulation
- Special steel case completely potted
Conductive Level Sensor
Typ: PT-HL-T-C | ID: UQ
technical features
- Ranges: 0...0,1 bar up to 0...25 bar
- Output: 4...20 mA
- Accuracy: 20% of span (conductivity)
- Temperature range: -10...+85 °C maximum with FEP-cable
- Material casing: CrNi steel 316L
- Electrical connection: Fixed cable, open end, 15 m (standard)
- Protection: IP68
- Pressure connection: CrNi: 1/2" B
- Immersion depth: 300 m maximum with PUR-cable
Climate sensor for rooms
type: RKS | ID: RK
technical features
- Temperature: Pt 100 (2-, 3-, 4-wire)
- Accuracy: class A - B - 1/2 DIN
- Measuring range: -40...+80 °C
- Humidity: 0...100 %rF
- Output humidity: 4...20 mA / 0...10 V / 2...10 V
- Connection: via screwed cable gland to terminal screws
- Enclosure: cast aluminium
- Optional: transmitter 4...20 mA / 2...10 V / 0...10 V
- Optional: Indicator (Input: 4...20 mA)
Room resistance thermometer
type: RWT | ID: RW
technical features
- Measuring element: Pt 100, Pt 1000, (2-, 3-, 4-wire) and semiconductor
- Connection: terminal screw via cable entry
- Protecting tube: stainless steel 1.4571 or chemically stable synthetic
- Measuring range: -50...+100°C
- Accuracy: class A - B - 1/2 - 1/3 - 1/5 - 1/10 DIN
- Optional: transmitter 4...20 mA / 2...10 V / 0...10 V
- Optianal: transmitter II 1G EEx ia IIC T4 / T5 / T6
- Enclosures: diecast aluminium / plastics
